• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1331-1333
• /
• 2004

There are many types of BOM, such as EBOM, MBOM, As-Built BOM, As-Designed BOM, Generic BOM, Customized BOM, etc. We should define an adequate BOM to achieve some purposes. In this paper, we proposed BOM structure for EMU Maintenance Information System. First of all, we define Master BOM including all part's information, such as 2D/3D drawings, images, specification, etc. And then we define Object BOM that is functional structure for someone to achieve maintenance works. Object BOM will be applied to configure sales orders, explode aggregate forecasts, and calculate standard cost.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.235-245
• /
• 2015

This paper proposes a reactive current assignment and control strategy for a doubly-fed induction generator (DFIG) based wind-turbine generation system under generic grid voltage sag or swell conditions. The system's active and reactive power constrains during grid faults are investigated with both the grid- and rotor-side convertors (GSC and RSC) maximum ampere limits considered. To meet the latest grid codes, especially the low- and high-voltage ride-through (LVRT and HVRT) requirements, an adaptive reactive current control scheme is investigated. In addition, a torque-oscillation suppression technique is designed to reduce the mechanism stress on turbine systems caused by intensive voltage variations. Simulation and experiment studies demonstrate the feasibility and effectiveness of the proposed control scheme to enhance the fault ride-through (FRT) capability of DFIG-based wind turbines during violent changes in grid voltage.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.263-266
• /
• 2009

IEC 61850 based substation automation system is operating with Generic Object Oriented Substation Event message when an IED need to send an important signal to other IEDs or receive the signals from another IED such as trip and interlock. So interoperability of substation automation system may be assured throughout the verification of IED GOOSE. This paper shows a testing contents for GOOSE subscription and publish of IEC 61850 based IED and describes how to analysis the result of GOOSE testing. Now domestic IED completed by GOOSE test of this study are working in KEPCO test field.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.408-410
• /
• 2003

There are many types of BOM in the industrial world. Types of BOM include EBOM, MBOM, As-Built BOM, As-Designed BOM, Generic BOM, Customized BOM, etc. We should define an adequate BOM for a given need or application. In this paper, we proposed BOM structure for EMU Maintenance Information System. The proposed BOM structure is composed of Location BOM, Equipment BOM, and Maintenance BOM. Location BOM is functional structure for someone to achieve specific works. Equipment BOM is a bill of an independent object to be repaired, and maintained. Maintenance BOM includes all parts to compose Equipment BOM. The BOM structure will be applied to configure sales orders, explode aggregate forecasts, and calculate standard cost.

• Journal of Korean Society of Transportation
• /
• v.12 no.3
• /
• pp.49-64
• /
• 1994

The development of a mathematical modular framework based on Petri Network theory to model a traffic network is the subject of this paper. Traffic intersections are the primitive elements of a transportation network and are characterized as event driven and asynchronous systems. Petri network have been utilized to model these discrete event systems; further analysis of their structure can reveal information relevant to the concurrency, parallelism, synchronization, and deadlock avoidance issuse. The Petri-net based model of a generic traffic junction is presented. These modular networks are effective in synchronizing their components and can be used for modeling purposes of an asynchronous large scale transportation system. The derived model is suitable for simulations on a multiprocessor computer since its program execution safety is secured. The software pseudocode for simulating a transportation network model on a multiprocessor system is presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.911-914
• /
• 2009

멀티 네트워크는 여러 무선 접속 기술을 동시에 접속할 수 있도록 구성된 시스템으로 정의되며 Ambient Networks(ANs) 프로젝트로 연구가 진행 중에 있다. 우선 ANs은 여러 다른 무선 장치와 Multi-Radio Access(MRA) 기술이 군집된 동적 통신 환경에서의 네트워킹 개념이다. 따라서 3 세대로 불리는 Global System for Mobile communications(GSM), Universal Mobile Telecommunications System(UMTS) 그리고 무선랜(WLAN)등 다양한 네트워크 인터페이스로 구성된 mobile terminal(MT)이 다양한 무선 접속 기술을 지원하는 멀티네트워크에 접속하여 "Always Best Connected" 관점에서 효율적 접속 서비스를 제공 받아야 한다. 본 논문에서는 멀티네트워크 환경에서 단말에 high-performance를 제공하기 위한 자원관리 모델인 MRRM/RARM(Multi-Radio/Radio Access Resource Management)과 GLL(Generic Link Layer)에 대한 기술 요소를 정의하고 분석한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.481-484
• /
• 2009

