• Journal of the Korean Geophysical Society
• /
• v.3 no.1
• /
• pp.25-36
• /
• 2000

3-D Spectrograms for 22 events are drawn to discern about whether those are earthquakes or explosions. Generally, in case of explosions relative to the case of earthquakes, amplitude of P phase is more dominantly shown. According to the results on logarithm of spectral ratio of P (Pn, Pg)/Lg after removing free-surface effects from 3-D (U-D, N-S, E-W) seismogram, $-1.2{\sim}-0.9$ is shown for earthquakes and $-0.7{\sim}-0.1$ if shown for explosions. This result is consistent with previous researches (Kim Park, 1997) that -0.6 of spectral ratio between P and Lg after taking logarithm may be the criterion for the discrimination between earthquakes and explosions in Korea. In addition, Complexity is applied to two events as another discrimination method. The value of Complexity of explosion is much smaller than that of earthquake. This may be due to well-developed P-wave in explosion compared to that in earthquake. This result is in accordance with that of 3-D Spectrogram.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.1-11
• /
• 2018

Mapping accurate spatial information is important for constructing three-dimensional (3D) spatial models and managing artificial facilities, and, especially, mapping road centerlines is necessary for constructing accurate road maps. This research developed a semi-automatic methodology for mapping road centerlines using the MMS(Mobile Mapping System) LiDAR(Light Detection And Ranging) point cloud as follows. First, the intensity image was generated from the given MMS LiDAR data through the interpolation method. Next, the line segments were extracted from the intensity image through the edge detection technique. Finally, the road centerline segments were manually selected among the extracted line segments. The statistical results showed that the generated road centerlines had 0.065 m overall accuracy but had some errors in the areas near road signs.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.19-26
• /
• 2002

To provide 3D GSIS data on the internet, 3D data structures need to be researched and applied for spatial analysis for subsurface modeling. As for GSIS software R&D trend the following things have pointed out : 3-dimensional geo-processing technologies, internet-based application system development, distributed processing technologies for large volume of spatial information, real-time geo-data processing methodologies, Among them research scope within Internet-based application system or Web-based GSIS generally contains core parts of software development such as Internet application, large volume of spatial database handling, real-time spatial data processing, spatial data transfer and transformation, and volumetric display of processing results. This study shows the method of providing 3D GSIS on the internet using VRML model, which are made of DEM data, draped aerial photo, and VRML script programming. And it is also studied that offering 3D GSIS engine on the internet and precise texture mapping using satellite image and aerial photos.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.423-431
• /
• 2003

This study presents on generation coefficients of the RFM using GEO-level stereo images of the IKONOS satellite. 3-D positioning and DEM generation of this model on the test field. In result, the maximum error of image coordinates acquired by the upward transform of the RFM did nat exceed 8 pixels. DEM was generated with kriging interpolation extracted three dimensional ground coordinate to rational quadratic function form, me compared it to reference digital elevation model made from 1:5,000 digital map and 1:1,000 digital map, and so, could generate digital elevation model in the accuracy as average RMSE of elevation was ${\pm}$ 3∼5 m in RFM.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.31-38
• /
• 2004

This paper is about to implement a system for ground water safety evaluation. Since ground water quality is affected from the contamination source of surface water, one can estimate the magnitude of affection and the source themselves. This paper suggests a method to evaluate the spatial relationship of ground water and its contamination sources, using“contain”and“distance”operators in GIS. The research area is the Kunsan City in Chonbuk province, and are 75th wells those are located between the 4th alluvium land types. The results of measured chemical factors and results of related evaluation of these wells are stored and represented in ZEUS 2000 GIS DBMS, and an interface for searching and studying, is implemented by using ZEUS/SQLX, ZEUS/COM, and Visual Basic 6.0 programming languages. After this research, the spatial relationship between hydro-geological geo-objects and ground water is verified and a efficient evaluation system using GIS is suggested. It is the topic of further study that tries to calibrate the suggested evaluation model by applying it to wider area.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.358-363
• /
• 2008

