• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.341-342
• /
• 2018

대양을 운행하는 선박의 최적 항로에 대한 기존의 연구와는 다르게, 본 연구에서는 연안을 운행하는 선박의 항로 계획을 위한 최적화 방법을 제안하였다. 일반적으로 연안을 운행하는 여객선의 경우 허가 받은 항로를 기준으로 항로에 표시된 변침점을 따라 운행한다. 따라서 본 연구에서는 변침점 사이의 속도를 결정하기 위한 제동 동력과 시간을 고려한 목적 함수를 제안하였고, 목포와 제주를 오가는 여객선의 실제 항로에 본 연구에서 제안한 방법을 적용하여 최적의 속도를 결정하였다.

• 한국정보통신학회논문지
• /
• 제21권7호
• /
• pp.1455-1463
• /
• 2017

세계경기가 저성장, 저소비, 높은 실업률, 고위험, 짧은 호황 긴 불황 등을 기록하고 있다. 이에 따라 해운경기가 하락하여 선박 유지비용의 절감이 불가피해지고 있다. 이를 위해 그린 선박, 에코 선박, 스마트 선박과 같은 선박의 에너지를 절감하기 위한 연구가 활발히 진행 중에 있다. 친환경 선박에서 배터리를 사용하는 전력관리시스템은 중요한 연구분야 중 하나이다. 본 논문에서는 발전기만을 사용하는 일반적인 선박의 전력관리시스템의 중부하 제어를 분석하고 배터리 연계형 전력관리시스템에서 중부하를 제어하는 알고리즘을 연구하였다. 이를 위해 배터리 연계형 전력관리시스템의 구성을 제안하고 제안된 시스템을 기반으로 배터리 연계형 전력 시뮬레이터를 구성하였다. 구성된 시뮬레이터를 통해 배터리 연계형 전력관리시스템에서 중부하 제어에 따른 배터리의 동작을 정의하고 이를 확인하였다.

• 한국항해항만학회지
• /
• 제44권4호
• /
• pp.354-361
• /
• 2020

"선용품" 이라는 용어는 일반적으로 선박에서 사용되는 모든 관련 기계적 부속품과 소모성 자재를 통칭하는 용어이다. 선박은 원양을 운항하기에 긴급 상황에서 선용품에 대한 수요가 발생할 경우 긴밀하게 대응하기가 쉽지 않다. 특히, 부정기선의 경우 더욱 선용품의 보급계획을 예측하기 어려우므로 적정 보급지를 결정하는 것은 어려운 일이다. 본 연구는 각 선주사 및 선박관리업체를 대상으로 한 설문 조사를 통해 부정기선박의 보급지 결정 시 고려되는 요소와 중요도를 파악하였다. 이를 통해 각 국가별, 항만별 공급절차를 제시하였고, 이를 통해 효율적인 선용품 보급 물류 방식을 제안하였다.

• 해양환경안전학회지
• /
• 제9권1호
• /
• pp.41-50
• /
• 2003

한국 연안의 각 항로에 취항하고 있는 대표적인 선형의 여객선들을 대상으로, 각 선형별로 선체운동 계산, 내항성능을 분석하여 선박의 안전성을 평가하였다. 이를 위하여 선박의 안전운항과 가장 밀접한 관련을 갖는 바람과 파랑을 주요 해역별로 비교 분석하였다. 이러한 기강정보를 입력요소로 하여 주요해역을 항행하는 대표적인 선형의 여객선들에 대하여 수치 시뮬레이션을 실시하여 여객선의 항해안정성을 평가하였다.

• 융합신호처리학회논문지
• /
• 제20권4호
• /
• pp.186-192
• /
• 2019

일반적으로 운항 중인 선박이나 건조 중인 선박의 선저에는 많은 해양 생물들이 부착된다. 이러한 현상으로 인해 선박 표면의 거칠기가 증가하여 선박속도의 손실이 발생하게 되고 결과적으로 경제적 손실 및 환경오염 등의 발생을 초래하게 된다. 본 연구에서는 선박 선저에 부착된 해양생물 및 선저 상태를 검사하는 수중드론 등의 카메라 영상을 획득/활용한다. 획득된 해당 영상은 관리자 육안확인에 의해 해양 생물들에 따른 거칠기 등을 판단하게 된다. 이에 영상을 보정하는 필터 알고리즘을 원본 영상에 적용함으로써 해양 생물들 부착 여부 등에 대한 올바른 판단에 도움을 줄 수 있다. 수중 영상의 보정 알고리즘에는 다양한 필터가 필요하며, 어두운 수중 환경에 맞는 조명이 판단에 많은 영향을 미치므로 조명의 밝기 정도에 따른 해양 생물 부착 여부 판단에 대한 내용도 소개하고자 한다. 본 연구에서 적용된 보정 알고리즘 및 각 알고리즘별 조명 밝기에 따른 연구테스트 결과는 많은 분야에 적용 가능할 것으로 사료된다.

