• 제목/요약/키워드: Generating Test Case

검색결과 77건 처리시간 0.026초

타이타늄 상악 주연결장치에 디자인에 따른 주조성 및 견고성 비교 (COMPARISON OF RIGIDITY AND CASTABILITY IN DIFFERENT DESIGNS OF MAXILLARY MAJOR TITANIUM FRAMEWORK)

  • 이영재;방몽숙;양홍서;박상원;박하옥;임현필
    • 대한치과보철학회지
    • /
    • 제45권4호
    • /
    • pp.431-443
    • /
    • 2007
  • Statement of problem: Injuries along with discomfort may result on the oral mucosa when non-rigid material is used as the major connector in construction of RPD, since nonrigid major connectors transmit unstable forces throughout the appliance. Titanium which recently draws attention as a substitute of Co-Cr had a difficulty in fabricating due to high melting temperature but the development of casting technique makes it possible to apply to the clinical case. Purpose: The purpose of this study was to investigate the rigidity and the castability of titanium upper major connector by design and make a comparison with Co-Cr major connectors which are widely used in clinical cases now. Material and methods: Casting was done using CP-Ti(Grage 2) (Kobe still Co., Japan) for the experimental groups, and 4 various designs namely palatal strap, U-shaped bar, A-P strap, and complete palatal plate were casted and 5 of each designs were included in each group. For the experimental group, Universal testing machine (Model 4502; Instron, Canton, Mass) was used to apply vertical torsional force vertically to the horizontal plane of major connector. In the second experiment, Vertical compressive force was applied to the horizontal plane of major connector. As a comparative group, Co-Cr major connector was equally manufactured and underwent the same experimental procedures Strain rate was measured after constant loading for one minute duration, and statistical analysis was done with SPSS ver.10.0 for WIN(SPSS. Inc. USA). From the one-way ANOVA and variance analysis (P=0.05), Scheffe's multiple comparison test implemented. Results: 1. Least amount of strain was observed with complete palatal plate followed by A-P bar, palatal bar, and the U-shaped bar having most amount of strain. 2. In all designs of titanium major connector, less strain rate was observed under compressive loading than under torsional loading showing more resistance to lateral force. 3. For titanium major connector, less strain rate was observed when the force is applied to the first premolar area rather than to the second molar area indicating more strength with shorter length of lever. 4. In Comparison of Co-Cr major connector with titanium major connector, palatal strap and U-shaped bar designs showed higher strength under torsional force that is statically significant, and under compressive force, no significant difference was observed expert for U-shaped bar. 5. In titanium major connector, complete palatal plate showed lowest success rate in casting when compared with the Co-Cr major connector. Conclusion: Above results prove that when using titanium for major connector, only with designs capable of generating rigidity can the major connector have almost equal amount of rigidity as Co-Cr major connector and show lower success rate in casting when compared with the Co-Cr major connector.

Recurrent Neural Network Modeling of Etch Tool Data: a Preliminary for Fault Inference via Bayesian Networks

  • Nawaz, Javeria;Arshad, Muhammad Zeeshan;Park, Jin-Su;Shin, Sung-Won;Hong, Sang-Jeen
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.239-240
    • /
    • 2012
  • With advancements in semiconductor device technologies, manufacturing processes are getting more complex and it became more difficult to maintain tighter process control. As the number of processing step increased for fabricating complex chip structure, potential fault inducing factors are prevail and their allowable margins are continuously reduced. Therefore, one of the key to success in semiconductor manufacturing is highly accurate and fast fault detection and classification at each stage to reduce any undesired variation and identify the cause of the fault. Sensors in the equipment are used to monitor the state of the process. The idea is that whenever there is a fault in the process, it appears as some variation in the output from any of the sensors monitoring the process. These sensors may refer to information about pressure, RF power or gas flow and etc. in the equipment. By relating the data from these sensors to the process condition, any abnormality in the process can be identified, but it still holds some degree of certainty. Our hypothesis in this research is to capture the features of equipment condition data from healthy process library. We can use the health data as a reference for upcoming processes and this is made possible by mathematically modeling of the acquired data. In this work we demonstrate the use of recurrent neural network (RNN) has been used. RNN is a dynamic neural network that makes the output as a function of previous inputs. In our case we have etch equipment tool set data, consisting of 22 parameters and 9 runs. This data was first synchronized using the Dynamic Time Warping (DTW) algorithm. The synchronized data from the sensors in the form of time series is then provided to RNN which trains and restructures itself according to the input and then predicts a value, one step ahead in time, which depends on the past values of data. Eight runs of process data were used to train the network, while in order to check the performance of the network, one run was used as a test input. Next, a mean squared error based probability generating function was used to assign probability of fault in each parameter by comparing the predicted and actual values of the data. In the future we will make use of the Bayesian Networks to classify the detected faults. Bayesian Networks use directed acyclic graphs that relate different parameters through their conditional dependencies in order to find inference among them. The relationships between parameters from the data will be used to generate the structure of Bayesian Network and then posterior probability of different faults will be calculated using inference algorithms.

