• Coupled systems mechanics
• /
• v.4 no.4
• /
• pp.337-364
• /
• 2015

In this paper we present methodology for parameters identification of constitutive model which is able to present behavior of a connection between two members in a structure. Such a constitutive model for frame connections can be cast in the most general form of the Timoshenko beam, which can present three failure modes. The first failure mode pertains to the bending in connection, which is defined as coupled plasticity-damage model with nonlinear softening. The second failure mode is seeking to capture the shearing of connection, which is defined as plasticity with linear hardening and nonlinear softening. The third failure mode pertains to the diffuse failure in the members; excluding it leads to linear elastic constitutive law. Theoretical formulation of this Timoshenko beam model and its finite element implementation are presented in the second section. The parameter identification procedure that will allow us to define eighteen unknown parameters is given in Section 3. The proposed methodology splits identification in three phases, with all details presented in Section 4 through three different examples. We also present the real experimental results. The conclusions are stated in the last section of the paper.

• Structural Engineering and Mechanics
• /
• v.88 no.1
• /
• pp.43-52
• /
• 2023

This paper handles the results of an extensive parametric study on the rotational stiffness of the flexible base connection using ABAQUS program. The results of the parametric study show the relation between the applied moment and the relative rotation for 96 different base connections. The configurations of the studied connections considered different numbers, diameters, and spacing of the anchor bolts along with different thicknesses of the base plate to investigate the effect of these parameters on the rotational stiffness behavior. The results of the previous parametric research used through the whale optimization algorithm (WOA) to detect different equation formulation of the moment-rotation (M-Ɵ_r) equation to detect optimum equation simulates the general nonlinear rotational behavior of the flexible base connection considering all variables used in the parametric study. WOA is a relatively new promising algorithm, which is used in different types of optimization problems. For more verification, the classical genetic algorithm (GA) is used to make a comparison with WOA results. The results show that WOA is capable of getting an optimum equation of the M-Ɵ_r relation, which can be used to simulate the actual rotational stiffness of the flexible base connections. The rotational stiffness at H/150 can be calculated using WOA (1) method and be used as a design aid for engineering design.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.13 no.4
• /
• pp.47-54
• /
• 2007

As we make every effort to improve our health, the needs and interests of the rehabilitation medicine is increasing. And as society gets more advanced and as the quality of life become higher, rehabilitation department will be important for general hospital and we need the certain guidelines about it. In this study, selected 8 general hospitals in the metropolitan area are analyzed by the analysis of drawings and comparison. The important architectural planning of rehabilitation department are the connection with orthopedics and neurosurgery and the position for convenience approach. Rehabilitation department has 0.63~1.07% of general hospital area. And the rehabilitation department is divided into four branches - medical service space, office space, public space and support space. As the number of programs in the rehabilitation department is increasing, the planning will be considered for the flexible use. And this study proposed the programs, necessary spaces, space composition and basic planning of "rehabilitation department".

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.77-85
• /
• 2009

As the multimedia technology has become in popular, many software packages that are for using those multimedia contents have also been developed. Directshow is a media framework which makes the development of such multimedia software simple, quick and regular process. In the Directshow, data are processed through the connections between filters. In general, Filtergraph is utilized to be set as 'Intelligent Connection' for filter connection. However, when we use this 'Intelligent Connection' option, they can show non-expected results or fail to connect with filter's pins together. So in this paper, we propose non-necessary filter cut-off method for connecting only just wanted filters. There are two methods such as inner filter cut-off method and outer filter one. The inner filter cut-off method is good at connection's compatibility and able to quickly connect with each other filter. But in the outer filter cut-off method, filter source is not necessary and connection is exactly done with other filter. In the end, we propose Directshow based filter cut-off model which compose of wanted filter connection and minimize error probability, through mixing up the advantages of two filter cut-off methods.