• 해양환경안전학회지
• /
• 제3권1호
• /
• pp.51-71
• /
• 1997

As passenger ship accidents so frequently have occurred, crisis consciousness is highly aroused in Korean society. Although bombastic policy guidlines were suggested in accordance with every passenger ship accident, there remains a still high possibility of such an accident reoccurring because passenger ship accidents occur from the perspective of non-compliance. The research objective of this study is to government's safety regulatory policies. Data for the analysis was collected from literature review. A Case study related to passenger ship accident is adopted for the analysis. The research methods utilized in this study consist of extensive quantitative analysis of 138 passenger ship accidents which had happened over last 10 years from 1984 to 1993 in Korea and a qualitative analysis of the passenger ship accident of the Seohae Ferry in October 1993. The results of the quantitive analysis on the 138 passenger ship accidents are as follows; Seeing the accidents yearly, the accidents which occurred by policy non-compliance are still exist, only somewhat reduced as years gone by. Seeing the accidents from the perspective of types of accident, fire accidents and death and injury accidents had more non-compliance factors than contact accidents and one-side collision accidents, etc. had. Seeing the accidents from the perspectives of types of passenger ship, large ships like car ferries and general passenger ship accidents had more non-compliance factors than any other kinds of ships had. Seeing the accidents from the perspectives of tons of passenger ships, large ships weighing more than 1, 000 tons and small ships weighing less than 50tons contained a lots of non-compliance factors. The results of the qualitative analysis of the passenger ship accident of the Seohae Ferry in Octovber 1993 are as follows; From the viewpoint of the human factor, there were non-compliance to the recruiting of required number of qualified crew members and non-compliance to the rule which prohibited them from leaving port in bad weather and high wave conditions. From the viewpoint of the ship factor, there were defects in the ship. So we might say that there was non-compliance which was aroused from the lacks of technical skills. From the viewpoint of the administrative factor, there were many non-compliance factors such as sailor education, shipping management, rescue, safety equipment. From the viewpoint of the passenger factor, there were passengers' threats which compelled the crews to leave the port under bad weather conditions. In conclusion, the principal non-compliances factors are passenger ship company did not follow safety rules such as shipping the permitted number of passengers, loading permitted tons of freight and fastening freights properly and recruiting required number of qualified crew. In order to reduce accidents, firstly we should find out the causes which play key roles in passenger ship companies' non-compliance to the government's safety regulations. Secondly we should tackle the causes.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.28-33
• /
• 2015

The icebreaking research vessel ARAON had her second ice trial in the Arctic Ocean from July 16 to August 12, 2010. In this study, the ice loads measured during the “general” operation and “ice breaking” operation in ice-covered waters were analyzed and compared. Whereas the “general” operation stands for the voyage in the water partially covered by ice, the “ice breaking” operation involved substantial ice floes for the ice breaking performance test. Based on the measured data, comparisons of the relationship between the ship speed and ice load, and between the locations of strain gauges and ice loads were investigated. Peak stresses higher than 20 MPa were found. The longitudinal and vertical correlations between the measurement location and ice load were analyzed, and the probability of peak stress was calculated. As a result, the probability function for higher ice loads during both operation modes was expressed in an exponential and power forms.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.43-49
• /
• 2006

The hull form of icebreaking tanker depends on the trade route and ice characteristic. The hull form has to be designed for icebreaking concept if the vessel is operating in heavy ice and also the hull from has to be optimized for general tanker when the ship is operating in ice-free ocean. This paper presents comparison of ship resistance in pack ice, level ice and open water. Four ships are used to compare the resistance characteristic. One is conventional tanker and three ships are icebreaking tankers. The ice model test was carried out at the IOT (Institute for Ocean Technology, Newfoundland, Canada) and open water test was performed at 55MB (Samsung Ship Model Basin). The ice resistance of conventional tanker was predicted by Colbourne's method. The resistance of open water, pack ice and level ice are compared and discussed. The best hull form of icebreaker is not good in open water performance compare to conventional tanker. This result explains that the hull form of icebreaker and normal tanker have to compromise when the ship is operated in ice and ice-free condition. The result of this paper gives a guide for icebreaking tanker design.

• 한국항해학회지
• /
• 제10권1호
• /
• pp.101-127
• /
• 1986

Transportation provides an infrastructure vital to economic growth, and it is an integral part of production . As a port is the interface between the maritime transport and domestic transport sectors, it certainly plays a key role in any economic development. Therefore, it is doubtless that inadequacy of a nation's port will depress the level of throughput, to the level where it fails to meet the target set by the national economic planning schemes. Korea is surrounded by the seas and the economic structure of Korea consists of processing trades, so that it cannot be overstated that substantial economy in maritime transport coasts can be achieved through the improvement of the port transport system. This paper treats the transportation process in Pusan Port by Queueing Simulation method, and the reasonable size of Pusan Port is suggested from the point of view of efficiency maximization. The results of the analysis are summarized as follows; 1) the utility rate is 47.91 percents in general piers, 85-52 percents in container piers, and waiting time 5.2hrs, in general piers, 0.8 hrs, in container piers, and the probability of maximum queue length 12 ships in general piers, 2 ships in container piers, and the probability of waiting is 44 percents in general piers, 8 percents in container pier. 2) in general piers, the improvement of app. 30 percents in port capacity is desirable for operating effectively concerning the current arrival rate. By introducing the traffic control ion container piers, there is no apparent necessity of port investment, but I is expected to reduce invisible congestion occurred along the waiting line. 3) On Pusan Port, the optimal utility rate and the optimal arrival rate for reducing waiting time are 3.5 to 4.0(hrs./ship) in general piers, 5.1 to 6.0(hrs./ship) in container piers.

• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.66-74
• /
• 2003

In non-contact underwater explosion shock test of a real naval ship, measurement of shock loadings and responses should require onboard system to be able to safely trigger an explosive and to simultaneously and successfully measure scores of shock signals in the deteriorated environment. For this purpose, we have developed a shock-hardened measurement system resistible to 170g peak acceleration having 4 msec duration by resiliently mounting general purpose measurement instruments in racks. The system can simultaneously measure and record 200 signals to evaluate shock leadings and responses of the test ship by triggering an explosive and measurement instruments at the same time. We prove the performance of the developed system by introducing the signal acquisition results from of a real ship underwater shock test, firstly performed in Korea.