Through this study, 2D multibody dynamics models for analysis of train collisions have been developed to evaluate the crashworthiness requirements of the TSI regulation. The crashworthiness regulation requires some performance requirements for two heavy collision accident scenarios; a train-to-train collision at the relative speed of 36 kph, and a collision against a standard deformable obstacle of 15 ton at 110 kph. The complete train set will be composed of hybrid model with 2D and 1D model. Using numerical analysis of the hybrid model, some crashworthy design were evaluated in terms of mean crush forces and energy absorptions for main crushable structures and devices. especially, 2D model can evaluate overriding effect in train collisions. It is shown from the simulation results that the suggested hybrid model can easily evaluate the crashworthiness requirements.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.120-137
• /
• 1997

Han's model, which is able to analyze optical communication between earth station and geo-satellite as a function of atmospheric conditions and elevation angles. is presented. In Han's model, atmospheric conditions are roughly classified into six basic types; clear sky, cloud, haze, fog, rain and snow. Data rate satisfying for the BER below $10^{-7}$ is analyzed by Han's model in case of up-link and down-link, respectively. Data rate is more limited by up-link than by down-link because the pointing loss caused by atmosphere on the up-link is greater than the spatial coherence degradation caused by atmosphere on the down-link.

• Korean Journal of Materials Research
• /
• v.11 no.9
• /
• pp.763-768
• /
• 2001

Molybdenum-based thermal spray powder is widely used for coating the moving parts of the internal combustion engines due to its excellent wear resistance. A composite powder of the $Mo_{40}(Al_{1-x}Si_x)_{60}$ system was synthesized using the SHS method. The synthesized bulk was pulverized and specially treated to produce thermal spray powder. It was found that the synthesis reaction consisted of two-steps: the formation of $Al_8/Mo_3$ and the formation of Mo(Al,Si)$_2$. Both the temperature and the rate of the SHS reaction linearly increased with the increase of the value of x in $Mo_{40}(Al_{1-x}Si_x)_{60}$, The temperature and the rate of the reaction were also affected by the compacting density of the specimens, exhibiting the maximum valves at 62% and 60%, respectively. Since spherical shape is advantageous to the thermal spraying process, shape-control of the powder was attempted with PVA as a binding additive, resulting in the successful production of almost perfectly spherical powder of 80 $\mu\textrm{m}$ Ø$(d_{50})$ mean particle size.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.7
• /
• pp.5-13
• /
• 2016

This research is focused on the seepage behavior of embankment which had the weak zone with big permeability. The distributed TDR (Time Domain Reflectometer) and point sensors such as settlement gauge, pore water pressuremeter, vertical total stressmeter, and FDR (Frequency Domain Reflectometer) sensor were used to measure the seepage characteristics and embankment behavior. Also, the measured data were compared to the data of 2-D and 3-D numerical analysis. The dimension of model embankment was 7 m length, 5 m width and 1.5 m height, which is composed of fine-grained sands and the water level of embankment was 1.3 m height. The seepage behavior of measuring and numerical analysis were very similar, it means that the proper sensing system can monitor the real-time safety of embankment. The result by 2-D and 3-D numerical analysis showed similar saturation processing, however in case of weak zone, the phreatic lines of 2-D showed faster movement than that of 3-D analysis, and finally they converged.

• Geomechanics and Engineering
• /
• v.34 no.1
• /
• pp.29-41
• /
• 2023

The 3D geospatial modeling of geotechnical information can aid in understanding the geotechnical characteristic values of the continuous subsurface at construction sites. In this study, a geostatistical optimization model for the three-dimensional (3D) mapping of subsurface stratification and the SPT-N value based on a trial-and-error rule was developed and applied to a dam emergency spillway site in South Korea. Geospatial database development for a geotechnical investigation, reconstitution of the target grid volume, and detection of outliers in the borehole dataset were implemented prior to the 3D modeling. For the site-specific subsurface stratification of the engineering geo-layer, we developed an integration method for the borehole and geophysical survey datasets based on the geostatistical optimization procedure of ordinary kriging and sequential Gaussian simulation (SGS) by comparing their cross-validation-based prediction residuals. We also developed an optimization technique based on SGS for estimating the 3D geometry of the SPT-N value. This method involves quantitatively testing the reliability of SGS and selecting the realizations with a high estimation accuracy. Boring tests were performed for validation, and the proposed method yielded more accurate prediction results and reproduced the spatial distribution of geotechnical information more effectively than the conventional geostatistical approach.