• Korean journal of applied entomology
• /
• v.25 no.1 s.66
• /
• pp.1-9
• /
• 1986

Periodical samplings were made in the fields, located Hwasong-Gun, Banwal-Myon, Doondai-Ri, for two years to study the major factors responsible to the population of the overwintered pine needle gall midge, Thecodiplosis japonensis Uchida et Inouye. The population densities of the overwintered larvae reduced greatly at the time of pupation and the changing patterns seemed to be influenced by environmental conditions. The estimated 50% pupation day was about two weeks earlier for the 1980 generation compared with the 1979 generation, and much higher average and the daily maximum temperatures in 1981 affected on the development of the larvae. The relative emergence rates were 14.1% for 1979 and 14.9% for 1980 generation. The relative emergence rates(Y) were affected by the moisture contents of soil ($X_1$) and its variance $(X_2),\;Y=-68.41+4.3206X_1-0.6887X_2$. The relative emergence rates seemed to be decreased with the increased variance of the moisture contents of soil. Percents of needle gall were 49.63% for 1980 and 86.87% for 1981 generation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.753-760
• /
• 2008

The present study is concerned with aerodynamic characteristics and reference trajectory generation of Hope-X in Approach/Landing phase. To create reference trajectory generation in A/L phase, detailed informations on lift and drag coefficients of Hope-X must be provided. To obtain these informations, aerodynamic characteristics of Hope-X are analyzed using the commercial CFD code, Fluent. The A/L phase is conceptually divided into three sub-phases: the Steepglide Slope phase for stability of vehicle, the Flare Maneuver phase for safety landing, the Circular Flare for smooth connecting with these both phases. The reference trajectory is obtained by determination of flight-path angle through geometrical formulas with consideration of aerodynamic coefficient and dynamic characteristic.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.80-85
• /
• 2009

An experimental study of energy absorption and x-ray emission from ultrashort laser pulse irradiation of in-situ produced solid clusters has been performed. Silver clusters produced by a 30 mJ, 300 ps laser pulse were irradiated up to an intensity of $3{\times}10^{17}\;W/cm^2$ by a 70 mJ, 45 fs compressed laser pulse from the same Ti:sapphire laser. Absorption of the laser light exceeding 70% was observed, resulting in an x-ray yield (>1 keV) of ${\sim}60{\mu}J$ pulse. This may constitute a much simpler means of intense x-ray generation using ultrashort laser pulses as compared to the irradiation of structured / pre-deposited cluster targets, and it offers higher x-ray conversion efficiency than that from gas clusters and planar solid targets.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.138-139
• /
• 2006

Metal organic chemical vapor deposition has been investigated for growth of $Sb_{2-x}Bi_xTe_3$ films on (001) GaAs substrates using diisopropyltelluride, triethylantimony and trimethylbismuth as metal organic sources. The thermoelectric properties were measured at room temperature and include Seebeck coefficient, electrical conductivity and Hall effect. In-plane carrier concentration and electrical Hall mobility were highly dependent on precursor's composition ratio and deposition temperature. The thermoelectric Power factor($={\alpha}^2{\sigma}$) was calculated from theses properties. The best Power factor was $2.6\;{\times}\;10^{-3}W/mK^2$, given by grown $Sb_{1.6}Bi_{0.4}Te_3$ at $450^{\circ}C$. These materials could potentially be incorporated into advanced thermoelectric unicouples for a variety of power generation applications.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.15 no.4
• /
• pp.51-61
• /
• 2019

In this paper, we have implemented soil simulation using fluid simulation technology. A widely used NVIDIA FleX was used to represent the soil generated by excavation work. FleX is a particle-based physics simulation library that combines SPH (Smoothed-particle hydrodynamics) and Position Based Dynamics techniques. However, since the soil has not only fluid properties but also non-fluid properties, it is difficult to simulate with the functions provided by conventional FleX. In this study, we added a technique to simulate non-fluid behavior using existing Flex. This can lead to effective results improvement at low cost.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.364-365
• /
• 2011

This study develops a new system for generation system simulation and operational planning (namely, KPWR-X) including GMS(Generator Maintenance Scheduling), UC(Unit Commitment), and LF(Load Forecasting) for new power system environment in recent. The KPWR-X provides operator and planner to help the generation system more safely and economically. GUI developed in this study makes operator feel in convenient to control whole power system. In future, it is expected that generation company, ISO, and fuel procurement, etc. may use an instructional tool developer's suggestion for application. It will be also applicable to establish the operational strategies for generation control, fuel procurement and power system risk management.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.34-37
• /
• 2017

