• Journal of the Korean Institute of Educational Facilities
• /
• v.26 no.6
• /
• pp.29-37
• /
• 2019

The research institute has a function to get the research outcome through the various experiments, data collection and analysis. Therefore, research building is important to keep the research condition or experiment environment. But buildings would be deteriorated and leaded into the deterrence of research. Maintenance is planned to protect the research building condition through various general repair or heavy repair. The heavy repair is generally conducted in massive repair scope or main components preparation. In this paper, it aimed at analyzing the effect of the massive or main components repair with inputted cost and its resulted output. In order to analyze the effect of a massive repair, it used the Benefit/Cost analysis and sensitivity analysis. Results of this study are as follows : The benefit/cost analysis shows that research building whose researcher continuously live and study has good effect. On the contrary, pace of the the experimental function is not good effect in benefit/cost analysis. But the experimental function is indispensible to get the research outcom for the research goal. Therefore, the experimental function will be planned to repair and get the historical repair data because the proper repair time would be prepared to cut down the repair cost.

• Molecules and Cells
• /
• v.19 no.1
• /
• pp.23-30
• /
• 2005

Spinocerebellar ataxia type 1 (SCA1) is an autosomal-dominant neurodegenerative disorder caused by expansion of the polyglutamine tract in the SCA1 gene product, ataxin-1. Using d2EGFP, a short-lived enhanced green fluorescent protein, we investigated whether polyglutamine-expanded ataxin-1 affects the function of the proteasome, a cellular multicatalytic protease that degrades most misfolded proteins and regulatory proteins. In Western blot analysis and immunofluorescence experiments, d2EGFP was less degraded in HEK 293T cells transfected with ataxin-1(82Q) than in cells transfected with lacZ or empty vector controls. To test whether the stability of the d2EGFP protein was due to aggregation of ataxin-1, we constructed a plasmid carrying $ataxin-1-{\Delta}114$, lacking the self-association region (SAR), and examined degradation of the d2EGFP. Both the level of $ataxin-1-{\Delta}114$ aggregates and the amount of d2EGFP were drastically reduced in cells containing $ataxin-1-{\Delta}114$. Furthermore, d2EGFP localization experiments showed that polyglutamine-expanded ataxin-1 inhibited the general function of the proteasome activity. Taken together, these results demonstrate that polyglutamine-expanded ataxin-1 decreases the activity of the proteasome, implying that a disturbance in the ubiquitin-proteasome pathway is directly involved in the development of spinocerebellar ataxia type1.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1059-1068
• /
• 1993

We will put the emphasis on the analysis of arbitrarily shaped microstrip antennas. The most general and rigorous treatment of microstrip antennas is given by the electric field integral equation(EFIE), usally formulated in the spectral domain. In this paper, we use a modification of EFIE, called the mixed potential integral equation(MPIE) , and we solve it in the space domain. This technique uses Green's functions associated with the scalar and vector potential which are calculated by using stratified media theory and are expressed as Sommerfeld integrals. The integral equation is solved by a moment's method using rooftop subsectional basis function. Thus, microstrip patches of any shape can be analysed at any frequency and for any substrate. Numerical results for a rectangular patch and for a L-shaped patch are given and compared with measured values.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.5
• /
• pp.39-45
• /
• 1978

This paper described on the varactor tuning Gunn oscillator for X band. Analyzed the coplanar 2 post case using the dyadic Green's function then derived the obstacle network for the incident TE10 mode. For the electronical tuning, used the tuning varactor diode which has a high speed dynamic response characteristic and high Q. Oscillation frequency, switching mode, and stable oscillation point were calculated by the computer simulation. In the expriments, switching mode was occurred at 18 mm, 32.5 mm of the short tcircuit position, respectively. The general characteristics of the varactor tuning Gunn oscillator were abruptly changed by the moving of the short circuit and the variation of the bias voltage.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.2
• /
• pp.64-72
• /
• 1989

A response prediction model is introduced for the non-lockin vibration of a marine riser in sheared flow, where the riser is modelled as linearly varying tensioned-beam. This prediction model is based on the Green's function approach and random vibration theory. This model, of course, can treat general beams having slowly varying spatial system parameters. According to the predicted result of a marine riser by the prediction model proposed in this paper, the dynamic behavior of a marine riser has the mixed characteristics of finite and infinite boundary behavior. Furthermore the velocity response distribution along the riser length is much similar with the sheared flow profile. The predicted response result of a marine riser having linearly varying tension was also compared to that of constant mean tensioned-beam model. It was found that the constant mean tensioned-beam case gives over-estimated responses at the top side of the riser.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.806-816
• /
• 2022

