• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.42-48
• /
• 2001

Chromium carbides have the excellent wear properties as transition metal carbides. Their tribological applications were studied recently. The nano-sized ceramic could enhance the mechanical and electronical properties of materials. In this study, it was observed to test the wear of the coated surface of nano-sized chromium carbides. The nano-sized chromium carbides were produced by sol-gel processing. Coating surface of produced powders was obtained front plasma spraying. Wear test of coating surface was held increasing temperature. The friction coefficient and the wear loss were testified in dry environment. And the worn surfaces were analyzed by XRD and SEM.

• 한국세라믹학회지
• /
• 제47권4호
• /
• pp.343-352
• /
• 2010

A zirconia gel/polymer hybrid nanofiber was produced in a nonwoven fabric mode by electrospinning a sol derived from hydrolysis of zirconium butoxide with a polyvinyl butyral. Results indicated that the hydroxyl groups on the vinyl alcohol units in the backbone of the polymer were involved in the hydrolysis as well as grafting the hydrolyzed zirconium butoxide. In addition, use of acetic acid as a catalyst resulted in further hydrolysis and condensation in the sol, which led to the growth of -Zr-O-Zr- networks among the polymer chains. These networks gradually transformed into a crystalline zirconia structure upon heating. The as-spun fiber was smooth but partially wrinkled on the surface. The average fiber diameter was $690{\pm}110\;nm$. The fiber exhibited a strong but broad blue photoluminescence with its maximum intensity at a wavelength of ~410 nm at room temperature. When the fiber was heat-treated at $400^{\circ}C$, the fiber diameter shrunk to $250{\pm}60\;nm$. Nanocrystals which belonged to a tetragonal zirconia phase and were ~5 nm in size appeared. A strong white photoluminescence was observed in this fiber. This suggests that oxygen or carbon defects associated with the formation of the nanocrystals play a role in generating the photoluminescence. Further heating to $800^{\circ}C$ resulted in a monoclinic phase beginning to form In the heat-treated fibers, coloring occurred but varied depending on the heating temperature. Crystallization, coloring, and phase transition to the monoclinic structure influenced the photoluminescence. At $600^{\circ}C$, the fiber appeared to be fully crystallized to a tetragonal zirconia phase.

• 대한화학회지
• /
• 제46권3호
• /
• pp.242-251
• /
• 2002

졸-겔 형판 합성법을 이용하여 페로브스카이트 구조를 갖는 나노튜브를 합성하고 그 특성을 조사하였다. PbTiO3(PT), PbZrO3(PZ)와 PbZrO3-PbTiO3(PZT)고용체 나노튜부는 반응물, Ti(OPri)4, Zr(OBu)3와 Pb(OAc)2-3H2O 들의 킬레이트 졸-겔 합성법에 의해서 합성하였다. 산화 알루미늄 형판은 200nm의 직경을 갖는 훠트만 아노디스크가 사용되었다. 6.0M-NaOH 용액에서 형판을 제거한 다음, 주사현미경 분석에 의해서 50m 길이와 200nm 외곽 직경의 생성물 나노튜브를 확인할 수 있었다. 투과현미경 분석과 전자회절 분석에 의하여 나노튜브가 다결정임을 확인하였다. DSC 분석에 의하여 PT 나노튜브의 상전이 온도는 특이하게도 234.4$^{\circ}C$ 임이 확인되었으며, 이때의 입자크기는 X-선 분석의 하나인 Scherrer 식에 의해서 15.4nm 임이 계산되었다.

• 대한전기학회논문지
• /
• 제41권5호
• /
• pp.525-532
• /
• 1992

Fluorine-doped YBaS12TCuS13TOS17-xTFS1yT superconducting materials with y varing two orders of magnitude form 0.02 to 2.0 have been prepared by a sol-gel process by using metal nitrate salts, sodium hydroxide and sodium fluoride. Fluorine contents have been measured using an ion-selective electrode. All fluorine doped as reactant were found to be present in the resulted samples. From the observation of XRD it has been concluded that the samples with y 0.2 formed simply the single phase of perovskite structure, whereas those with y 0.5 yielded together some compounds such as BaFS12T, YFS13T and CuO in the resulted samples. The observation of solid state S019TF NMR has been carried out in order to check whether fluorine was actually incorporated into the lattice sites, and the experimental results revealed that the mole ratio of fluorine incorporated into the lattice sites of YBaS12TCuS13TOS17-xT was approximately 0.2 per mole of the compound. Also electrical resistivity measurement indicated that onset transition temperature has the tendency to increase slightly with increasing y in the dilute region as y 0.2.

• 한국식품과학회지
• /
• 제24권5호
• /
• pp.463-469
• /
• 1992

열공정이 생선단백질의 조직 형성에 미치는 영향을 단백질 sol의 열안정성과 가열시의 rigidity 형성 및 최종 겔의 구조적인 측면으로 살펴보았다. 가열하는 동안에 나타나는 변성 피크는 소금첨가에 따라서, 가열속도에 따라서 또한 낮은 온도에서의 전처리에 따라 변성온도가 사라지거나 낮은 쪽으로 이동하였고 단백질의 열용량도 줄어들고 불안정한 상태로 변하였다. $4^{\circ}C$에서의 전처리는 가열시 조직의 굳기형성에 지속적인 상승효과를 가져왔고 많은 탄성력의 증가를 가져왔으나, $40^{\circ}C$에서의 전처리는 일시적으로 조직강도의 증가만 가져왔다. 그러나 낮은 온도($4^{\circ}C$ 나 $40^{\circ}C$)에서의 전처리 후 생성되는 겔 내부조직은 큰 집성물이 보이는 구조적 유사성을 보였으며, SH기를 변형시킨 겔의 구조도 조직의 강도변화를 나타내는 특징을 나타내었다.

