• 한국생산제조학회지
• /
• 제5권1호
• /
• pp.43-50
• /
• 1996

From a manufacturing standpoint it would be desirable to monitor the degradation of drawing die, that is essential for the maintenance of die quality, the evaluation of product integrity and the reducing scrap. Acoustic emission is powerful method in monitoring fine wire drawing process, especially in detecting the die fracture at early stage. Experiments also suggested that acoustic emission sigals contained valuable information regarding the stage of a drawing process such as the surface appearance of products and the condition of lubrication. These informations are AE monitoring techniques a possible tool in monitoring the drawing process operation. In order to approach this, this paper discusses the nature of acoustic emission signal presented which illustrate the effects of wire and die material, lubricants, and drawing speed on the generation and the mean voltage level of acoustic emission signal. From these experimental, results, we understanded controlling factors of acoustic emission generation.

• 신재생에너지
• /
• 제10권2호
• /
• pp.19-28
• /
• 2014

Wind power generation of 5 MW wind turbine was predicted by using wind measurement data from HeMOSU-1 which is at south west coast of Korea. Time histories of turbulent wind was generated from 10-min mean wind speed and then they were used as input to Bladed to estimated electric power. Those estimated powers are used in both polynominal regression and neural network training. They were compared with each other for daily production and yearly production. Effect of mean wind speed and turbulence intensity were quantitatively analyzed and discussed. This technique further can be used to assess lifetime power of wind turbine.

• 한국통신학회논문지
• /
• 제21권10호
• /
• pp.2605-2619
• /
• 1996

In this paper, we evaluated performance of mobile exchange control part. Queueing network model is used for modeling of mobile exchange control part. We developed a call control processing and location registration scenartio which has a message exchange function between processors in mobile exchange control part. A network symbol are used the simulation models that are composed of the initialization module, message generation module, message routing module, message processing module, message generation module, HIPC network processing module, output analysis module. as a result of computer simulation, we obtain the processor utilization, the mean queue length, the mean waiting time of control part based on call processing and location registration capacity. The call processing and location registration capacity is referred by thenumber of call attempts in the mobile exchange and must be satisfied with the quality of service(delay time).

• 대한소아치과학회지
• /
• 제33권3호
• /
• pp.422-428
• /
• 2006

상아질 접착제는 많은 발전을 거듭하여 적용 단계가 단순화되고 짧아져서 어린이에게 사용하기에 더욱 편리해졌다. 본 연구에서는 최근 개발된 7세대 결합제인 $i-bond^{TM}$(Kulzer, Germany)의 미세누출을 기존에 사용되는 다른 결합제와 비교하여 그 효용성을 평가하기 위함이다. 40개의 교정적 목적으로 발거된 건전한 소구치의 협면과 설면에 5급 와동을 형성하고 무작위로 4개의 군으로 나누었다. 1군은 4세대인 Scotchbond $Multi-Purpose^{(R)}$(3M, USA), 2군은 5세대 Clearfil SE Bond(Kuraray, Japan), 3군은 6세대 AQ Bond(Sun medical, Japan), 4군은 7세대 $i-bond^{TM}$(Kulzer, Germany)를 적용하고 복합레진 Z100(3M, USA)으로 충전하였다. 시편을 $5^{\circ}C$와 $55^{\circ}C$에 각 30초간 계류시켜 1,000회 열순환하고 2% methylene blue 용액에 24시간 넣어 염료를 침투시킨 뒤, 저속 diamond cutter($Isomet^{TM}$, Buehler, USA)를 이용하여 주수하에 치아를 협설로 절단하였다. 색소의 침투 정도를 입체현미경을 이용하여 침투깊이를 0에서 3점으로 채점하여 측정한 뒤 미세누출 정도를 비교하였다. 결과적으로 7세대 결합제의 미세누출 평균값이 다른 결합제보다 높게 나왔으며, 특히 4세대 결합제와는 통계적으로 유의한 차이가 있었다.

