• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.5
• /
• pp.161-168
• /
• 2019

The use of various digital tools makes freeform modeling possible. At the same time, with the development of structural and construction technologies, Free-Form Architecture are beginning to be implemented realized, as the desired data extraction such as the size and coordinate points of the members is possible. Currently, in many cities around the world, Irregular-Shaped High-rise Buildings, which express the dynamic symbolism, are recognized for their landmark values. In order to realize the Irregular-Shaped High-rise Buildings, it is necessary to understand various fields such as the characteristics of digital tools, digital technique logic, design process, and construction method. In particular, it is important to plan Irregular-Shaped High-rise Buildings so that the various types of efficiency can be reviewed together, while generating understanding and formations from the initial design stage. Therefore, this study uses conceptual and parametric design tools related to form generation in digital architecture to analyze the details, methods, and characteristics of the Irregular-Shaped High-rise Buildings form generation process. In this paper, the parametric design tool is applied to study the various types of design and the process characteristics that can be considered in the initial design stage of the unstructured skyscraper.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.1
• /
• pp.237-264
• /
• 2009

Many Korean companies wanted to improve technological competitiveness and business performance radically through technology leadership initiatives. In-depth case studies about successful Korean technological innovation in the technology generation stage have potential to minimize Korea and developing country firms' trial and error when they are pursuing new technological innovation in the technology generation stage. There are few studies about developing country firms' technological innovations in the technology generation stage and especially process innovation studies are far less performed compared to product innovation studies. This is an exploratory study of POSCO's FINEX process technology innovation in the technology generation stage. These are my findings from this study. Firstly, leadership innovation in the technology generation stage is not a continuous development of catch-up innovation in the technology internalization stage and only top managements can initiate highly risky leadership innovation. Secondly, developing country firms which lacked in technological capability overcomes difficulties in the early stage through complementary technological collaboration with R&D first-movers. Thirdly, this company become a technology leader in spite of late entry in technology development race with developed country firms through rapid scale-ups.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.128-136
• /
• 1998

A mathematical model for investigating the form generation mechanism in the centerless infeed grinding process is described. For 3-D modeling of form generation, contact points are assumed to be on least squares contact lines at the grinding wheel, regulating wheel, and work-rest blade. Using force and deflection analysis, the validity of this assumption is shown. Based on the 2-D simulation model developed in the previous work and the least squares contact line assumption, a 3-D model is presented. To validate this model, simulation results were compared with the experimental works. The experiments and computer simulations were carried out using three types of cylindrical workpiece shapes with varying flat length. The experimental results agree well with the simulation. It can be seen that the effect of flat end propagated to the opposite end through workpiece reorientation.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.1
• /
• pp.87-99
• /
• 2004

In this paper, we have developed a technology-service relationship model which describes the diffusion process of a group of services and relevant technologies, and have applied the developed model to the prediction of the number of subscribers to the next generation mobile service. The technology-service relationship model developed in this paper incorporates the developing process of relevant technologies, a supply-side factor, into the diffusion process of specific services, while many diffusion models and multi-generation diffusion models in previous researches are mainly reflect the demand-side factors. So, the proposed model could effectively applied to the telecommunication services where the developing of the relevant technologies are very essential to the service Penetration. In our application, the Proposed model provides a competitive substitution between the next generation mobile service and the traditional mobile service.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.344-349
• /
• 2005

This paper presents a geometrical error analysis of wheel curve generation method for micro aspheric surface machining using parallel grinding method. In aspheric grinding, wheel wear in process is crucial parameter for profile error of the ground surface. To decrease wheel weal parallel grinding method is adopted. Wheel and work piece (Tungsten carbide) contact point changes during machining process. In truing process of the wheel radius is determined by the angle and distance between wheel and truer. Wheel radius error is predominantly affected by vertical deviation between the wheel rotation center and the truer center Simulation for vertical error and wheel radius error shows same tendency that expected by geometrical analysis. Experimental results show that the analysis of curve generation method matches with simulations and wheel radius errors.

