• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.4
• /
• pp.321-327
• /
• 2007

In an apartment house that is generally air-tight and well insulated, the combustion gas from cooking devices is the major source of air pollution in the kitchen. It spreads throughout the house affecting the overall Indoor all quality. In this study, the performance of the kitchen range hood which employs air induction and air curtain was investigated by numerical simulation. The results are compared with that of two other kitchen range hoods which are in general use. The two general types of range hoods considered in the present calculations are box and plate type range hoods. The former has a large capture space between the filter and suction duct, while the latter has little. It was found that the capture efficiency of the kitchen range hood with air induction and air curtain Is higher than that of the general types of range hoods by 20% approximately The reason may be because the air induction and the air curtain block the air stream escaping from the front and the side part of range hoods effectively and because an additional fan for air induction and air curtain increases suction flow rates.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.2
• /
• pp.111-116
• /
• 2023

We provided general anesthesia management to a patient with advanced atrioventricular block, which was discovered in the remote period after open-heart surgery. A 21-year-old man with Noonan syndrome was scheduled to undergo excision of a median intramandibular tumor. At 2 months of age, the patient underwent endocardial repair for congenital heart disease. During our preoperative examination, an atrioventricular block was detected, which had not been previously noted. Emergency drugs were administered, and a transcutaneous pacemaker was placed. During anesthesia induction, mask ventilation was easy, and intubation was performed smoothly using a video laryngoscope. The transcutaneous pacemaker was activated in demand mode at a pacing rate of 50 cycles/min approximately throughout the anesthesia time, and the hemodynamic status remained stable. The effect of intraoperatively administered atropine was brief, lasting only a few seconds. Although body movements due to thoracoabdominal muscle spasm were observed during pacemaker activation, they did not interfere with surgery. In postoperative patients with congenital heart disease, an atrioventricular block may be identified in the remote period, and preoperative evaluation should be based on this possibility. In addition, during anesthesia management, it is important to prepare multiple measures to maintain hemodynamic status.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.12
• /
• pp.715-732
• /
• 2009

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2008. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends in thermal and fluid engineering have been surveyed in the categories of general fluid flow, fluid machinery and piping, new and renewable energy, and fire. Well-developed CFD technologies were widely applied in developing facilities and their systems. New research topics include fire, fuel cell, and solar energy. Research was mainly focused on flow distribution and optimization in the fields of fluid machinery and piping. Topics related to the development of fans and compressors had been popular, but were no longer investigated widely. Research papers on micro heat exchangers using nanofluids and micro pumps were also not presented during this period. There were some studies on thermal reliability and performance in the fields of new and renewable energy. Numerical simulations of smoke ventilation and the spread of fire were the main topics in the field of fire. (2) Research works on heat transfer presented in 2008 have been reviewed in the categories of heat transfer characteristics, industrial heat exchangers, and ground heat exchangers. Research on heat transfer characteristics included thermal transport in cryogenic vessels, dish solar collectors, radiative thermal reflectors, variable conductance heat pipes, and flow condensation and evaporation of refrigerants. In the area of industrial heat exchangers, examined are research on micro-channel plate heat exchangers, liquid cooled cold plates, fin-tube heat exchangers, and frost behavior of heat exchanger fins. Measurements on ground thermal conductivity and on the thermal diffusion characteristics of ground heat exchangers were reported. (3) In the field of refrigeration, many studies were presented on simultaneous heating and cooling heat pump systems. Switching between various operation modes and optimizing the refrigerant charge were considered in this research. Studies of heat pump systems using unutilized energy sources such as sewage water and river water were reported. Evaporative cooling was studied both theoretically and experimentally as a potential alternative to the conventional methods. (4) Research papers on building facilities have been reviewed and divided into studies on heat and cold sources, air conditioning and air cleaning, ventilation, automatic control of heat sources with piping systems, and sound reduction in hydraulic turbine dynamo rooms. In particular, considered were efficient and effective uses of energy resulting in reduced environmental pollution and operating costs. (5) In the field of building environments, many studies focused on health and comfort. Ventilation. system performance was considered to be important in improving indoor air conditions. Due to high oil prices, various tests were planned to examine building energy consumption and to cut life cycle costs.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.1
• /
• pp.14-23
• /
• 2002