• 물과 미래
• /
• 제12권2호
• /
• pp.63-69
• /
• 1979

The sequences of monthly streamflows constitute a non-statonary time series. The purely stochastic model has been applied to data generation of non-stationary time series. Tow different mothods--single site and multisite generation--have been used on the hydrologic time series. In this study the synthetic generation method by bivariate analysis, studied by Thomas Fiering, one of multi-site models, has been applied to the historical data on monthly streamflows at two sites in Nakdong River, and also for validity of this model the single site Thomas Fiering model applied. Through statistical analysis it has been shown that the performance of bivariate Thomas Fiering model was better than that of the other. By comparison of mean and standard deviaion between the historical and the generated, and cross correlogram interpretation, it has been known that the model used herein has good performance to simultaneously generate the monthly streamflows at two sites in a river hasin.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.213-223
• /
• 2016

The validity of landfill gas models is an important problem considering that they are frequently used for landfill-site-related policy making and energy recovery planning. In this study, the Monte Carlo method was applied to an landfill gas generation model in order to enhance conformity. Results show that the relative mean deviation between measured data and modeled results (MD) decreased from 19.8% to 11.7% after applying the uncertainty range of Intergovernmental Panel on Climate Change (IPCC) to the methane-generation potential and reaction constants. Additionally, when let reaction constant adjust derived errors from all other modeling components, such as model logic, gauging waste, and measured methane data, MD decreased to 6.6% and the disparity in total methane generation quantity to 2.1%.

• 한국음향학회지
• /
• 제3권1호
• /
• pp.9-15
• /
• 1984

Thermoacoustic oscillation induced by a heater in a tube with air current is studied theoretically. Linearized perturbation equations are derived in dimensionless form under the assumption that the system is one dimensional. The equation to predict the acoustic power generation from a heating surface is derived and calculated by solving differential equations numerically. The effect of the mean velocity of the air current is illustrated. The energy conversion mechanism is shown by pressure-volume diagram like a heat engine.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.411-418
• /
• 2018

This paper introduces a new method of ice load generation in the time domain for the station-keeping performance evaluation of Arctic offshore structures. This method is based on the ice load spectrum and mean ice load. Recently, there has been increasing interest in Arctic offshore technology for the exploration and exploitation of the Arctic region because of the better accessibility to the Arctic ocean provided by the global warming effect. It is essential to consider the ice load during the development of an Arctic offshore structure. In particular, when designing a station-keeping system for an Arctic offshore structure, a consideration of the ice load acting on the vessel in the time domain is essential to ensure its safety and security. Several methods have been developed to consider the ice load in the time domain. However, most of the developed methods are computationally heavy because they consider every ice floe in the sea ice field to calculate the ice load acting on the vessel. In this study, a new approach to generate the ice load in the time domain with computational efficiency was suggested, and its feasibility was examined. The ice load spectrum and mean ice load were acquired from a numerical analysis with GPU-event mechanics (GEM) software, and the ice load with the varying heading of a vessel was reconstructed to show the feasibility of the proposed method.

• 한국농공학회논문집
• /
• 제52권6호
• /
• pp.1-7
• /
• 2010

This study was carried out to investigate the effect of hydro power factors (e.g., irrigation area, watershed area, active storage, gross head) on annual generation capacity and operation ratio for agricultural reservoirs in Chungbuk Province with active storage of over 1 million $m^3$. The annual generation capacity and operation ratio were estimated using HOMWRS (Hydrological Operation Model for Water Resources System) from last 10-year daily hydrological data. The correlation coefficients between annual generation capacity and the hydro power factors except gross head were high (over 0.87), but the correlation coefficients between operational rate and the factors were low (below 0.28). The optimum multiple regression equations of the annual generation capacity were expressed as the functions of watershed area, active storage, and gross head. Also, the simple regression equation of annual generation capacity was expressed as a function of watershed area. The average relative root-mean-square-error (RRMSE) between observed and estimated values by the optimum multiple regression equations was smaller than that by the simple regression equation, suggesting that the former has more accuracy than the latter.

• 에너지공학
• /
• 제24권1호
• /
• pp.164-171
• /
• 2015

석탄화력 발전은 기저발전원으로서 전력을 안정적으로 공급하는 역할을 해왔으나 전력을 생산하여 공급하는 과정에서 다양한 사회적 비용을 발생시킨다. 기후변화에 대응하기 위하여 석탄화력 발전의 비중을 낮추고 저탄소 발전원의 비중을 늘릴 필요가 있다. 이에 본 연구는 대표적인 재생에너지인 수력발전으로 석탄화력 발전의 전력생산을 대체하는 것에 대한 국민들의 지불의사액을 추정해 보고자 한다. 이를 위하여 비시장 재화를 대표하는 기법인 조건부 가치측정법을 적용하였으며, 영의 지불의사액(willingness to pay, WTP)을 명시적으로 다루기 위하여 스파이크 모형을 적용하였다. 분석결과, 석탄화력 발전으로 공급받는 전기를 수력 발전으로 대체하기 위한 국민들의 추가적 WTP 평균값은 1kWh당 약 54원으로 추정되었다. 이러한 연구결과는 발전원의 환경적 가치를 활용하는 연구 및 발전원 구성에 있어 중요한 참고자료로 활용될 수 있다.