Purpose: In this study, the luminance measurement analysis results of the smoke generation state are considered for visual signal display light color for real-time escape guidance in the underground common area. Method: We will analyze the scattering characteristics of light in the atmosphere and optical technology based on the visibility theory, and try to classify the elemental technology as a guidance function through a prototype of a visual signal display device for evacuation guidance. Result: In the experiment conducted under the smoke-generating condition, the results were derived with low luminance ratio and good visibility in the order of red, green, and yellow. However, this result is different from general lighting in which color rendering is considered, and is limited to signals for signals and detection. Conclusion: A conclusions were drawn by reflecting both the luminance measurement results in the smoke generation situation and the preference survey results conducted in previous studies for the light color of the visual signal for signal and detection. When events such as smoke occur, it is better to use the escape guidance visual signal in red or green.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.1 s.47
• /
• pp.17-23
• /
• 2006

The research on strong ground motions became important recently due to more severe requirement of seismic design for the domestic buildings and structures. The empirical Green's function method, which uses similarities between small and large earthquakes, was applied to make synthetic ground motions. That method was applied to the 2 earthquakes which occurred sequently in time within narrow area in Japan. The strong ground motions for the virtual earthquake (magnitude 6.5) were synthesized using those observed from the magnitude 4.7 earthquake. Then, the synthesized ground motions (acceleration, velocity, and displacement) were compared to those observed from real earthquake (magnitude 6.5). The results showed that the general shapes of waveforms in time domain and the Fourier spectrum In frequency domain from synthesized ground motions (acceleration, velocity, and displacement) are similar to the observed strong ground motions within acceptable degree. The peak values of 3 kinds of synthesized strong ground motions in time domain are comparable between the synthesized and the real strong ground motions, especially only about 9% difference in acceleration peak value.

• Journal of architectural history
• /
• v.7 no.4 s.17
• /
• pp.151-163
• /
• 1998

This Study is concerned with the color design of Korean and Japanese wooden architecture. The main subject of the study is to investigate the commonness and difference of color decoration between Korean and Japanese Buddhist 'Danchung' in the modern ages. In carrying this study into execution, I examined the architectural and historical backgrounds, and analysed the elements, techniques and principles of color design. The result of this study is as follows ; 1. 'Danchung' was originated from the practical functions in Chinese wooden architecture, and developed to embody sensuous beauty in Buddhist temple. The techniques and principles of color design and color tone of Korean and japanese Danchung had been similar in the ancient ages. But little by little they have differed in its function and color tone. So they are very different in modern times. 2. The dominant colors of Korean Danchung are red and green as 'Sang-nok Ha-dan(上綠下丹)', but Japanese's is only red as 'Bak-gan Juk-sun(白間赤線)' 3. Korean Danchung expresses and accentuates the important structural elements in three dimensions, on the other hand japanese Danchung takes two dimensional decoration on the unstructural elements 4. When seen in general, in Korean Danchung colors and their light and shade are simple and patternized. In the meantime, Japanese Danchung has many configurational expressions in general and is closed to paintings or picture.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.125-135
• /
• 2013

Analysis and evaluation of uncertainty is adopting the advanced methodology among the methods for greenhouse gas emission assessment that was defined in GPS2000 (Good practice guideline 2000) and GPG-LULUCF (GPG Land Use, Land-Use Change and Forestry). In 2006 IPCC guideline, two approaches are suggested to explain the uncertainty for each section with a national net emission and a prediction value on uncertainty as follows; 1) Spread sheet calculation based on the error propagation algorithm that was simplified with some assumptions, and 2) Monte carlo simulation that can be utilized in general purposes. There are few researches on the agricultural field including greenhouse gas emission that is generated from livestock and cultivation lands due to lack of information for statistic data, emission coefficient, and complicated emission formula. The main objective of this study is to suggest an evaluation method for the uncertainty of greenhouse gas emission in agricultural field by means of intercomparison of the prediction value on uncertainties which were estimated by spread sheet calculation and monte carlo simulation. A statistic analysis for probability density function for uncertainty of emission rate was carried out by targeting livestock intestinal fermentation, excrements treatment, and direct/indirect emission from agricultural lands and rice cultivation. It was suggested to minimize uncertainty by means of extraction of emission coefficient according to each targeting section.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.643-648
• /
• 2011

This paper deals with the ESM(equivalent source method) with the continuation of acoustic near-field for NAH(near-field acoustic holography) to overcome the finite measurement aperture effect and reconstruct the normal velocity on an arbitrarily shaped structure surface. The continuation method is an extension of the measured sound field into a region outside and is based on the Green's function relating acoustic quantities on the two conformal surfaces. This algorithm is not limited to planar surfaces and can be applied to arbitrarily shaped surfaces. The ESM is an alternative approach of BEM-based NAH for the reconstruction on a general structure. In ESM the acoustic field is represented by a set of point sources located over a surface that is close to the structure surface. The simulation results of this study shows that the reconstruction error of particle velocity on the source surface is 11% and 16% for planar and cylindrical sources separately.