• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.577-584
• /
• 2021

Electrical energy is an essential component in present societies, which is an important basis for our technological society. In the design of new power infrastructure, it is important to consider the psychological aspects of how our culture considers and aspects its development as an integral component of the community environment. The construction of new high voltage overhead transmission lines has become a controversial issue for public policy of government due to social opposition. The members of community are concerned about how these power lines may have an impact on their lives, basically caused by their effects on health and safety. The landscape and visual impact is one of the most impact that can be easily perceived for local community. The computer 3D simulation of new landscape is illustrated by a real life use corresponding to the selection of the power line route with least observability for local community. This paper used ArcGIS(geographic information system tool) for planning, survey, basic route and detailed route, route for implementation of transmission line corridor. Also, the paper showed the map of natural environment, living environment, safety and altitude using database of power line corridor, and transmission siting model was developed by this study. The suggested landscape of computer simulation with lowest visibility on a power line zone can contribute to reducing oppositions of local community and accelerating the construction of new power lines.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.10
• /
• pp.3-12
• /
• 2018

This research aims at analyzing the changes in residential environment after a residential environment improvement project focusing on the analysis into the physical environment of a residential environment improvement project, and examining in what direction the changes by residents' own efforts occurred after public support, such as infrastructure. The present residence development method has become different from the previous pulling down method and is focused on regeneration. By examining in what direction the target residence is being changed because of the development by residents' own efforts after the government's public investment at this time, this study also aims at investigating the direction to develop a guideline for residential improvement for later improvement of deteriorated residence. As for the contents of the analysis, changes in public support, such as infrastructure, and other areas after the residential environment improvement project were compared and analyzed from the land use, street system, and condition of buildings before the residential environment improvement project through field survey, geographic information system(GIS), registered land and building data and so on. The biggest change since the support from the government was that at the beginning of the project, the application of special provision of building laws and different financial supports led to lots of newly built buildings. Since then, their number has decreased rapidly, and in most cases, there have been some changes in part, such as changes in the use of land or repair of disposal tanks. Most newly built buildings were multi-household houses, and it has caused road capacity and parking lot capacity, etc., to be exceeded, which has worsened the pleasantness of the living environment. In addition, other problems have also appeared, for example, the lack of residence supporting facilities yet with a higher level of residential density. Regarding the changes in the residential environment after the residential environment improvement project, maintenance of houses were conducted in some degree as diverse alleviation policies to improve poor residence, yet the absence of the guideline for the direction of developing the whole district has made the residence environment more dense and deteriorated. To solve these problems, in advance to a residential improvement project, specific management methods based on short-, mid- and long-term plans for the direction of development by residents' own efforts and a sustainable guideline seem to be necessary.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.85-94
• /
• 2018

This study aims to investigate how easy pedestrians get around within/through the "Apartment Complexes (AC), " a common style of high-rise multi-family housing in Korea. Over the past six decades, the AC has been the most conventional way to provide standardized housing efficiently to address the problems of the shortage of housing and the substandard housing, due to the explosion of urban population with the rapid industrialization. The AC is a huge chunk of homeogenous multi-family housing, mostly condos with decent infrastructure, including parks, pedestrian passages, schools, ect. Both in the new town development and urban renewal programs have utilized the advantages of the AC. Since the design principals of AC tend to adopt the "protective design" to prevent cars and pedestrians coming outside from passing it, it has been criticised for dissecting the continuity of socioeconomic context in neighborhoods. The neo-traditional planning urbanists, including Jane Jacobs, emphasize that smaller blocks and grid road newtworks are the key in improving social, cultural, and economic vitality of the neighborhoods, because these design concepts allow more pedestrians and different types of people to be mixed in a neighborhood. In this study, we first adopted objective measures for pedestrian accessibility and pedestrian efficiency. These measures were used to calculate the lengths of shortest paths from residential buildings to the edges of AC. We tested the difference in shortest paths between the current pedestrian networks of AC and hypothetical grid networks on the AC, and the relative difference is considered as the pedestrian efficiency, using the network analysis function of Geographic Information Systems (GIS) and Python programming. We found from the randomly selected 30 ACs that the existing non-grid road networks in ACs are worse than the hypothesized grid networks, in terms of pedestrian efficiency. In average, pedestrians in AC with the conventional road networks have to walk than 25%, 26%, and 27% longer than the networks of $125{\times}45m$, $100{\times}45m$, and $75{\times}45m$, respectively. With the t-test analysis, we found the pedestrian efficiency of AC with the conventional network is lower than grid-networks. Many new urbanists stress, easiness of walking is one of the most import elements for community building and social bonds. With the findings from the objective measures of pedestrian accessibility and efficiency, the AC would have limitations to attract people outside into the AC itself, which would increase dis-connectivity with adjacent areas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.2
• /
• pp.93-101
• /
• 2021

