• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.639-639
• /
• 2013

In this research we report the significant contribution of the as-spun multi-walled carbon nanotube (MWCNT) on the x-ray images formation using a low tube voltage x-ray source. The MWCNT, which was used for the fabrication of the spun CNT, was grown using a microwave plasma-enhanced chemical vapor deposition machine. Electrical-optics simulation software was utilized to determine the electron field emission trajectory of the triode-structure-as-spun CNT-based x-ray source. It was shown that a significant amount of converging electrons hit the target anode producing a clear x-ray image. These x-ray images where produced at a small amount of anode current of 0.67 mA at a tube voltage of 5 kV with the gate voltage of 0 V. Also, comparisons of the radiographs at various exposure times of the sample where analyzed with and without an x-ray dose filter. Results showed that spatially-resolved images were formed using the as-spun CNT at a low tube voltage with a $54-{\mu}m$ Al x-ray filter. This study can be used for low-voltage medical applications.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.31-38
• /
• 2000

Seven flue-cured tobacco(Nicotiana tabacum) varieties and their 21 progenies in Fl and F2 generation, half diallel crosses(no reciprocal), were tested for the degree of heterosis and combining abilities in sucker producing character according to topping and suckering treatment. Significant difference in number and weight of sucker was observed among seven cultivars. The values of general combining ability(GCA) were greater than those of specific combining ability(SCA) in weight and number of sucker in F$_1$ generation. In topping and suckering plot, Cocker 86, McNair 944, and Va 115 revealed the significant negative GCA effects for number and weight of sucker, but By 104 and Speight G-28 did positive GCA. Without topping and suckering, GCA effects for sucker weight in Cocker 139 and Cocker 86 were negative and those for sucker number in Va. 115 were also negative. Negative SCA values in sucker weight could be observed in F$_1$ generation of Cocker 86 X BY 104 and Speiht G-28 X Cocker 86, in F$_2$ of Hicks $\times$ Speight G-28 and McNair 944 $\times$ BY 104 in topping and suckering plot. SCA in F$_1$ of McNair 944 X Cocker 86 and Speight G-28 X Cocker 139 was negative without topping and suckering. The value of heterosis in sucker producing character of F$_1$ hybrids was positive

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.4
• /
• pp.285-291
• /
• 2011

A pose estimation process from medical images is calculating locations and orientations of objects obtained from Computed Tomography (CT) volume data utilizing X-ray images from two directions. In this process, digitally reconstructed radiograph (DRR) images of spatially transformed objects are generated and compared to X-ray images repeatedly until reasonable transformation matrices of the objects are found. The DRR generation and image comparison take majority of the total time for this pose estimation. In this paper, a fast DRR generation technique based on GPU parallel computing is introduced. A volume ray-casting algorithm is explained with brief vector operations and a parallelization technique of the algorithm using Compute Unified Device Architecture (CUDA) is discussed. This paper also presents the implementation results and time measurements comparing to those from pure-CPU implementation and open source toolkit.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1779-1792
• /
• 2009

Now, the goal of the third generation KTX project is to create a new species of high speed train in order to open a new era of high speed railway system in history by authentic Korean technology and innovative design. Now the third generation KTX, must go beyond the original stagnant paradigm and be positioned as an emotional resource which is creating a shift in the public's perspective of transportation and expanding the idea that transportation intersects the two distinct realms of culture and environment as well. In addition, the overall design should reflect the Korean culture and characteristics, simple yet resonant, both the interior space and the exterior fuselage should portray the dynamic heritage of Korea such as the powerful yet subdued energy of Jung Joong Dong. In short, through the symbolic key words in Korean, Dong(Dynamics), Mek(Pulse), Ryu(Flow), Gam(Sensibility), the third generation KTX design project aims to create an new identity of Korean high speed railway which can stand globally.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.295-308
• /
• 2009

Now, the goal of the third generation KTX project is to create a new species of high speed train in order to open a new era of high speed railway system in history by authentic Korean technology and innovative design. Now the third generation KTX, must go beyond the original stagnant paradigm and be positioned as an emotional resource which is creating a shift in the public's perspective of transportation and expanding the idea that transportation intersects the two distinct realms of culture and environment as well. In addition, the overall design should reflect the Korean culture and characteristics, simple yet resonant, both the interior space and the exterior fuselage should portray the dynamic heritage of Korea such as the powerful yet subdued energy of Jung Joong Dong. In short, through the symbolic in Korean, Dong(Dynamics), Mek(Pulse), Ryu(Flow), Gam(Sensibility), the third generation KTX design project aims to create an new identity of Korean high speed railway which can stand globally.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.80-80
• /
• 1991