• 한국식품과학회지
• /
• 제24권1호
• /
• pp.54-58
• /
• 1992

국내 시판용 옥수수 전분을 시료로 하여 그 호화액의 전분농도와 측정온도에 따른 리올로지 특성을 조사하였다. $4{\sim}9%$ 옥수수 전분 호화액의 리올로지 거동은 Herschel-Bulkley 식에 적합하였고, 항복응력을 갖는 의가소성 유체의 특성을 나타내었다. 전분농도의 증가로 의가소성은 증가하였으나 의가소성의 온도의존성은 보이지 않았고, 겉보기 점도와 항복응력은 모두 지수함수적인 농도 및 온도의존성을 나타내었다. 이들 농도 및 온도에 따른 유동특성을 해석한 결과, 옥수수 면분 호화액에서 졸-겔 전이와 같은 구조적 변화를 일으키는 농도 및 항복응력을 나타내기 시작하는 농도는 각각 $6.22{\sim}6.52%$ 및 $2.6{\sim}6.52%$이었다.

• 한국축산식품학회지
• /
• 제18권3호
• /
• pp.209-215
• /
• 1998

Effects of protein concentration, ionic strength, pH, and temperature range on the heat-induced denaturation of salt soluble protein extracted from spent layer meat were investigated. Viscosity of salt soluble protein heated at 65$^{\circ}C$ for 30 min began to increase sharply above 7 mg/ml of breast protein concentration, and above 21 mg/ml of leg protein concentration, respectively. Both turbidity and viscosity showed the highest value in cooked protein solution with pH 6.0 and 1% NaCl. The turbidity of salt soluble protein started to increase continuously from 40$^{\circ}C$ to 80$^{\circ}C$. The viscosity increased rapidly from 45$^{\circ}C$ to 60$^{\circ}C$ in breast protein, and increased from 50$^{\circ}C$ to 55$^{\circ}C$ in leg protein, respectively, and then kept relatively constant. Breast protein had higher viscosity than leg protein during heat-induced gelation. Therefore, salt soluble protein from spent layer meat was associated with denatured protein (turbidity change) prior to gelation (viscosity change) during heating. Breast protein showed lower thermal transition temperature, and better gel formation than leg protein during heating.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.5-6
• /
• 2006

Using the $(Ba_{0.5}Sr_{0.5}){TiO_3}$(BST) powders prepared by the Sol-Gel method, the EST thick films were fabricated on the ${Al_2}{O_3}$ substrates coated with Pt by the screen printing method. Compared with pure EST thick films, the structural and dielectric properties of the EST thick films doped with 1${\sim}$10 wt % MgO were investigated. It was observed that the Mg substitution into EST causes a shift in the cubic-tetragonal EST phase transition peak to a lower temperature. The microstructure of the EST substituted with Mg was homogeneous and dense. Mg substitution into EST had a significant effect on the grain size reduction. Dielectric constant was decreased with increasing the MgO content and temperature. In the case of EST thick films doped with 1 wt% MgO, the relative permittivity and dielectric loss were 158] and 1.4 % at 1 MHz.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.603-608
• /
• 2019

In this study, the multilayered thin films of (Ba,Sr)TiO3/K(Ta,Nb)O3 were fabricated by the sol-gel and spin coating methods, and their structural and electrical properties were investigated. The specimen showed polycrystalline X-ray diffraction (XRD) characteristics with a tetragonal structure. The average grain size and film thickness for one coating were about 30~40nm and 60nm, respectively. The phase transition temperature of specimen was lower than 10 ℃. The dielectric constant and loss at 20 ℃ of the specimen coated six times were 1,231 and 0.69, respectively. The rate of change in dielectric constant at an applied direct current (DC) voltage of the six times coated thin films was 17.3%/V. The electrocaloric effect was the highest around the temperature at which the remanent polarization rapidly changed. When an electric field of 660kV/cm was applied to the triply coated thin films, the highest electrocaloric property of 4.41 ℃ was observed.

• Elastomers and Composites
• /
• 제57권3호
• /
• pp.100-106
• /
• 2022

Waterborne polyurethane-acrylate(WPUA) dispersions were prepared by surfactant-free emulsion polymerization in a two-step process. In the first step, polytetrahydrofuran, isophorone diisocyanate, dimethylol proponic acid, and 2-hydroxyethyl methacrylate were used to synthesize a vinyl-terminated polyurethane prepolymer. In the second step, styrene, methyl methacrylate, butyl acrylate, and different multi-functional crosslinkers were copolymerized. 1,6-hexanediol diacrylate, trimethylolpropane triacrylate, and pentaerythritol tetraacrylate were used as the crosslinkers, and their effect on the mechanical and thermal properties of WPUA was investigated. Overall, as the number of functional groups of the cross-linker increased, the gel fraction improved to 79.26%, the particle size increased from 75.9 nm to 148.7 nm, and the tensile strength was improved from 5.86 MPa to 12.40 MPa. In thermal properties, the glass transition temperature and decomposition temperature increased by 9.9℃ and 18℃, respectively. The chemical structures of the WPUA dispersions were characterized by Fourier-transform infrared spectroscopy. The synthesized WPUA has high potential for applications such as coatings, leather coatings, adhesives, and wood finishing.