• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.63-64
• /
• 2017

This paper proposes a speed estimator for sensorless control of diesel-generator (genset) systems, where the speed of the genset is calculated from the back-EMF frequency of the generator. The back-EMF frequency is extracted from a phase output current by using multiple second-order generalized integrators (SOGIs) connected in parallel and series and separated frequency-locked loops. The proposed method (PS-SOGI-FLL) is able to estimate the fundamental frequency in the distorted output current with high accuracy and strong robustness. Simulation results are shown to verify the validity of the proposed method.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.4
• /
• pp.71-78
• /
• 2017

New concept rotary engine initial prototype has been developed. Engine motoring, compressor pressure and fuel combustion were tested for engine mechanism and operability check. Merits and demerits, applicable areas of the engine have been investigated against reciprocating and Wankel rotary engines. It was found that this engine is best fit for small aircraft and it is better than existing engines for motorcycle, portable and hybrid car Genset too.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.233-234
• /
• 2016

본 논문에서는 소형 어선의 전기 시스템을 DC 마이크로그리드의 관점에서 설계하고, 선박의 동력원인 엔진-발전기를 가변속 제어함으로써 선박 전력 계통의 효율을 개선하고자 한다. 선박 전력 계통은 물리적으로 육지 계통과 분리된 마이크로그리드의 형태를 갖추고 있다. 때문에 소형 기계 추진 어선의 경우, 추진을 위한 엔진뿐만 아니라 추가적으로 선내 전력을 공급하기 위한 엔진-발전기를 갖출 필요가 있다. 이에 반해 전기 추진 어선은 하나의 엔진-발전기 세트로 추진과 선내 전력 공급이 모두 가능하다. 하지만 어선이 정지 상태에서 조업을 할 때에 전력 부하량이 작기 때문에 엔진의 저부하 운전 문제가 발생한다. 본 논문에서는 이를 해결하기 위하여, DC마이크로그리드를 어선에 적용하여 엔진 가변속을 적용하고자 한다. 통상적으로 20% 내외의 부하율로 운용되는 엔진에 가변속 제어를 적용하면 20% 이상의 연비 개선 효과를 기대할 수 있다. 이러한 DC마이크로그리드 어선의 연비 개선 효과를 항해와 조업으로 구분하여 시뮬레이션을 통해 예측하였다.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.100-102
• /
• 2001

This paper resents digital controller of emergency power generator system. The controller offers an integrated alternative for Genset control, metering and remote monitoring. Proposed controller used 80c196kc one chip microprocessor for digital control, it measures parameters of generator and provides output signals to control starting and stopping of generator. Additionally protection and alarm functions are considered to system stability. As almost parts of controller are embedded by digital microprocessor and FPGA techniques, the controller has a more flexible feature and an improvement of precision. The developed system has a big merit economically and is suitable for any kW size generator.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.44-51
• /
• 2014

This paper describes system definition of the extended range EV and presents cruising strategy of EV mode and ER mode. Also high voltage battery strategic SOC could be indicated and compared depends on various generator working cycles. A C-segment SUV has been produced and carried out cruising test in order to validate on highway, city and hill climbing road. This paper shows advantages and disadvantages of SOC variation on each road environments and presents the strategies as the cruising test results. On the basis of the test result, this paper suggests future works and research directions for strategy of battery management to extended range EV.