1 GW급 옥소레이저를 직경과 깊이가 각각 0.5 mm에서 1.5 mm 사이에 있는 12 종류의 몰리브덴(Mo, Z=42) 홈 표적에 집속시켜서 발생하는 X-선의 세기를 측정하였다. 이때의 X-선 세기를 평면 표적의 경우와 비교하여 홈 표적에서의 효과를 조사하였다. X-선의 세기는 20 A 이하의 단파장을 통과시키는 필터뒤에 X-선 두어 측정하였으며 홈 표적에서의 X-선 세기는 평면 표적의 약 2 배가 됨을 보았다. 이 결과는 홈 표적에서의 플라즈마 감금효과에 의해 정성적으로ㅅ 성명 되었다.

• Journal of the Korean Society of Safety
• /
• v.33 no.2
• /
• pp.28-31
• /
• 2018

In display and semi-conductor manufacturing process, there are numerous unstable factors such as particle concentration, minimal vibration, changes in magnetic field, or electrostatic that becomes an issue to be managed and controlled. In the recent, X-ray ionization is widely used that is neutralized by separating air or gas molecules in the area where the static must be resolved. The mono-type of X-ray ionizer was not capable to be used in $8^{th}$ generation panels manufacturing plant due to its insufficient ionizing coverage since the panel itself is approximately in $2m{\times}3m$. To resolve the current problem, the development of new type called, "Multi-type X-ray ionizer" has resulted in covering enough ionizing space in $8^{th}$ generation panels industry. Comparing mono and multi types with MCNPX code simulation, the multi one indicates more X-ray flux, efficiency, and ionization performance in comparison with either a mono-type or multi-type in array format. In addition, the ionizing efficiency of overlapping area with multi-type showed 30% higher effectiveness rate as to the ordinary mono-type.

• Ceramist
• /
• v.22 no.4
• /
• pp.402-416
• /
• 2019

The development of next-generation secondary batteries, including lithium-ion batteries (LIB), requires performance enhancements such as high energy/high power density, low cost, long life, and excellent safety. The discovery of new materials with such requirements is a challenging and time-consuming process with great difficulty. To pursue this challenging endeavor, it is pivotal to understand the structure and interface of electrode materials in a multiscale level at the atomic, molecular, macro-scale during charging / discharging. In this regard, various advanced material characterization tools, including the first-principle calculation, high-resolution electron microscopy, and synchrotron-based X-ray techniques, have been actively employed to understand the charge storage- and degradation-mechanisms of various electrode materials. In this article, we introduce and review recent advances in in-situ synchrotron-based x-ray techniques to study electrode materials for LIBs during thermal degradation and charging/discharging. We show that the fundamental understanding of the structure and interface of the battery materials gained through these advanced in-situ investigations provides valuable insight into designing next-generation electrode materials with significantly improved performance in terms of high energy/high power density, low cost, long life, and excellent safety.

• Journal of Plant Biology
• /
• v.5 no.1
• /
• pp.1-6
• /
• 1962

1) Germination rate was rather irregular than decreasing as increasing dose of radiation and there were no differences between Kyong-Sam and Chuong-Bang of Chinese cabbage. 2) In R1 generation, abnormal leaves from seedling of irradiated seeds were observed. These were more apparent in X-ray irradiation than in thermal neutron. 3) Seedling height was inhibited with increasing dose of X-ray and thermal neutrons. Growth inhibition was more remarkable in X-ray than in thermal neutron. Kyong-Sam demonstrated more sensitivity than Chyong-Bang in both X-ray and thermal neutron. 4) Seedling height produced from seeds subjected to thermal neutrons showed small variation around its mean value, while in X-irradiation there was a greater deviaton from the mean value. 5) Fertility was decreased as increasing with dose, while the frequency of abortive pollen was increased. There were variability of the fertility and frequency of abortive pollen among plants or branches of a plant. 6) The mutants were obtained more in thermal neutron irradiation than in X-ray. The types of mutations obtained in Chinese radish of R2 generation were abnormal leaf, densely glowing leaf, degeneration in growing point and dwarf. The maximum frequency of phenotypic mutations was abnormal leaf mutation.

• Proceedings of the ESK Conference
• /
• 1996.04a
• /
• pp.276-289
• /
• 1996

What kind of the mini-component the X-generation wanted\ulcorner It is not easy to find a mini-component which everbody can satisfy with a design and functions. By pre-test of the survey the most wanted things in the mini-component was extracted. By the post-test of the survey the newly design with a price of 500, 000 won. In this paper we try to suggest a mini-component whic X-generation can satisfy with a design and functions. Therefore, this new designed mini-component can give a visual happiness and enjoyment of the sound.