  • PDF

Experimental and analytical study of squat walls with alternative detailing

  • Leonardo M. Massone;Cristhofer N. Letelier;Cristobal F. Soto;Felipe A. Yanez;Fabian R. Rojas
    • Computers and Concrete
    • /
    • 제33권5호
    • /
    • pp.497-507
    • /
    • 2024
  • In squat reinforced concrete walls, the displacement capacity for lateral deformation is low and the ability to resist the axial load can quickly be lost, generating collapse. This work consists of testing two squat reinforced concrete walls. One of the specimens is built with conventional detailing of reinforced concrete walls, while the second specimen is built applying an alternative design, including stirrups along the diagonal of the wall to improve its ductility. This solution differs from the detailing of beams or coupling elements that suggest building elements equivalent to columns located diagonally in the element. The dimensions of both specimens correspond to a wall with a low aspect ratio (1:1), where the height and length of the specimen are 1.4 m, with a thickness of 120 mm. The alternative wall included stirrups placed diagonally covering approximately 25% of the diagonal strut of the wall with alternative detailing. The walls were tested under a constant axial load of 0.1f'cAg and a cyclic lateral displacement was applied in the upper part of the wall. The results indicate that the lateral strength is almost identical between both specimens. On the other hand, the lateral displacement capacity increased by 25% with the alternative detailing, but it was also able to maintain the 3 complete hysteretic cycles up to a drift of 2.5%, reaching longitudinal reinforcement fracture, while the base specimen only reached the first cycle of 2% with rapid degradation due to failure of the diagonal compression strut. The alternative design also allows 46% more energy dissipation than the conventional design. A model was used to capture the global response, correctly representing the observed behavior. A parametric study with the model, varying the reinforcement amount and aspect ratio, was performed, indicating that the effectiveness of the alternative detailing can double de drift capacity for the case with a low aspect ratio (1.1) and a large longitudinal steel amount (1% in the web, 5% in the boundary), which decreases with lower amounts of longitudinal reinforcement and with the increment of aspect ratio, indicating that the alternative detailing approach is reasonable for walls with an aspect ratio up to 2, especially if the amount of longitudinal reinforcement is high.

Cumin(Cuminum cymium L.) seed로부터 정제한 $2-hydroxyethyl-{\beta}-undecenate$의 항치주염 효과의 효소학적 평가 (Enzymatic Assessment of $2-Hydroxyethyl-{\beta}-undecenate$ Purified from Cumin (Cuminum cymium L.) Seed for Anti-periodontitis)

