• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.881-889
• /
• 2022

As interest in environmental pollution caused by ship emissions is increasing worldwide, many studies are being conducted on the development of systems that increase energy efficiency to reduce ship emissions. In order to test the energy management system controller driven in real time on a large ship, it is necessary to perform the test through the simulator. In this study, addresses were set for each signal according to Modbus TCP/IP so that each control system and energy management system could be linked, and the algorithm was configured according to the signal flow. In addition, the signal generator was designed and manufactured so that each controller could artificially generate the signal collected from the vessel. As a result of the simulator production and interlocking, it was confirmed that each controller operated in real time performed its role appropriately, and that the algorithm of the ship energy management system was properly applied.

• Journal of the Korea Society for Simulation
• /
• v.33 no.1
• /
• pp.19-26
• /
• 2024

The phase-type, PH, distribution is defined as the time to absorption into a terminal state in a continuous-time Markov chain. As the PH distribution includes family of exponential distributions, it has been widely used in stochastic models. Since the PH distribution is represented and generated by an initial probability vector and a generator matrix which is called the Markovian representation, we need to find a vector and a matrix that are consistent with given set of moments if we want simulate a PH distribution. In this paper, we propose an approach to simulate a PH distribution based on distribution function which can be obtained directly from moments. For the simulation of PH distribution of order 2, closed-form formula and streamlined procedures are given based on the Jordan decomposition and the minimal Laplace transform which is computationally more efficient than the moment matching methods for the Markovian representation. Our approach can be used more effectively than the Markovian representation in generating higher order PH distribution in queueing network simulation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.5
• /
• pp.384-391
• /
• 2023

In modern electronic warfare, a number of radar emitters are in operation, causing radar receivers to receive high-density signal pulses that occur simultaneously. To analyze the radar signals more accurately and identify enemies, the sorting process of high-density radar signals is very important before analysis. Recently, machine learning algorithms, specifically K-means clustering, are the subject of research aimed at improving the accuracy of radar signal sorting. One of the challenges faced by these studies is that the clustering results can vary depending on how the initial points are selected and how many clusters number are set. This paper introduces a repeated K-means clustering algorithm that aims to accurately cluster all data by identifying and addressing false clusters in the radar sorting problem. To verify the performance of the proposed algorithm, experiments are conducted by applying it to simulated signals that are generated by a signal generator.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.1
• /
• pp.25-31
• /
• 2009

An analytical method of $^{99}Tc$ concentration in soil was set up and discussed considering the $^{99}Tc$ concentration in Korean soil measured with its analytical method. A selective TEVA resin was used to separate and purify the $^{99}Tc$ in the soil sample. $^{99m}Tc$ from a commercial $^{99}Mo/^{99m}Tc$ generator was used as a yield tracer for the chemical separation of $^{99}Tc$ and its problem when using $^{99m}Tc$ as a tracer was discussed. The chemical recovery yield of $^{99}Tc$ was above 70%. The optimum conditions of inductively coupled plasma mass spectrometry system(ICP-MS) were set up to determine the $^{99}Tc$ after the separation process. The minimum detectable activity(MDA) was 15 mBq/kg-dry in this analytical procedure. The $^{99}Tc$ concentration in soils of Jeju and Kori were measured in the rage of 33.73-89.16 mBq/kg-dry. Those values were less than those reported in other countries and seemed to be originated from atmospheric fallout.