• Journal of Urban Science
• /
• v.11 no.2
• /
• pp.25-30
• /
• 2022

Resin Transfer Molding FRP (RTM FRP) is a fiber reinforced polymeric plastic which is manufactured by applying pressure to fibers, injecting resin into a mold, and then impregnating it. RTM FRP is a new construction material suitable for producing non-continuum structural elements such as sole plate because it has excellent strength and can produce many members in a short time. In this study, experiments were conducted to estimate the capacity of the bolted connection of RTM FRP. First, a tensile test was conducted to confirm the mechanical properties such as the tensile strength of the RTM FRP to be used for the bolted connection experiments. In addition, experiments were conducted on the bolted connection with the thickness of the RTM FRP and the edge distance of the bolt as variables. In the first experiment, F4.8 bolts were used, and shear failure of the bolt occurred before the RTM FRPs were failed. The F4.8 bolt is a general structural bolts used for the sole plate of a bridge bearing, and it was confirmed that the RTM FRP has a higher bold bearing strength than the shear strength of a F4.8 bolt. In the second experiment, G12.9 bolts were used, and shear failure of the bolt and bearing failure of the RTM FRP occurred simultaneously. In addition, as the thickness of the RTM FRP and the edge length of the bolt increased, the strength of the joint increased. When analogized with the bearing fracture equation of steel plate, the bolted connection of RTM FRP showed a bearing strength coefficient of 0.420 to 0.549 compared to the tensile strength, and it is considered that further research is needed.

• Journal of Chest Surgery
• /
• v.35 no.1
• /
• pp.48-51
• /
• 2002

The conversion of failing Fontan circuit to total cavopulmonary connection(TCPC) is recommended as a therapeutic option in patients with late Fontan complications such as atrial arrhythmia, atrial enlargement, pulmonary venous obstruction, and ventricular dysfunction. Combined TCPC with extracardiac conduit and cryoablation of arrhythmia circuit is preferred for treatment of failing Fontan coulection with atrial lachyarrhythrnia. We report a case of conversion of atriopulmonary connection to extracardiac conduit Fontan and cryoablation of atrial arrhythmia circuit in a patient with tricuspid atresia, who also had ectopic atrial tachycardia, right atrial thrombi, pulmonary venous obstruction, and ventricular dysfunction. This patient and the parents were Jehovah's Witnesses; therefore, the patient underwent the procedure without blood transfusion.

• Korean Journal of Mathematics
• /
• v.17 no.3
• /
• pp.293-298
• /
• 2009

In this paper we make a connection between the specific class of weighted shifts and general study of k-hyponormality. We show how the k-hyponormality of an arbitrary operator can be ascertained by examining the k-hyponormality of an associated family of weighted shifts.

• Journal of Distribution Research
• /
• v.3 no.1
• /
• pp.145-158
• /
• 1998

The selection of proposed sites for the general logistic center of agriculture products would be made the most suitable place by considering the spread of population as real consumers, the prospect of the demand, the expansion of traffic system, the regional, hourly and carring traffic volume and the use of land based urban planning, etc. As the preconsideration, the possible occupant companies have to be selected on the category of business and the district. After posing questions and having interview, several selected regions would be compared and analysed for deciding the most suitable place. The model for the general logistic center of agricultural products must be selected taking key factors approach for choosing key factors at first and referring to many documentary records. And the more, cooperating with the specialists for location selection and making objective questions to concerned companies, the most suitable place is selected by marking high score for the moderate land cost, the low traffic jam, the connection with the back cities and the possible expansion as the general logistic center of agriculture products.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1222-1228
• /
• 1998

Most of researchers have tried to find heuristic methods for near-optimal solutions of establishing light paths with minimum number of wavelengths in wavelengh-routed optical networks. In order to provide a performance measure for heuristic approaches, we propose a practical approach for a lower bound of the number of wavelengths which is required to provide full connections in WDM-based optical transport networks. This method is based on a path-flow formulation using K-shortest paths for each connection. Compared with a general link-flow formulation, the proposed method has much lower complexity and so needs much less calcuation tiem while it gives the same results as a general link-flow formulation in some sample networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.231-241
• /
• 1994

To overcome the limit of a point-point connection type service which is common to the ISDN bearer services, a new concept of network element, Service Node, which can provide multiparty connections and control the teleservices on those connections is proposed. This will support conference type multiparty multimedia services among normal ISDN subscribers. In this paper, as a primary study on this concept, we deduce some attributes of the general conference type services and examine the methods and procedures to provide that kind of services through the ISDN. Based on this study, we also define the general requirements and basic structure for the Service Node realization, thus give shape to the concept of it.