  • 류일환;강은주;이갑상;박정순
    • 한국식품과학회지
    • /
    • 제39권6호
    • /
    • pp.669-675
    • /
    • 2007
  • 본 연구자들은 Cumin(Cuminum cymium L.) seed로부터 정제한 $2-hydroxyethyl-{\beta}-undecenate$의 항치주염 활성을 사람의 백혈구를 이용하여 염증 매개물질 $LTB_4$ 및 PGs의 생성 효소인 5-lipoxygenase와 cyclooxygenase, 및 조직파괴 효소인 collagenase와 elastase의 저해 효과를 규명하여 다음과 같은 결론을 얻었다. HPS의 항치주염 활성을 사람의 백혈구를 이용하여 염증 매개물질 $LTB_4$ 및 PGs의 생성 효소인 5-lipoxygenase와 cyclooxygenase 및 조직파괴효소인 collagenase와 elastase의 저해효과를 규명한 결과, HPS은 $5\;{\times}\;10^{-2}\;M$ 첨가 시 97%의 PMNL로부터 $LTB_4$ 생합성이 저해되었으며 이때 $IC_{50}$ 값은 $2\;{\times}\;10^{-4}\;M$ 이었다. 균질화된 사람의 PMNL 5-lipoxygenase 및 시판 정제 5-lipoxygenase 활성에 대한 HPS의 저해 효과는 $5\;{\times}\;10^{-2}\;M$첨가 시 92%의 효소 활성이 저해되었다. 또한 효소 활성에 대한 $IC_{50}$ 값은 $2.5\;{\times}\;10^{-4}\;M$이었으며, 정제 5-lipoxygenase에 대한 $IC_{50}$ 값은 $2.3\;{\times}\;10^{-4}\;M$이었다. 또한 백혈구 COX 활성에 대한 $IC_{50}$ 값은 $5.1\;{\times}\;10^{-4}\;M$이었고, 정제 COX에 대한 $IC_{50}$ 값은 $2.3\;{\times}\;10^{-4}\;M$이었으며, 백혈구 collagenase 활성에 대한 $IC_{50}$ 값은 $2\;{\times}\;10^{-3}\;M$이었고 정제 collagenase에 대한 $IC_{50}$ 값은 $5\;{\times}\;10^{-2}\;M$이었다. 백혈구 elastase의 경우 $5\;{\times}\;10^{-2}\;M$ 첨가 시 66%의 활성이 저해된 반면 정제 elastase의 경우 $5\;{\times}\;10^{-2}\;M$ 첨가 시 25%의 효소 활성이 저해되었다. 또한 백혈구 elastase 활성에 대한 $IC_{50}$ 값은 $7.5\;{\times}\;10^{-3}\;M$이었다. 인체 치은세포에 대한 독성 시험 결과 $5\;{\times}\;10^{-2}\;M$의 HPS 첨가시 세포의 활성은 배양 2일째 47.83%로 나타났으며, $1\;{\times}\;10^{-2}\;M$의 HPS 첨가시에도 68.53%로 나타나 비교적 세포독성이 강한 것으로 나타났다.

치아임플란트 시술 후 삼차신경에서의 전류인지역치에 대한 연구 (A Study of Current Perception Threshold of Trigeminal Nerve after Tooth Implantation)

  • 임현대;이정현;이유미
    • Journal of Oral Medicine and Pain
    • /
    • 제32권2호
    • /
    • pp.187-200
    • /
    • 2007