• Food Science of Animal Resources
• /
• v.18 no.3
• /
• pp.203-208
• /
• 1998

The study was carried out to screen mutagenicity of smoking materials for the determination of optimum smoking temperature for meat products. Wood materials employed for smoking were oak and apple trees. Temperatures of the generator for manufacturing of smoke flavoring were set to 250$^{\circ}C$, 400$^{\circ}C$ and 500$^{\circ}C$, respectively. Mutagenic activities of smoke flavoring were assayed according to Ames test using Salmonella typhimurium TA98 and TA 100. In oak wood smoke flavoring, Salmonella typhimurium TA98 without S-9 mix showed strong mutagenic activities at the concentration of 6$\mu\textrm{g}$/plate(250$^{\circ}C$), 4$\mu\textrm{g}$/plate(400$^{circ}C$) and 6$\mu\textrm{g}$/plate(500$^{\circ}C$). Salmonella typhimurium TA100 with S-9 mix showed strong mutagenic activities at the concentration of 10$\mu\textrm{g}$/plate(250$^{\circ}C$), 20$\mu\textrm{g}$/plate(400$^{\circ}C$) and 10$\mu\textrm{g}$/plate(500$^{\circ}C$). Salmonella typhimurium TA98 with S-9 mix showed strong mutagenic activities at the concentration of 30$\mu\textrm{g}$/plate(250$^{\circ}C$), 40$\mu\textrm{g}$/plate(400$^{\circ}C$) and 20$\mu\textrm{g}$/plate(500$^{\circ}C$). Salmonella typhimurium TA100 with S-9 mix showed strong mutagenic activities at the concentration of 30$\mu\textrm{g}$/plate(250$^{\circ}C$), 50$\mu\textrm{g}$/plate(400$^{\circ}C$) and 20$\mu\textrm{g}$/plate(500$^{\circ}C$). Salmonella typhimurium TA100 without S-9 mix showed strong mutagenic activities at the concentration of 10$\mu\textrm{g}$/plate(250$^{\circ}C$), 20$\mu\textrm{g}$/plate(400$^{\circ}C$) and 20$\mu\textrm{g}$/plate(500$^{\circ}C$). Salmonella typhimurium TA98 with S-9 mix showed strong mutagenic activities at the concentration of 30$\mu\textrm{g}$/plate(250$^{\circ}C$), 40$\mu\textrm{g}$/plate(400$^{\circ}C$) and30$\mu\textrm{g}$/plate(500$^{\circ}C$). Salmonella typhimurium TA100 with S-9 mix showed strong mutagenic activities at the concentrations 30$\mu\textrm{g}$/plate(500$^{\circ}C$). Salmonella typhimurium TA100 with S-9 mix showed strong mutagenic activities at the concentration of 30$\mu\textrm{g}$/plate(250$^{\circ}C$), 20$\mu\textrm{g}$/plate(400$^{\circ}C$) and 30$\mu\textrm{g}$/plate(500$^{\circ}C$). From these results, it could be concluded that optimum smoking temperature for meat products should be set below 400$^{\circ}C$, that the compounds like benzo[a]pyrene etc. contain a variety of mutagenic potentials, which could be generated at the higher smoking temperature.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.431-431
• /
• 2016

