• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.429-432
• /
• 2005

Geophysical investigations, as a non-invasive method, were conducted at the former gas station site contaminated with fuel hydrocarbons. GPR (Ground Penetrating Radar) survey was performed to locate buried objects such as USTs (Underground Storage Tanks) and fuel pipes which might serve as a origin of the site contamination. Additional GPR investigation and a resistivity survey were conducted to map water table and to characterize shallow geologic structures of the site. The results of the study have shown that seven USTs including one unknown UST and buried fuel pipes are present, and that the groundwater elevation varies with topography from approximately 1.5 to 3m below the surface and the water table is located in the residual soils above the bedrock in the site. The results also show that the geophysical methods can be a very useful tool for the characterization of the contaminated site.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.597-616
• /
• 2022

The Chungnam basin is a crucial area for studying the Mesozoic crustal evolutionary history of the Korean Peninsula. This study reports the revised geology and new isotopic ages from the northeastern Chungnam Basin based on detailed geological mapping and LA-ICP-MS zircon U-Pb analysis. Our renewed geologic map defines intra-basin, basin-bounding, and basement fault systems closely related to hydrothermal gold-bearing quartz vein injections. Here, we propose the directions of (micro)structural and geochronological future work to address issues on the relationship between the tectonic process, basin evolution, and hydrothermal fluid migration in the southwestern Korean Peninsula.

• Spatial Information Research
• /
• v.8 no.2
• /
• pp.301-315
• /
• 2000

Every, year, a great amount of site investigation data is collected on site to obtain sufficient conditions. Investigation of subsurface conditions is prerequisite to the design and construction of structures and also provides information on ground properties such as geologic formation and types of soil. This data set, which portrays real representation of ground conditions over the existing geologic and soil maps, could be further utilized for analyzing the subsurface conditions. It is therefore necessary to develope a subsurface exploration analysis system which is able to extract the valuable information from the heterogeneous, non-normalized subsurface investigation data. This paper presents the overall design scheme and implementation on a subsurface exploration analysis system. The analysis system employs one of data set such as bore-hole data. The clustering technique employed in the developed system makes a large volume of bore-hole data into several groups in terms of ground formation and geographical vicinity. As a result of clustering, each group or cluster consists of bore-hole data with similar characteristics of subsurface and geographical vicinity. In addition, each clustered data is displayed on digital topographical map with different color so that the analysis of site investigation data could be performed in more sensible ways.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.410-415
• /
• 2003

Ground subsidence has occurred in the downtown of Muan-eup in Korea. Integrated geophysical survey, including two-dimensional resistivity, CSMT(Controlled source magnetotelluric), magnetic, borehole logging, GPR and resistivity tomography, has been conducted to investigate the cause of subsidence and ground conditions. Since the target area is in the city downtown, there were no spaces for surface geophysical methods. To get regional geology and to facilitate the detailed geophysical interpretation in the survey area, two-dimensional resistivity, CSMT and magnetic surveys have been applied in the outer region of the downtown. From these results, we could accurately define the Gwangju fault system and estimate the geologic conditions in the downtown. For the detailed survey of the downtown area, resistivity tomography and borehole logging data have been acquired using a few tens of densely located boreholes. Among these survey results, borehole logging data provided the guide to classification of the rock type and we could define the geologic boundary of granite and limestone formations. From the resistivity tomograms of 42 sections, which are densely located enough to be interpreted in a three-dimensional manner, we could delineate the possible weak zones or cavities in the limestone formations. In particular, resistivity tomograms in the subsided area showed the real image of ground subsidence. The map of hazardous zone has been derived from the joint interpretation of these survey results and we could provide the possible reinforcement strategy in this area.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.1
• /
• pp.89-96
• /
• 2005

Due to fast development of digital equipments, various information techniques have been applied to the tunneling and a decision aid system based on IT has also been used during excavation stage. A PDA based informative tunneling method is, therefore, studied in this paper and the decision aids for tunneling using digital face mapping data as well as geologic information in terms of digital data is developed. For this, wireless network, mobile computer, CDMA and digital camera have been combined to generate the digital map of the tunnel face and reinforcement or excavation pattern can be estimated based on digitalized geologic conditions. Future studies will be concentrated on the enhancement of the PDA S/W so that reinforcement method as well as the amount of reinforcements can also be stored in the same DB. Furthermore, field application of the S/W will be undertaken and a virtual reality technique will also be introduced to visualize all the tunneling work on the computer monitor.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.137-146
• /
• 2014

The geology of the study area which is located in Samkoe-dong, Dong-gu, Daejeon city comprises black slate, limestone, and pebble-bearing phyllitic rock as meta-sedimentary rocks; and biotite granite and quartz porphyry intrusions. Face mapping revealed sliding in three or four sites of contained coaly slate, where the dip of the foliation and other discontinuities is parallel to the surface slope. The cause of the slope sliding is this parallelism as well as the swelling of the coaly slate when wet. In contrast, the slop on the opposite side of the road is relatively stable because the dip of the foliation and other discontinuities are oblique or normal to the surface slope. To ensure slope stability, a cut-and-cover tunnel was designed and constructed for the new road.