Recently, with the urban redevelopment and the spread of the planned cities, there is increasing interest in the wind environment, which is related not only to design of buildings and landscaping but also to the comfortability of pedestrians. Numerical analysis for wind environment prediction is underway in many fields, such as dense areas of high-rise building or composition of the apartment complexes, a precisive 3D building model is essentially required in this process. Many studies conducted for wind environment analysis have typically used the method of creating a 3D model by utilizing the building layer included in the GIS (Geographic Information System) data. These data can easily and quickly observe the flow of atmosphere in a wide urban environment, but cannot be suitable for observing precisive flow of atmosphere, and in particular, the effect of a complicated structure of a single building on the flow of atmosphere cannot be calculated. Recently, drone photogrammetry has shown the advantage of being able to automatically perform building modeling based on a large number of images. In this study, we applied photogrammetry technology using a drone to evaluate the flow of atmosphere around two buildings located close to each other. Two 3D models were made into an automatic modeling technique and manual modeling technique. Auto-modeling technique is using an automatically generates a point cloud through photogrammetry and generating models through interpolation, and manual-modeling technique is a manually operated technique that individually generates 3D models based on point clouds. And then the flow of atmosphere for the two models was compared and analyzed. As a result, the wind environment of the two models showed a clear difference, and the model created by auto-modeling showed faster flow of atmosphere than the model created by manual modeling. Also in the case of the 3D mesh generated by auto-modeling showed the limitation of not proceeding an accurate analysis because the precise 3D shape was not reproduced in the closed area such as the porch of the building or the bridge between buildings.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.47-52
• /
• 2021

Recently, the share of wind power in energy markets has sharply increased with the active development of renewable energy internationally. In particular, large-scale wind farms are being developed far from the coast to make use of abundant wind resources and to reduce noise pollution. In addition to the electromagnetic interference (EMI) caused by offshore wind farms to coastal or air surveillance radars, it is necessary to investigate the EMI on global maritime distress and safety system (GMDSS) communications between ship and coastal stations. For this purpose, this study investigates whether the transmitted field of MF/HF band from a ship would be subject to interference or attenuation below the threshold at a coastal receiver. First, using geographic information system digital maps and 3D CAD models of wind turbines, the area of interest is electromagnetically modeled with patch models. Although high frequency analysis methods like Physical Optics are appropriate to analyze wide areas compared to its wavelength, the high frequency analysis method is first verified with an accurate low frequency analysis method by simplifying the surrounding area and turbines. As a result, the received wave power is almost the same regardless of whether the wind farms are located between ships and coastal stations. From this result, although wind turbines are large structures, the size is only a few wavelengths, so it does not interfere with the electric field of MF/HF distress communications.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1393-1405
• /
• 2020

UAV (Unmanned Aerial Vehicle) can acquire high-resolution images due to low-altitude flight, and it can be photographed at any time. Therefore, the UAV images can be updated at any time in map production. Due to these advantages, studies on the possibility of producing large-scale digital maps using UAV images are actively being conducted. Precise digital maps can be used as base data for digital twins or smart cites. For producing a precise digital map, precise sensor modeling using GCPs (Ground Control Points) must be preceded. In this study, geometric models of UAV images were established through a precision sensor modeling algorithm developed in house. Then, a digital map by stereo plotting was produced to evaluate the possibility of large-scale digital map. For this study, images and GCPs were acquired for Ganseok-dong, Incheon and Yeouido, Seoul. As a result of precision sensor modeling accuracy analysis, high accuracy was confirmed within 3 pixels of the average error of the checkpoints and 4 pixels of the RMSE was confirmed for the two study regions. As a result of the mapping accuracy analysis, it satisfied the 1:1,000 mapping accuracy announced by the NGII (National Geographic information Institute). Therefore, the precision sensor modeling technology suggested the possibility of producing a 1:1,000 large-scale digital map by UAV images.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1615-1627
• /
• 2020