In recent emerging industry, Display field becomes bigger and bigger, and also semiconductor technology becomes high density integration. In Flat Panel Display, there is an issue that electrostatic phenomenon results in fine dust adsorption as electrostatic capacity increases due to bigger size. Destruction of high integrated circuit and pattern deterioration occur in semiconductor and this causes the problem of weakening of thermal resistance. In order to solve this sort of electrostatic failure in this process, Soft X-ray ionizer is mainly used. Soft X-ray Ionizer does not only generate electrical noise and minute particle but also is efficient to remove electrostatic as it has a wide range of ionization. X-ray Generating efficiency has an effect on soft X-ray Ionizer affects neutralizing performance. There exist variable factors such as type of anode, thickness, tube voltage etc., and it takes a lot of time and financial resource to find optimal performance by manufacturing with actual X-ray tube source. MCNPX (Monte Carlo N-Particle Extended) is used for simulation to solve this kind of problem, and optimum efficiency of X-ray generation is anticipated. In this study, X-ray generation efficiency was measured according to target material thickness using MCNPX under the conditions that tube voltage is 5 keV, 10 keV, 15 keV and the target Material is Tungsten(W), Gold(Au), Silver(Ag). At the result, Gold(Au) shows optimum efficiency. In Tube voltage 5 keV, optimal target thickness is $0.05{\mu}m$ and Largest energy of Light flux appears $2.22{\times}10^8$ x-ray flux. In Tube voltage 10 keV, optimal target Thickness is $0.18{\mu}m$ and Largest energy of Light flux appears $1.97{\times}10^9$ x-ray flux. In Tube voltage 15 keV, optimal target Thickness is $0.29{\mu}m$ and Largest energy of Light flux appears $4.59{\times}10^9$ x-ray flux.

• Information Systems Review
• /
• v.23 no.3
• /
• pp.201-223
• /
• 2021

Smart home is an advanced Internet of Things (IoT) service that enhances the convenience of human daily life and improves the quality of life at home. Recently, with the emergence of smart home products and services to which artificial intelligence (AI) technology is applied, interest in smart home is increasing. To gain a competitive edge in the smart home market, companies are providing "personalized service" to users, which is a key service that can promote smart home use. This study investigates the factors affecting the value awareness of personalized service and intention to use smart home. This research focuses on four-dimensional motivated innovativeness (cognitive, functional, hedonic, and social innovativeness) and privacy risk awareness as key factors that influence the value awareness of personalized service of smart home. In particular, this study conducts a comparative analysis between the generation MZ (young people in late teens to 30s), who are showing socially differentiated characteristics, and the generation X and baby boomers in 40s to 50s or older. Based on the analysis results, this study derives the distinctive characteristics of generation MZ that are different from the older generation, and provides academic and practical implications for expanding the use of smart home services.

• The Journal of the Petrological Society of Korea
• /
• v.10 no.3
• /
• pp.212-221
• /
• 2001

This paper introduces the characteristics and generation of the synchrotron radiation (SR). SR has the very high spectral brilliance, broad spectral range, X-ray wavelength tunability, high degree of polarization and collimation, and pulsed time structure. Also describes the technologies to apply in the fields of geology and environmental sciences. These include X-ray tomography, XRF, EXAFS, XANES, DAC, IVP experiments. Further, nuclear power generation and nuclear waste disposal methods are mentioned relating to energy. Using these, analyses of the chemistry, crystal structure and chemical combining states of minerals and rocks can be carried out. Applications in the fields of the economic geology, paleontology and environmental sciences are open too. Informations of the Earth interior materials' behavior under high pressure-temperature can be acquired.

• Korean Journal of Metals and Materials
• /
• v.46 no.5
• /
• pp.276-282
• /
• 2008

Material degradation of Cr steels in boiler tubes was accompanied by the microstructural changes including carbide behavior and crack formation. The microstructural change and the mechanical behavior of hardness and creep properties in accelerated heat-treatments were studied in order to identify the material degradation of the X20 Cr steel. The degradation behavior was occurred in the hardness increasing followed by decreasing due to carbide dissolution and precipitation.