  • 이 연구는 치과임플란트 시술후에 발생할수 있는 감각이상의 평가를 위하여 뉴로미터를 사용하여 정량적으로 측정하여, 임플란트 시술후의 감각신경 평가에 개관적 지침을 마련하고자 하는데 목적이 있다. 2006년 대전 썬 병원 구강내과에 내원한 환자중에 임플란트 술식을 시행한 환자 44명과 대조군 30명을 대상으로 $Neurometer^{(R)}$ CPT/C (Neurotron, Inc., Baltimore, Maryland, U.S.A.)를 이용하여 임플란트 시술전과 시술후 발사시에 2000 Hz, 250 Hz, 5 Hz,주파수로 검사를 시행하였다. 측정 부위는 임플란트 시술부위에 따라 삼차신경의 상악신경 분지와 하악신경 분지에 적용하였다. Neurometer는 세가지의 주파수 (2000 Hz, 250 Hz, 5 Hz)를 적용할 수 있는데, 각 주파수별로 대상자가 감각을 느낄 수 있는 가장 낮은 전류의 세기를 전류인지역치로 기록하였다. 각 신경섬유별 전류인지역치는 $A{\beta}$섬유의 경우 2000 Hz, $A{\delta}$섬유의 경우 250 Hz의 전류자극 하에서 특징적으로 반응하며, C섬유의 경우 5 Hz의 전류자극 하에서 반응한다. 전류인지역치 검사는 삼차신경 영역에 있어서도 말초신경 손상을 평가하기 위하여 검사를 시행할 수 있으며, 말초신경부위에 특징적인 주파수의 전류를 발생시켜 선택적인 신경 섬유를 자극한다. 서로 다른 굵기의 신경 섬유들은 각기 다른 빈도의 전류자극에 선택적으로 반응하는데, 각기 다른 주파수의 전류자극을 적용하며, 각 전류에 선택적으로 반응하는 $A{\beta},\;A{\delta}$, C신경 섬유의 반응 역치를 개별적으로 평가할 수 있다. 전류인지역치를 통한 평가에서는 전류인지 역치의 증감을 측정하여 감각과민이나 감각감퇴등의 감각이상을 진단할 수 있다. 임플란트 시술전후의 전류인지역치를 평가한 본 연구에서는 다음과 같은 결과를 얻었다. 1. 임플란트 시술 전후의 평가에서는 좌우 상하악 각각의 2000 Hz, 250 Hz, 5 Hz에서의 전류인지역치는 전반적으로 수술 후가 증가되었으며, 하악에서는 2000 Hz와 5 Hz에서 수술후에의 전류인지역치가 통계학적으로 유의하게 증가하였다. 2. 전신질환을 가지고있거나 그로 인하여 투약중인 군에서는 임플란트 수술 전후에 유의한 차이가 없었으며, 대조군에 비해서는 좌측 2000 Hz와 5 Hz에서 임플란트 시술군이 전류인지역치가 유의하게 높았다. 3. 대조군과 임플란트 수술군의 수술전의 전류인지역치 측정치의 비교에서는 우측 2000 Hz, 5 Hz에서 임플란트 시술군이 유의하게 높았으며, 대조군과 임플란트 수술후의 전류 인지 역치 평가에서는 2000 Hz에서 유의한 차이를 보였다. 4. 남자가 여자보다는 전류인지역치가 높았으나, 통계학적인 유의성을 보이지는 않았으며, 임플란트 시술군내에서도 남녀차이는 보이지 않았으며, 대조군에서 좌측 2000 Hz에서 유의하게 낮았다. 임플란트 시술 전후의 전류인지 평가에서 남녀성별에 따른 차이는 남자군에서는 통계학적 차이가 없었고, 여자군에서 우측 5 Hz, 좌측 2000 Hz에서 유의하게 높았다. 5. 감각신경이 있다고 호소하는 군과 아닌 군과의 비교에서는 감각이상을 호소하는 군이 전체적으로 전류인지역치가 증가했으나 통계학적인 유의성은 없었다. VAS상에 증가를 보이는 군의 수술전후의 전류인지측정 평가에서는 우측 5 Hz에서 임플란트 시술후 전류인지역치가 유의하게 증가하였으며, VAS 표시가 수술전후에 모두 0 인 경우에 좌측 2000 Hz에서 수술후의 전류인지역치가 유의하게 증가하였다. 이 연구는 뉴로미터를 이용하여 치아 임플란트 시술후에 발생할 수 있는 감각이상을 평가 할수 있는 객관적이고 정량적인 전류인지역치를 제시하고자 하였다.