The purpose of this study is to compare and analyze the performance of KOMPSAT-3 Digital Surface Model (DSM) made in overseas testbed area. To that end, we collected the KOMPSAT-3 in-track stereo image taken in San Francisco, the U.S. The stereo geometry elements (B/H, converse angle, etc.) of the stereo image taken were all found to be in the stable range. By applying precise sensor modeling using Ground Control Point (GCP) and DSM automatic generation technique, DSM with 1 m resolution was produced. Reference materials for evaluation and calibration are ground points with accuracy within 0.01 m from Compass Data Inc., 1 m resolution Elevation 1-DSM produced by Airbus. The precision sensor modeling accuracy of KOMPSAT-3 was within 0.5 m (RMSE) in horizontal and vertical directions. When the difference map was written between the generated DSM and the reference DSM, the mean and standard deviation were 0.61 m and 5.25 m respectively, but in some areas, they showed a large difference of more than 100 m. These areas appeared mainly in closed areas where high-rise buildings were concentrated. If KOMPSAT-3 tri-stereo images are used and various post-processing techniques are developed, it will be possible to produce DSM with more improved quality.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.43-54
• /
• 2020

This paper investigates the causal impact of the increase in institutional distance between two geographic regions on the flow of cross-border Venture Capital (VC) between the regions. While cross-border VCs are believed to have competitive advantages at identifying and managing promising startups in a local market compared to local counterparts, the discrepancy in institutional characteristics between two markets exacerbates the difficulty of credible information exchange and negotiation, significantly increasing transaction cost related to a cross-border venture capital investment. This study conducts a difference-in-difference analysis to examine the relationship between institutional distance and the flow of cross-border VC investment using the fact that the official adoption of the Euro currency by member countries of the European Union except the UK created an institutional chasm between the UK and other EU member countries. The outcomes of the analysis suggests that UK-based VCs significantly decreased the VC investment into EU-based startups and that EU-based VCs reduced the investment into UK-based startups. The results have meaningful implications for understanding the impact of the change in institutional difference on cross-border VC investment, which seems to increasingly take place with the recent trend of de-globalization and the rise of protectionism.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.4
• /
• pp.31-46
• /
• 2021

In South Korea, there is a growing domestic need for a biotope map which contains ecological and environmental geographic information of a city. After the production of a Urban Ecological Maps(biotope map) by the Seoul metropolitan government in 2000, Natural Environment Conservation Act was revised in 2017 to make it mandatory for a local government to draw up its own urban ecological map. The aim of the present study was to find out ways to utilize an urban ecological map as a mean of communication between natural environment planning and urban planning sectors in a preliminary stage before introducing a big framework of 'environmental and ecological planning.' The northern area of Incheon metropolitan city was selected as the target area for this study. The major research content includes a comparative analysis of special-purpose zones, urban planning zones, restricted development zones, and conservation forests with focus on biotope types and Grades 1 of 'Biotope Type Assessment.' Farmland biotopes and forest biotopes within an area designated as an urban zone (residential, commercial and industrial zones) need to be redesignated as a zone which can conserve them. Especially considering a high possibility of damage to a large scale of natural green areas, these areas need to be readjusted immediately. If the entire area designated as an urban planning zone is to be developed, it is likely to cause serious damage to natural biotopes in the area (56.2%), including farmland biotope (30.4%), forest biotope (15.0%) and grassland biotope (10.8%), and thus, readjustment is needed. In case of a conservation forest, as it can possibly be damaged by the designation of special-purpose zones, it is necessary to match the designation of conservation forests or a special-purpose zones with their biotope types. In conclusion, we present a variety of thematic maps for utilization of an urban ecological map and propose a phase-specific environmental and ecological plan. Phase 1 is the establishment of a urban plan in consideration of ecological status; Phase 2 is the independent establishment of an environmental and ecological plan by an environment department; Phase 3 is an integrated management of ecological planning system and urban planning system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.459-466
• /
• 2021

The present study was conducted to propose future research directions for weed management by examining the current trends of research on weed occurrence according to cropping systems. The cropping systems are developed for the efficient use of arable land, and the weed flora changes according to the management practices of a given cropping system. In particular, weed occurrence can be reduced by altering the soil environment. In addition, cultivation methods, such as tillage, affect the weed seed bank in the soil, thus altering the pattern of weed occurrence. Here, we propose three weed management practices according to the cropping system. First, it is necessary to develop a model that can classify weed species by analyzing young seedlings and can predict the flora in the field. Second, it is important to manage the cropping system history and establish a database of agricultural information, which can be linked to meteorological and geographic data. Third, it is critical to estimate the weed occurrence and soil seed bank dynamics, based on which a cropping system platform and digitalization technology can be developed. In the future, the prediction of weed occurrence and control according to the cropping system will contribute to sustainable agriculture by reducing the use of herbicides and solving the problems of resistant weeds.