• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.77-77
• /
• 2001

This study investigates the rheological properties of in-situ polymerized solutions of polyacrylonitrile(PAN) and acrylonitrile(AN)-itaconic acid(IA) in dimethyl sulfoxide(DMSO) in terms of temperature, concentration, and time. The complex viscosity and storage modulus of the solutions were generally increased with elapsing time, which is ascribable to the three-dimensional pseudostructures formed by strong inter- or intra-molecular attractions through Polar -CN and -COOH groups. The three-dimensional pseudonetworks would lead to gelation of the acrylic solutions in long term. This was more noticeable at higher temperature within the temperature range examined. In the case of 20% solutions one can not observe lower Newtonian flow region in the viscosity curve. Disappearance of lower Newtonian flow region is indicative of heterogeneity of the solution system. Casson Plot of the viscosity data revealed that 20% solutions of PAN and AN-IA copolymer in DMSO clearly demonstrated positive yield stress, ascertaining formation of pseudostructures in the solution systems.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.33-39
• /
• 1995

To accelerate the cure of phenolic resin adhesives for plywood, the complexation with melamine resin and the addition of cure-accelerating agents were discussed. The hot-pressing temperature and time of phenol resin could be decreased by complexation with melamine resin. but the wet glue-joints strength of phenol melamine resin was lower than that of ordinary phenol resin in case of plywood using spruce veneer at core layer. Among the tested cure-accelerating agents. the sodium carbonate showed the greatest effect on shortening gelation time of phenolic resin. In addition, in the manufacturing scale test, the hot-pressing time of phenol resin with the addition of 5 parts sodium carbonate could be shortened about 20% compared with ordinary phenol resin which had same glue-joints properties.

• Journal of the Korean Ceramic Society
• /
• v.30 no.10
• /
• pp.838-844
• /
• 1993

To control the pore size of silcia gel, formamide (FA), N,N-dimethyl formamide (DMF), polyethylene glycol (PEG) and polyacrylic acid (PAA) were added in the sol-gel process from starting solution with tetramethyl orthosilicate (TMOS). The gels were characterized using porosimeter, TG-DTA and SEM. As a result, the more contents of FA and PAA was increased the more gelation time was decreased, also the more contents of DMF and PEG was increased the more gelling time was increased. The mean pore size of gels was larger in the order of PAA, DMF, FA and PEG. And the mean pore size of porous silica glass was 59.0$\AA$, 31.5$\AA$, 29.9$\AA$ and 29.0$\AA$, respectively, heated at 75$0^{\circ}C$/100$0^{\circ}C$.

• Journal of the Korean Mathematical Society
• /
• v.39 no.4
• /
• pp.543-558
• /
• 2002

We investigate the fragmentation process developed by Kolmogorov and Filippov, which has been studied extensively by many physicists (independently for some time). One of the most interesting phenomena is the shattering (or disintegration of mass) transition which is considered a counterpart of the well known gelation phenomenon in the coagulation process. Though no masses are subtracted from the system during the break-up process, the total mass decreases in finite time. The occurrence of shattering transition is explained as due to the decomposition of the mass into an infinite number of particles of zero mass. It is known only that shattering phenomena occur for some special types of break-up rates. In this paper, by considering the n-particle system of stochastic fragmentation processes, we find general conditions of the rates which guarantee the occurrence of the shattering transition.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.66-69
• /
• 2001

A subsurface containment system which is constructed by pumping a gelling liquid (Colloidal Silica) into the unsaturated medium is investigated by developing a mathematical model and conducting numerical simulations. The proposed model is verified by comparing experimentally and numerically determined hydraulic conductivities of gel-treated soil columns at different Colloidal Silica (CS) injection volumes. The numerical experiments indicate that an impermeable gel layer is formed within the time period twice the gel-point. At the Same normalized time, the CS solutions with lower NaCl concentrations result ill further migration and poor Performance in plugging the pore space.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.152-157
• /
• 2002

The cure and rheological behavior of Diglycidyl ether of bisphenol F, catalyzed by four kinds of imidazoles and a Nadic methyl anhydride curing agent were studied using a differential scanning calorimeter (DSC) and rheometer. The isothermal traces were employed to analyze cure reaction. The DGEBF/anhydride conversion profiles showed autocatalyzed reaction characterized by maximum conversion rate at 20~40 % of the reaction. The rate constants obtained from isothermal test showed temperature dependance, but reaction order did not. The order of reaction (m+n) was calculated to be close to 3. The measurements of viscosity and relation time in the presence of inorganic fillers were carried out at different isothermal curing temperatures. The viscosity and gelation time increased with filler content at the same isothermal temperature.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.500-505
• /
• 1985

A method to store concentrated milk in the liquid state at $-15^{\circ}C$ was developed, and quality changes during storage of milk were evaluated. Combined cryoprotectants (CCP) suitable for storing concentrated milk in the liquid state at $-15^{\circ}C$ were consisted of 17.74% sucrose, 8.87% glucose, 8.87% fructose, 2% glycerol, 0.25% sodium hexametaphosphate, 0.25% NaCl and 0.02% ascorbic acid. The amount of CCP to be added to concentrated milk to depress freezing point to $-15^{\circ}C$ was 38% by weight. Gelation due to protein denaturation was the most serious quality change during storage, which adversely affected appearance and utilization of the stored product. Gelation was observed after 3 weeks storage in the control, but it was not in milk with CCP throughout 18 weeks storage. Amount of protein precipitated increased in the control during storage, whereas there was no protein precipitated in milk with CCP. Surface color and peroxide value of the control and treatment did not change significantly during storage, and there were no marked differences between the control and treatment. These results indicated that quality of concentrated milk could be preserved, without gelation, by storing milk with CCP in the -liquid state at the frozen storage temperature. Besides, energy required for freezing preservation of milk could be significantly reduced by elimination of phase changes for freezing and thawing, and the stored product could be continuously processed for the final products without long waiting time for thawing.