• The Journal of Engineering Geology
• /
• v.4 no.1
• /
• pp.43-55
• /
• 1994

Two thematic maps on environmental geology were produced in the Cheong-Ju area, with aids of GIS technique. They are landslide hazards & risk maps and cut-fill maps. The models of environmental geology map and digital database were established for creation of these maps by means of cartographic simulation in GIS. These special maps are very important for understanding the environmental characteristics of the study area, and can be applied in the establishment of the regional land use planning. For instance, the landslide hazard and risk map can play very important role in the road design, and cut- fill map in the construction work in the area. The scoring system for landslide analysis was developed through the evaluation of each environmental geologic factor in relation to the others and reflects the relative imporatance of each factor. The excavation index(easy, intermediate and difficult) was evaluated through cut-fill analysis, and they can be very useftil for assessing the degree of excavation difficulty.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.121-129
• /
• 2009

Today, it is difficult to re-use and share spatial information, because of the explosive growth of heterogeneous information and specific characters of spatial information accumulated by diverse local agency. A spatial analysis of subsurface spatial informa-tion, one of the National Spatial Data Infrastructure, needs related spatial information such as, topographical map, geologic map, underground facility map, etc. However, current methods using standard format or spatial datawarehouse cannot consider a se-mantic hetergenity. In this paper, the layered ontology model which consists of generic concept, measuremnt scale, spatial model, and subsurface spatial information has developed. Also, the current ontology building method pertained to human experts is a expensive and time-consuming process. We have developed the MDA-based metamodel(UML Profile) of ontology that can be a easy under-standing and flexiblity of environment change. The semantic quality of devleoped ontology model has evaluated by reasoning engine, Pellet. We expect to improve a semantic sharing, and strengthen capacities for developing GIS experts system using knowledge representation ability of ontology.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.1
• /
• pp.49-66
• /
• 2018

Volcano hazard mapping became a focus of scientific inquiry in the 1960s. Dwight Crandell and Don Mullineaux pioneered the geologic history approach with the concept of the past is the key to the future, to hazard mapping. The 1978 publication of the Mount St. Helens hazards assessment and forecast of an eruption in the near future, followed by the large eruption in 1980 demonstrated the utility of volcano hazards assessments and triggered huge growth in this area of volcano science. Numerical models of hazardous processes began to be developed and used for identifying hazardous areas in 1980s and have proliferated since the late 1990s. Model outputs are most useful and accurate when they are constrained by geological knowledge of the volcano. Volcanic Hazard maps can be broadly categorized into those that portray long-term unconditional volcanic hazards-maps showing all areas with some degree of hazard and those that are developed during an unrest or eruption crisis and take into account current monitoring, observation, and forecast information.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.1
• /
• pp.14-22
• /
• 2008

The forest soil sediment disasters occurred in Jinbu-myeon Pyeongchang county were investigated characteristics by the aerial photograph analysis. After digitizing from aerial photographs, forest soil sediment disaster sites were classified into 695 collapsed sites, 305 flowed sites and 199 sediment sites. DEM (Digital Elevation Model) were generated from 1 : 5,000 digital topographic map. Factors of geography, hydrology, biology, and geology were analyzed using DEM, geologic map, and forest stand map with aerial photographs by GIS spatial analysis technique. The forest soil sediment disasters were mainly occurred from southeastern slope to southwestern slope. In collapsed sit es, the average slope degree is $28.9^{\circ}$, the average flow length is 163.5m, the average area of drainage basin is 897$m^2$. In case of flowed sites, the average slope degree, flow length, the area of drainage basin and confluence order is $27.0^{\circ}$, 175m, 2,500$m^2$ and 1, respectively. In sediment sites, the average slope, flow length, the area of drainage basin and confluence order is $12.5^{\circ}$, 2,50m, 25,000$m^2$ and 4, respectively. Also the forest soil sediment disasters were occurred most of collapsed sites in the afforest land after felling and igneous rocks composed of granite.