J 호소는 1942년도에 충청남도 아산시 선장면에 설치된 농업용 저수지로서, 현재 COD, TN, TP 모두 등급외의 수질상태를 보이고 있다. J 호소 상류 유역은 축산농가가 다수 위치하고 있으며, 설치된 지 70년이 지난 노후화된 저수지로 고농도의 오염물질 유입뿐만 아니라 호소 바닥의 오염 퇴적물에 의한 내부 부하가 중요한 수질오염원이 되고 있다. 호소의 수질은 현재 COD 10.6~16.5 mg/L, Chl-a $75mg/m^3$ 이상으로 수질오염도가 매우 높으며, 특히 늦봄에서 초가을까지 외기온도 상승 및 저수율 저하와 함께 부영양화 증가, 녹조 대발생 등으로 호 내 물고기 대량 폐사 및 악취발생 등으로 민원이 다수 발생하고 있다. 이러한 현상의 직접적인 원인은 수중의 DO 농도 결핍이며, 따라서 수중의 DO 농도를 일정수준 이상으로 유지시켜 주는 것은 호소 수질관리를 위해 매우 필요하다고 판단된다. 본 연구에서는 공기 중의 산소를 호소 수체에 포기시켜 주는 마이크로버블 발생장치를 J 저수지에 설치하여 수체의 DO 농도 변화 등을 분석하였고, 본 연구결과는 농업용 호소의 수질개선을 위한 기술개발 및 계획수립의 기초자료로 활용하고자 하였다. 마이크로버블 포기장치는 수심이 약 4m 되는 저수지 제방 근처에 100m 간격으로 총 3지점에 설치하였다. 버블 발생기는 기액 2상류 선회형 마이크로 버블 발생장치로 3지점에 각 1set(1set에 3기로 구성)씩 구성하여 저수지 바닥 층에서 상부로 1m 떨어진 지점에 고정식으로 설치하였다. 총 공기흡입량은 380 LPM이며, 사용동력은 12.2kW를 사용하였다. 마이크로 버블 포기장치 설치 후 호 내 DO 농도 변화를 평가하기 위하여 호소 전체에 18개 지점을 선정하여 수심 50cm 간격으로 DO 농도를 측정하였다. 가동 전에는 DO 평균농도가 표층에서는 약 7.7mg/L로 나타났고, 수심에 따라 거의 수직적으로 감소하여 바닥층에서는 약 0.2mg/L로 거의 무산소 상태를 보이고 있었다. 마이크로 버블 가동 2주 후에는 수심 3m까지의 모든 수층에서 DO 농도가 약 6.0mg/L 이상을 보였고, 바닥층에서는 DO 약 3.4mg/의 농도를 나타내었다. 가동 3주 후에도 2주 후와 비슷한 수치를 보이고 있었으나 가동 4주가 지나면서부터는 호소 바닥층(수심 3.5m)에서도 DO 농도가 7.0mg/L 이상의 높은 농도를 유지하는 것으로 조사되었다. 호소 저층에서 호기성 상태의 지속적 유지는 퇴적 오염물질이 수층으로 용출되는 것을 예방할 수 있으므로 마이크로버블을 잘 활용하면 호소의 악취제거 및 수질개선에 많은 도움이 될 것으로 판단된다.

• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.489-495
• /
• 2023

Radiation shielding facilities are constructed in locations where diagnostic radiation generators are installed, with the aim of preventing exposure for patients and radiation workers. The purpose of this study is seek to compare and validate the trend of attenuation thickness of lead, the primary material in these radiation shielding facilities, at different maximum tube voltages by Monte Carlo simulations and measurement. We employed the Monte Carlo N-Particle 6 simulation code. Within this simulation, we set a lead shielding arrangement, where the distance between the source and the lead sheet was set at 100 cm and the field of view was set at 10 × 10 cm². Additionally, we varied the tube voltages to encompass 80, 100, 120, and 140 kVp. We calculated energy spectra for each respective tube voltage and applied them in the simulations. Lead thicknesses corresponding to attenuation rates of 50, 70, 90, and 95% were determined for tube voltages of 80, 100, 120, and 140 kVp. For 80 kVp, the calculated thicknesses for these attenuation rates were 0.03, 0.08, 0.21, and 0.33 mm, respectively. For 100 kVp, the values were 0.05, 0.12, 0.30, and 0.50 mm. Similarly, for 120 kVp, they were 0.06, 0.14, 0.38, and 0.56 mm. Lastly, at 140 kVp, the corresponding thicknesses were 0.08, 0.16, 0.42, and 0.61 mm. Measurements were conducted to validate the calculated lead thicknesses. The radiation generator employed was the GE Healthcare Discovery XR 656, and the dosimeter used was the IBA MagicMax. The experimental results showed that at 80 kVp, the attenuation rates for different thicknesses were 43.56, 70.33, 89.85, and 93.05%, respectively. Similarly, at 100 kVp, the rates were 52.49, 72.26, 86.31, and 92.17%. For 120 kVp, the attenuation rates were 48.26, 71.18, 87.30, and 91.56%. Lastly, at 140 kVp, they were measured 50.45, 68.75, 89.95, and 91.65%. Upon comparing the simulation and experimental results, it was confirmed that the differences between the two values were within an average of approximately 3%. These research findings serve to validate the reliability of Monte Carlo simulations and could be employed as fundamental data for future radiation shielding facility construction.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.552-558
• /
• 2014