• Elastomers and Composites
• /
• v.49 no.4
• /
• pp.323-329
• /
• 2014

In order to select polymer matrix for MIF (Molded-In Foaming) process, in this study, we investigated rheological properties of commercial polymers, SBC (Styrene-Butadiene Copolymers, K-resin KK38) and SBS (Styrene- Butadiene-Styrene, KTR 101 and KTR 301). In time sweep test, the rheological properties ($G^{\prime}$, $G^{{\prime}{\prime}}$, ${\eta}^*$) of SBS at 155 and $170^{\circ}C$ display almost constant value as a function of time from 0 s to 1800 s. On contrast, the rheological properties of SBS at 185 and $200^{\circ}C$ exponentially increase as a function of time. It could be due to gelation of SBS at high temperature conditions. These increment of rheological properties are not observed in SBC. From LAOS (large amplitude oscillatory shear) test, the nonlinear rheological properties of SBS at 155 and $200^{\circ}C$ after 1800 s are compared. The nonlinear rheological properties at $155^{\circ}C$ show simple strain thinning behavior such as linear homopolymer, however, the nonlinear rheological properties at $200^{\circ}C$ show 2 times strain thinning behavior (Payne effect). It well match with the gelation of SBS at $200^{\circ}C$. From rheological studies, it is confirmed that the proper polymer matrix for MIF process (low rheological properties at initial time and high rheological properties after process) is SBS KTR 301.

• The Korean Journal of Urological Oncology
• /
• 제15권3호
• /
• pp.178-186
• /
• 2017

Purpose: Poloxamer 407 (P407) thermo-sensitive hydrogel formulations were developed to enhance the retention time in the urinary bladder after intravesical instillation. Materials and Methods: P407 hydrogels (P407Gels) containing 0.2 w/w% fluorescein isothiocyanate dextran (FD, MW 4 kDa) as a fluorescent probe were prepared by the cold method with different concentrations of the polymer (20, 25, and 30 w/w%). The gel-forming capacities were characterized in terms of gelation temperature (G-Temp), gelation time (G-Time), and gel duration (G-Dur). Homogenous dispersion of the probe throughout the hydrogel was observed by using fluorescence microscopy. The in vitro bladder simulation model was established to evaluate the retention and drug release properties. P407Gels in the solution state were administered to nude mice via urinary instillation, and the in vivo retention behavior of P407Gels was visualized by using an in vivo imaging system (IVIS). Results: P407Gels showed a thermo-reversible phase transition at $4^{\circ}C$ (refrigerated; sol) and $37^{\circ}C$ (body temperature; gel). The G-Temp, G-Time, and G-Dur of FD-free P407Gels were approximately $10^{\circ}C-20^{\circ}C$, 12-30 seconds, and 12-35 hours, respectively, and were not altered by the addition of FD. Fluorescence imaging showed that FD was spread homogenously in the gelled P407 solution. In a bladder simulation model, even after repeated periodic filling-emptying cycles, the hydrogel formulation displayed excellent retention with continuous release of the probe over 8 hours. The FD release from P407Gels and the erosion of the gel, both of which followed zero-order kinetics, had a linear relationship ($r^2=0.988$). IVIS demonstrated that the intravesical retention time of P407Gels was over 4 hours, which was longer than that of the FD solution (<1 hour), even though periodic urination occurred in the mice. Conclusions: FD release from P407Gels was erosion-controlled. P407Gels represent a promising system to enhance intravesical retention with extended drug delivery.

• Fisheries and Aquatic Sciences
• /
• v.10 no.3
• /
• pp.103-112
• /
• 2007

High prices, overfishing, and contamination have limited the availability of natural caviar as a food product. We attempted to apply encapsulation by calcium-alginate gel membranes to caviar analog preparation in an effort to produce a high-quality replacement for natural caviar. Physical conditions of stirring speed $(X_1,\;rpm)$ and gelation time $(X_2,\;min)$ as the independent variables for gelation were optimized by response surface methodology. Sphericity $(Y_1,\;%)$, diameter $(Y_2,\;mm)$, membrane thickness $(Y_3,\;mm)$, rupture strength $(Y_4,\;g)$, and rupturing deformation $(Y_5,\;mm)$ were used as the dependent variables to compare characteristics of the capsules for caviar analogs with natural caviar. The values of the independent variables as evaluated by multiple response optimization were $X_1=-0.1271 (278 rpm) and $X_2=0.4436$ (12.2 min), respectively. Predicted values of the four dependent variables were $Y_1=97.7%,\;Y_2=2.97mm,\;Y_4=1,465g,\;and\;Y_5=1.15mm$. Membrane thickness $(Y_3)$ was eliminated from the dependent variables for multiple response optimization because it could not be measured with an image analyzer. The experimental values prepared under the optimal conditions for verification nearly coincided with the predicted values and satisfied the conditions of natural caviar.