다분류 SVM을 이용한 DEA기반 벤처기업 효율성등급 예측모형 (The Prediction of DEA based Efficiency Rating for Venture Business Using Multi-class SVM)

  • 박지영;홍태호
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.139-155
    • /
    • 2009
  • For the last few decades, many studies have tried to explore and unveil venture companies' success factors and unique features in order to identify the sources of such companies' competitive advantages over their rivals. Such venture companies have shown tendency to give high returns for investors generally making the best use of information technology. For this reason, many venture companies are keen on attracting avid investors' attention. Investors generally make their investment decisions by carefully examining the evaluation criteria of the alternatives. To them, credit rating information provided by international rating agencies, such as Standard and Poor's, Moody's and Fitch is crucial source as to such pivotal concerns as companies stability, growth, and risk status. But these types of information are generated only for the companies issuing corporate bonds, not venture companies. Therefore, this study proposes a method for evaluating venture businesses by presenting our recent empirical results using financial data of Korean venture companies listed on KOSDAQ in Korea exchange. In addition, this paper used multi-class SVM for the prediction of DEA-based efficiency rating for venture businesses, which was derived from our proposed method. Our approach sheds light on ways to locate efficient companies generating high level of profits. Above all, in determining effective ways to evaluate a venture firm's efficiency, it is important to understand the major contributing factors of such efficiency. Therefore, this paper is constructed on the basis of following two ideas to classify which companies are more efficient venture companies: i) making DEA based multi-class rating for sample companies and ii) developing multi-class SVM-based efficiency prediction model for classifying all companies. First, the Data Envelopment Analysis(DEA) is a non-parametric multiple input-output efficiency technique that measures the relative efficiency of decision making units(DMUs) using a linear programming based model. It is non-parametric because it requires no assumption on the shape or parameters of the underlying production function. DEA has been already widely applied for evaluating the relative efficiency of DMUs. Recently, a number of DEA based studies have evaluated the efficiency of various types of companies, such as internet companies and venture companies. It has been also applied to corporate credit ratings. In this study we utilized DEA for sorting venture companies by efficiency based ratings. The Support Vector Machine(SVM), on the other hand, is a popular technique for solving data classification problems. In this paper, we employed SVM to classify the efficiency ratings in IT venture companies according to the results of DEA. The SVM method was first developed by Vapnik (1995). As one of many machine learning techniques, SVM is based on a statistical theory. Thus far, the method has shown good performances especially in generalizing capacity in classification tasks, resulting in numerous applications in many areas of business, SVM is basically the algorithm that finds the maximum margin hyperplane, which is the maximum separation between classes. According to this method, support vectors are the closest to the maximum margin hyperplane. If it is impossible to classify, we can use the kernel function. In the case of nonlinear class boundaries, we can transform the inputs into a high-dimensional feature space, This is the original input space and is mapped into a high-dimensional dot-product space. Many studies applied SVM to the prediction of bankruptcy, the forecast a financial time series, and the problem of estimating credit rating, In this study we employed SVM for developing data mining-based efficiency prediction model. We used the Gaussian radial function as a kernel function of SVM. In multi-class SVM, we adopted one-against-one approach between binary classification method and two all-together methods, proposed by Weston and Watkins(1999) and Crammer and Singer(2000), respectively. In this research, we used corporate information of 154 companies listed on KOSDAQ market in Korea exchange. We obtained companies' financial information of 2005 from the KIS(Korea Information Service, Inc.). Using this data, we made multi-class rating with DEA efficiency and built multi-class prediction model based data mining. Among three manners of multi-classification, the hit ratio of the Weston and Watkins method is the best in the test data set. In multi classification problems as efficiency ratings of venture business, it is very useful for investors to know the class with errors, one class difference, when it is difficult to find out the accurate class in the actual market. So we presented accuracy results within 1-class errors, and the Weston and Watkins method showed 85.7% accuracy in our test samples. We conclude that the DEA based multi-class approach in venture business generates more information than the binary classification problem, notwithstanding its efficiency level. We believe this model can help investors in decision making as it provides a reliably tool to evaluate venture companies in the financial domain. For the future research, we perceive the need to enhance such areas as the variable selection process, the parameter selection of kernel function, the generalization, and the sample size of multi-class.

인적자원의 혁신성, 학습지향성, 이들의 상호작용이 혁신효과 및 사업성과에 미치는 영향 : 중소기업과 대기업의 비교연구 (The Impact of Human Resource Innovativeness, Learning Orientation, and Their Interaction on Innovation Effect and Business Performance : Comparison of Small and Medium-Sized vs. Large-Sized Companies)

  • 여은아
    • 중소기업연구
    • /
    • 제31권2호
    • /
    • pp.19-37
    • /
    • 2009
  • 본 연구의 목적은 인적자원의 혁신성과 학습지향성이 혁신효과 및 사업성과에 미치는 영향관계를 연구함에 있어 중소기업과 대기업의 차이를 알아보는 것이었다. 다양한 업종의 실무자 479명으로부터 수집한 설문자료를 t-검정, 회귀분석 등을 이용하여 분석하였다. 연구결과에서 대기업은 중소기업에 비해 인적자원의 혁신성, 학습지향성, 혁신효과, 사업성과 면에서 더 높은 수준을 보였다. 혁신효과를 종속변인으로 한 회귀분석 결과에서 인적자원의 혁신성, 학습지향성, 인적자원의 혁신성-학습지향성의 상호 작용 변인이 혁신효과에 영향을 미치는 것으로 나타났고, 기업규모의 조절효과도 확인되어 중소기업의 경우 대기업에 비해 인적자원의 혁신성이 혁신효과에 미치는 영향이 더 크고, 대기업의 경우 중소기업에 비해 학습지향성이 혁신효과에 미치는 영향이 더 크다는 사실을 알 수 있었다. 사업성과를 종속변인으로 한 회귀 분석 결과에서는 학습지향성, 혁신효과, 인적자원의 혁신성-학습지향성의 상호작용 변인이 유의한 영향을 미치는 것으로 나타났으며, 기업규모의 조절효과가 확인되었다. 연구결과를 토대로 기업을 위한 시사점이 제시되었는데, 중소기업과 대기업 모두 혁신효과와 사업성과를 끌어올리기 위해 인적자원의 혁신성과 학습 지향적 문화의 확산에 고루 투자함으로서 성공적인 혁신 상품과 서비스 개발을 이루고, 궁극적으로 사업성과의 향상에 기여할 수 있을 것이다.