This paper suggests how to design a ZigBee-chip-based communication module to remotely measure radiation level. The suggested communication module consists of two control processors for the chip as generally required to configure a ZigBee system, and one chip module to configure a ZigBee RF device. The ZigBee-chip-based communication module for remote radiation measurement consists of a wireless communication controller; sensor and high-voltage generator; charger and power supply circuit; wired communication part; and RF circuit and antenna. The wireless communication controller is to control wireless communication for ZigBee and to measure radiation level remotely. The sensor and high-voltage generator generates 500 V in two consecutive series to amplify and filter pulses of radiation detected by G-M Tube. The charger and power supply circuit part is to charge lithium-ion battery and supply power to one-chip processors. The wired communication part serves as a RS-485/422 interface to enable USB interface and wired remote communication for interfacing with PC and debugging. RF circuit and antenna applies an RLC passive component for chip antenna to configure BALUN and antenna impedance matching circuit, allowing wireless communication. After configuring the ZigBee-chip-based communication module, tests were conducted to measure radiation level remotely: data were successfully transmitted in 10-meter and 100-meter distances, measuring radiation level in a remote condition. The communication module allows an environment where radiation level can be remotely measured in an economically beneficial way as it not only consumes less electricity but also costs less. By securing linearity of a radiation measuring device and by minimizing the device itself, it is possible to set up an environment where radiation can be measured in a reliable manner, and radiation level is monitored real-time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.4
• /
• pp.207-215
• /
• 2014

Password based authentication systems are most widely used for user convenience in web services. However such authentication systems are known to be vulnerable to various attacks such as password guessing attack, dictionary attack and key logging attack. Besides, many of the web systems just provide user authentication in a one-way fashion such that web clients cannot verify the authenticity of the web server to which they set access and give passwords. Therefore, it is too difficult to protect against DNS spoofing, phishing and pharming attacks. To cope with the security threats, web system adopts several enhanced schemes utilizing one time password (OTP) or long and strong passwords including special characters. However there are still practical issues. Users are required to buy OTP devices and strong passwords are less convenient to use. Above all, one-way authentication schemes generate several vulnerabilities. To solve the problems, we propose a multi-channel, multi-factor authentication scheme by utilizing QR-Code. The proposed scheme supports both user and server authentications mutually, thereby protecting against attacks such as phishing and pharming attacks. Also, the proposed scheme makes use of a portable smart device as a OTP generator so that the system is convenient and secure against traditional password attacks.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.243-250
• /
• 2014

In this paper, I devise a balance-swap optimization (BSO) algorithm to solve economic load dispatch with a quadratic fuel cost function. This algorithm firstly sets initial values to $P_i{\leftarrow}P_i^{max}$, (${\Sigma}P_i^{max}$ > $P_d$) and subsequently entails two major processes: a balance process whereby a generator's power i of $_{max}\{F(P_i)-F(P_i-{\alpha})\}$, ${\alpha}=_{min}(P_i-P_i^{min})$ is balanced by $P_i{\leftarrow}P_i-{\alpha}$ until ${\Sigma}P_i=P_d$; and a swap process whereby $_{max}\{F(P_i)-F(P_i-{\beta})\}$ > $_{min}\{F(P_i+{{\beta})-F(P_j)\}$, $i{\neq}j$, ${\beta}$ = 1.0, 0.1, 0.1, 0.01, 0.001 is set at $P_i{\leftarrow}P_i-{\beta}$, $P_j{\leftarrow}P_j+{\beta}$. When applied to 15, 20, and 38-generators benchmark data, this simple algorithm has proven to consistently yield the best possible results. Moreover, this algorithm has dramatically reduced the costs for a centralized operation of 73-generators - a sum of the three benchmark cases - which could otherwise have been impossible for independent operations.