Background: The opitmal ventilator setting during partial liquid ventilation(PLV) is controversial. This study investigated the effects of various gas exchange parameters during PLV in normal rabbit lungs in order to aid in the development of an optimal ventilator setting during PLV. Methods: Seven New-Zealand white rabbits were ventilated in pressure-controlled mode with the following settings; tidal volume($V_T$) 8 mL/kg, positive end-expiratory pressure(PEEP) 4 $cmH_2O$, inspiratory-to-expiratory ratio(I:E ratio) 1:2, fraction of inspired oxygen($F_TO_2$) 1.0. The respiration rate(RR) was adjusted to keep $PaCO_2$ between 35~45 mmHg. The ventilator settings were changed every 30 min in the following sequence : (1) Baseline, as the basal ventilator setting, (2) Inverse ratio, I:E ratio 2:1, (3) high PEEP, adjust PEEP to achieve the same mean inspiratory pressure (MIP) as in the inverse ratio, (4) High $V_T$, $V_T$ 15 mL/kg, (5) high RR, the same minute ventilation (MV) as in the High $V_T$. Subsequently, the same protocol was repeated after instilling 18 mL/kg of perfluorodecalin for PLV. The parameters of gas exchange, lung mechanics, and hemodynamics were examined. Results: (1) The gas ventilation(GV) group showed no significant changes in the $PaO_2$ at all phases. The $PaCO_2$ was lower and the pH was higher at the high $V_T$ and high RR phases(p<0.05). No significant changes in the lung mechanics and hemodynamics parameters were observed. (2) The baseline $PaO_2$ for the PLV was $312{\pm}$ mmHg. This was significantly lower when decreased compared to the baseline $PaO_2$ for GV which was $504{\pm}81$ mmHg(p=0.001). During PLV, the $PaO_2$, was significantly higher at the high PEEP($452{\pm}38$ mmHg) and high $V_T$ ($461{\pm}53$ mmHg) phases compared with the baseline phase. However, it did not change significantly during the inverse I:E ratio or the high RR phases. (3) The $PaCO_2$ was significantly lower at high $V_T$ and RR phases for both the GV and PLV. During the PLV, $PaCO_2$ were significantly higher compared to the GV (p<0.05). (4) There were no important or significant changes in of baseline and high RR phases lung mechanics and hemodynamics parameters during the PLV. Conclusion: During PLV in the normal lung, adequate $V_T$ and PEEP are important for optimal oxygenation.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.3
• /
• pp.347-358
• /
• 2018

Objectives: The purpose of this study is to identify the association between oral health status and pulmonary ventilatory defects. Methods: The 6th (2013-2015) National Health and Nutrition Examination Survey data was used. The study subjects were those aged 40-79 who had pulmonary function examination. Complex samples general linear model analysis, Complex samples cross-tabulation analysis, and Complex samples logistic regression analysis were conducted. Results: In terms of restrictive ventilatory defects, the study subjects (8.3%) who recognized that their oral health status was bad outnumbered those who recognized that their oral health status was good (6.1%) (p<0.05). Many of the study subjects who experienced difficulty in biting, chewing and/or speech, and who had an unhealthy periodontal had restrictive ventilatory defects and obstructive ventilatory defects (p<0.05). The association between oral health status and pulmonary ventilatory defects was analyzed. The findings showed that those who had unhealthy periodontal had a 1.33 times higher probability of pulmonary ventilatory defects than those who had a healthy periodontal (p<0.05). After taking into account general characteristics (age, sex, incomes, education, and smoking) of the subjects, the association between oral health status and pulmonary ventilatory defects was analyzed. The result found that only in cases where one experienced dental caries was an association with pulmonary ventilatory defects found. In other words, those who had dental caries showed a 0.73 times higher probability of pulmonary ventilatory defects than those who had no dental caries (p<0.05). Conclusions: Based on the findings of this research, oral health status was found to be associated with pulmonary ventilatory defects. To improve oral health, it is necessary to provide life-cycle stages based oral health education. Therefore, it is required to develop an oral health education program and develop a national oral health policy.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1784-1791
• /
• 2020

The 14 MeV neutron generator facility is being developed by the Institute for Plasma Research India to conduct the lab scale experiments related to Indian breeding blanket system for ITER and DEMO. It will also be utilized for material testing, shielding experiments and development of fusion diagnostics. Occupational radiation exposure control is necessary for the all kind of nuclear facilities to get the operational licensing from governing authorities and nuclear regulatory bodies. In the same way, the radiation exposure for the 14 MeV neutron generator facility at the occupational worker area and accessible zones for general workers should be under the permissible limit of AERB India. The generator is designed for the yield of 10¹² n/s. The shielding assessment has been made to estimate the radiation dose during the operational time of the neutron generator. The facility has many utilities and constraints like ventilation ducts, accessible doors, accessibility of neutron generator components and to conduct the experiments which make the shielding assessment challenging to provide proper safety for occupational workers and the general public. The neutron and gamma dose rates have been estimated using the MCNP radiation transport code and ENDF -VII nuclear data libraries. The ICRP-74 fluence to dose conversion coefficients has been used for the assessment. The annual radiation exposure has been assessed by considering 500 h per year operational time. The provision of local shield near to neutron generator has been also evaluated to reduce the annual radiation doses. The comprehensive results of radiation shielding capability of neutron generator building and local shield design have been presented in the paper along with detailed maps of radiation field.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.12
• /
• pp.1577-1583
• /
• 2000