멀티 네트워크는 여러 무선 접속 기술을 동시에 접속할 수 있도록 구성된 시스템으로 정의되며 Ambient Networks(ANs) 프로젝트로 연구가 진행 중에 있다. 우선 ANs은 여러 다른 무선 장치와 Multi-Radio Access(MRA) 기술이 군집된 동적 통신 환경에서의 네트워킹 개념이다. 따라서 3 세대로 불리는 Global System for Mobile communications(GSM), Universal Mobile Telecommunications System(UMTS) 그리고 무선랜(WLAN)등 다양한 네트워크 인터페이스로 구성된 mobile terminal(MT)이 다양한 무선 접속 기술을 지원하는 멀티네트워크에 접속하여 "Always Best Connected" 관점에서 효율적 접속 서비스를 제공 받아야 한다. 본 논문에서는 멀티네트워크 환경에서 단말에 high-performance를 제공하기 위한 자원관리 모델인 MRRM/RARM(Multi-Radio/Radio Access Resource Management)과 GLL(Generic Link Layer)에 대한 기술 요소를 정의하고 분석한다.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.199-207
• /
• 2023

Trend Impact Analysis is a prominent hybrid method has been used in future studies with a modified surprise- free forecast. It considers experts' perceptions about how future events may change the surprise-free forecast. It is an advanced forecasting tool used in futures studies for identifying, understanding and analyzing the consequences of unprecedented events on future trends. In this paper, we propose an advanced mechanism to generate more justifiable estimates to the probability of occurrence of an unprecedented event as a function of time with different degrees of severity using adaptive neuro-fuzzy inference system (ANFIS). The key idea of the paper is to enhance the generic process of reasoning with fuzzy logic and neural network by adding the additional step of attributes simulation, as unprecedented events do not occur all of a sudden but rather their occurrence is affected by change in the values of a set of attributes. An ANFIS approach is used to identify the occurrence and severity of an event, depending on the values of its trigger attributes.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.217-224
• /
• 2003

ISO 14649 is a new interface (or language) standard for the CAD-CAM -CNC chain, currently under establishment by ISO TC184 SCI and SC4 . Upon completion, it will replace ISO 6983, so called M amp; G codes used for CNC since 1950' s. As the new language is being established, a new CNC controller called STEP-CNC (STEP­compliant CNC), capable of carrying out various intelligent tasks using the new language as an input, receives worldwide attention. In this paper, we present a distributed architecture for STEP-NC system based on the generic paradigm of STEP-NC. The STEP-NC system is consisted of 3 sub-systems: 1) CGS (Code Generation System), 2) CES (Code Edit System), and 3) ACS (Autonomous Control System). Also presented in this paper is algorithm for delta volume decomposition, a crucial algorithm for developing CGS. First method is based on the cutting tool and the second method is based on the turning features commonly used in the shop floor. An illustrative example is given to compare the two methods, and to illustrate usage scenario of the delta volume in the turning STEP- NC system under development.

• KIEAE Journal
• /
• v.6 no.4
• /
• pp.11-16
• /
• 2006

This work has carried out some preliminary studies for the utilization of a solar mini-dish system capable of concentrating solar rays to higher densities. A typical mini-dish system considered employs an array of solar mini-dishes where major components are light and compact. It consists of small mini-dishes, optical fiber bundles and diffusers at the end. Each mini-dish (typically has a 20 to 30 cm in diameter) is designed with a simple parabolic profile, concentrating sunlight (after the glass glazing cover to avoid dust deposition on the reflector and facilitate cleaning) onto a centrally-located small mirror which is placed on the bottom side of the transparent glass cover. The focused sunlight is reflected by the mirror surface onto a focal point where the receiving aperture of a homogenizer is located. Optical fibers are used to carry high-density solar rays to the other end where diffusers are mounted for indoor illumination. The proposed high density mini-dish system could make an efficient daylighting system as it excludes large moving parts and expandable if necessary. Each component of the system could be made from the off-the-shelf technology and thus, make the generic unit inexpensive to manufacture. Depending on spatial demand or characteristics, the amount of introducing daylight could be controlled. Preliminary tests have been carried out for a trial system to check any functional problems when in operation. Suggestions are also made to improve the design enhancing its performance and applicability.