• The Journal of Information Systems
• /
• v.23 no.2
• /
• pp.91-107
• /
• 2014

In computer-mediated idea generation where contributions can be anonymous, the ability to accurately monitor performances is limited, inducing social loafing. Prior research has suggested that social loafing is likely an important factor in reducing task performance. Researchers have theorized that loafing could be minimized if clear performance feedback is provided. Our prior study evidences a substantial performance gain by the provision of real time performance information about who is contributing and who is not. However, our prior study incorporated the quantity feedback only to create a larger pool of ideas based on the long-standing assumption (i.e., quantity breeds quality), not considering the quality feedback. As a result, taking advantage of anonymity in the form of pseudonymity, individuals in almost all groups exhibited a tendency of self-presentation by capitalizing on ideas of which quality was low and even frivolous (i.e., junk comments) toward the later stages of the session. Thus, we have learned that the quantity performance feedback alone does not have enough restrictiveness to consistently control the performance behavior throughout the session. Since a process chart allows participants to monitor process variation by comparing new performance data to past performance data, we incorporated real-time visual process performance feedback to reveal performance histories by connecting the sequence of idea quality scores in a time-series format. Using this environment, a laboratory experiment was conducted with five-member groups that examined the influence of both identifiability (i.e., anonymity versus pseudonymity) and process performance feedback (i.e., yes or no) in a $2{\times}2$ factorial design. The result showed that groups in the process performance feedback treatment outperformed groups in the no feedback treatment. Additionally, process performance feedback and identifiability interacted such that groups in the process performance feedback/pseudonymity treatment had the highest performance. The implications of these findings for future research, as well as the implications for the design of group idea generation procedures are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.780-785
• /
• 1987

The measuring point data of clay model are widely used to design parts whose external features are important design factor such as automobiles and general die products. This paper presents a method for improving the process to generate smooth surfaces from the measuring point data using turnkey CAD/CAM system. The process of smooth-surface generation involves several steps: styline finding, curve fairing, surface generation and filleting. The process is improved by automatic curve fairing, local correction of surface and multi-boundary surface treatment. An automobile bumper and a telephone receiver are measured and modeled to test the new method. Significant time saving is resulted by changing interactive mode to automatic mode and eliminating inefficient loop of surface generation process.

• Journal of information and communication convergence engineering
• /
• v.13 no.2
• /
• pp.97-104
• /
• 2015

In this paper, we propose a data envelopment analysis (DEA) and analytic hierarchy process (AHP) integrated model to improve the selection process in the acquisition of a weapon system which is the key component to the success of the project. In particular, we applied DEA in the first stage to choose a frontier group among the candidates in the selection process of the next-generation fighter system (the 3rd FX) in Korea. Then, by using the Delphi technique, we surveyed military experts and applied AHP to determine the best choice among the candidates. The results of the study match the actual decision made by the Korean government in the weapon system acquisition. The results of the proposed DEA-AHP integrated method in the selection of the next-generation fighter systems in Korea demonstrate the usefulness of the method. In this paper, we also discuss the future implications of the proposed model.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.168-173
• /
• 1997

A process planning system that generates alternative process plans offers multiple process plans for a part, thereby provides the flexibility to cope with the changes in shop floor status. In this paper, we intro- duce the concept of process net as a model for the generation of alternative process plans. We also show the usefulness of process net model in generating alternative process plans by implementing the developed sys- tem to construct process net, and devising an algorithm to generate alternative process plans for rotational parts.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.17-23
• /
• 1997

In the two-dimensional Finite Element Method for forming simulation, mesh generation and remeshing process are very significant. In this paper, using the modified splitting mesh generation algorithm, we can overcome the limitation of existing techniques and acquire mesh, which has optimal mesh density. A modified splitting algorithm for automatically generating quadrilateral mesh within a complex domain is described. Unnecessary meshing process for density representation is removed. Especially, during the mesh generation with high gradient density like as shear band representation, the modified mesh density scheme, which will generate quadrilateral mesh with the minimized error, which takes effect on FEM solver, is introduced.