Objectives : Among the various types of minimally invasive spine surgeries, thoracoscopic surgery is becoming more widely accepted and increasingly utilized. This report delineates our clinical experience using thoracoscopy to resect herniated thoracic discs in 16 patients who suffered from myelopathy or intolerable radiculopathy. Patients and Methods : Between Mar. 1997 and Sep. 1999, 16 consecutive patients underwent thoracoscopic discectomy for treatment of herniated thoracic discs. There were 12 men and 4 women(mean age 43.5 years ; range 18-61 years). Eleven patients presented with myelopathic signs and symptoms from spinal cord compression and 5 patients had incapacitating thoracic radicular pain without myelopathy. The surgical level was varied between T3 and T12. The pathology of specimen were 11 hard discs and 5 soft discs herniations. Thoracoscopic techniques were performed with long narrow spine instruments and high speed drill through 3 or 4 ports under one lung ventilated general anesthesia. During the operation three patients were converted to open thoracotomy due to intolerable one lung ventilation, excessive bleeding and inadequate operation field. The mean operation time was 264min.(range : 100-420min.), and postoperative mean admission period was 11 days. Results : Clinical and neurological outcomes were good in all patients(mean follow-up period 20 months). Among the eleven myelopathic patients, 8 improved neurologically, and 3 stabilized. Among the five radiculopathic patients, 4 recovered completely and no patient had worsened. Postoperative complications were pleural effusion in one case, intercostal neuralgia in one, delayed hemopneumothorax in one, prolonged air leakage in one and pneumonia in one case. Conclusions : Thoracoscopic discectomy needs a steep learning curve to be familiar to anatomical space and handling of endoscopic instruments. However, it is technically feasible and can be effectively performed with acceptable results.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.3 no.1 s.4
• /
• pp.28-33
• /
• 2003

Background: The fundamental responsibility of an anesthesiologist is to maintain adequate gas exchange. Failure to maintain a patent airway can result in brain damage or death. Generally, in patients with mandibular prognathism, who have the protruded mandible, the mask ventilation was thought to be not easy. The purpose of this study was to observe the degree of the difficulty of airway management in mandibular prognathism using some anatomic criteria for defining and grading difficulty of airway and difficulty of endotracheal intubation with direct laryngoscope. Methods: The observations and measurements are done to the 54 patients with mandibular prognathism, who were scheduled for corrective esthetic surgery. The case study is done to the 30 patients with normal mandible for control group. In all patients, mouth opening distance (MOD), mouse opening angle (MOA), mandibular length (ML), mandibular depth (MD), thyromental distance (TMD), thyromental area (TMA), Mallampati grades, and Cormack and Lehane grades are measured. T-test and Chi-square test are done (P < 0.05). Results: In the mandibular prognathism cases, the measurements of MD, TMD and TMA are more greater than those of controls (P < 0.05). Mallampati grades with tongue thrust are higher in the female mandibular prognathism cases than those of female controls. Most of the grades of the mandibular prognathism cases with Cormack and Lehane grading system are I or II being easy intubation cases (P < 0.05) Conclusions: In the patients of mandibular prognathism, the intubation with laryngoscope will be easer than that of normal mandible in general. It is for that their laryngeal aperture can be easily visible when the laryngoscope are used.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.4
• /
• pp.33-40
• /
• 2022

Sharehouse has been supplied as an alternative to solving the steadily increasing one-room housing problem of single-person households every year, and it is necessary to investigate the satisfaction of residents who actually live in sharehouse through P.O.E. Therefore, this study analyzed priror researches related to the existing one-person households, sharehouses, and satisfaction surveys, and summarized indicators with high relevance and frequency to derive satisfaction survey factors that can clearly evaluate the improvement architectural plan of sharehouses. As a result, it was classified into 4 items in the 'general information' category to investigate the status, housing rental type, and housing cost of the sharehouse, 15 factors in the 'peripheral environment' category to evaluate the safety, 3 factors in the 'community' category, and 17 factors in the space (facility) and service category. In the "General Information" section, the overall one-person housing satisfaction, desired sharehouse type, housing rental type, housing cost, and living expenses were reduced. In the "Surrounding Environment", accessibility to public office, accessibility to cultural facilities, accessibility to medical facilities, accessibility to work and school, convenience stores, noise pollution and safety. In addition, in the "community" section, it consists of interactions with various people, relationships with housemates and in the "space (facilities) and service" section, heating, waterproof, soundproof, ventilation, moisture and condensation blocking, facility management, interior, room size, built-in furniture, storage space, laundry, parking. Most of the scales for each factor were 5-point Likert scales, allowing evaluation of the degree of satisfaction, and some factors presented criteria to induce structured answers. Therfore, it is expected that the survey will be conducted on residents who actually live by deriving factors for the satisfaction survey of one-person households living in the sharehouse, and the current status of the sharehouse will be identified, and the degree of satisfaction will be analyzed to be used for research.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.