• 생체재료학회지
• /
• 제22권4호
• /
• pp.249-258
• /
• 2018

Background: Mucoadhesive polymers, which may increase the contact time between the polymer and the tissue, have been widely investigated for pharmaceutical formulations. In this study, we developed a new polysaccharide-based mucoadhesive polymer with thermogelling properties. Methods: Hexanoyl glycol chitosan (HGC), a new thermogelling polymer, was synthesized by the chemical modification of glycol chitosan using hexanoic anhydride. The HGC was further modified to include thiol groups to improve the mucoadhesive property of thermogelling HGC. The degree of thiolation of the thiolated HGCs (SH-HGCs) was controlled in the range of 5-10% by adjusting the feed molar ratio. The structure of the chemically modified polymers was characterized by $^1H$ NMR and ATR-FTIR. The sol-gel transition, mucoadhesiveness, and biocompatibility of the polymers were determined by a tube inverting method, rheological measurements, and in vitro cytotoxicity tests, respectively. Results: The aqueous solution (4 wt%) of HGC with approximately 33% substitution showed a sol-gel transition temperature of approximately $41^{\circ}C$. SH-HGCs demonstrated lower sol-gel transition temperatures ($34{\pm}1$ and $31{\pm}1^{\circ}C$) compared to that of HGC due to the introduction of thiol groups. Rheological studies of aqueous mixture solutions of SH-HGCs and mucin showed that SH-HGCs had stronger mucoadhesiveness than HGC due to the interaction between the thiol groups of SH-HGCs and mucin. Additionally, we confirmed that the thermogelling properties might improve the mucoadhesive force of polymers. Several in vitro cytotoxicity tests showed that SH-HGCs showed little toxicity at concentrations of 0.1-1.0 wt%, indicating good biocompatibility of the polymers. Conclusions: The resultant thiolated hexanoyl glycol chitosans may play a crucial role in mucoadhesive applications in biomedical areas.

• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.518-524
• /
• 1998

Liposomes have been widely employed as biomembrane-mimetic system and drug-delivery system. In these applications, the low stability of liposomes has been the most serious problem. They have relatively short half-lives and easily lysed through interactions with biological components. This study was performed to investigate the effects of godulbaegi extracts on the fludity of phospholipid liposomes. We used dipalmitoyl phosphatidylcholine(DPPC) liposomes which make most stable liposomes among the other phosphatidylcholines. The thermograms of the DPPC liposomal bilayers incorporated with the hexane extract of godulbaegi(Ixeris sonchifolia H.) were obtained, and the enthalpy changes and the sizes of cooperative unit of the transition were calculated. The incorporation of the Ixeris sonchifolia H. into the liposomal bilayers effectively reduced the transition temperature at which the transition from gel state to liquid-crystalline state occurs, broadened the thermogram peaks, and reduced the ratio of van't Hoff to calorimetric enthalpies. These results indicate indicate that the godulbaegi extracts (Ixeris sonchifolia H.) have significant effects on the fluidity of biological membrance.

• 펄프종이기술
• /
• 제34권1호
• /
• pp.22-29
• /
• 2002

The coated paper was greatly affected by the basic physical properties of the binder as well as the amount of the coating formula. High glass transition temperature (Tg) of the styrene-butadiene (SB) latex, selected as the binder in our study, gave the high stiffness to the coated paper, but lowered the binding force and print gloss. The average particle size of the SB latex also greatly affected to the coated paper so that the smaller particle size improved the rheological property of the coating formula and increased the binding force and print gloss. Another property of the SBR latex, gel content, was important because when its value was small, the latex was easily deformed at the high temperature and increased air permeability to the coated paper. Therefore, the lower gel content consequently resulted in the higher blistering resistance, especially in the web paper. The larger portion of the SB latex in the coated formula improved the binding force and print gloss, but decreased the ink set-off and ink-trapping to the coated paper. The heavier coating improved optical properties such as opacity, paper gloss and paper smoothness, to the coated paper.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.128-128
• /
• 2003

Electrochromism (EC) is defined as a phenomenon in which a change in color takes place in the presence of an applied voltage. Because of their low power consumption, high coloration efficiency, EC devices have a variety of potential applications in smart windows, mirror, and optical switching devices. An EC devices generally consist of a transparent conducting layer, electrochromic cathodic and anodic coloring materials and an ion conducting electrolyte. EC has been widely studied in transition metal oxides(e.g., WO$_3$, NiO, V$_2$O$\sub$5/) Among these materials, WO$_3$ is a most interesting material for cathodic coloration materials due to its lush coloration efficiency (CE), large dynamic range, cyclic reversibility, and low cost material. WO$_3$ films have been prepared by a variety of methods including vacuum evaporation, chemical vapor deposition, electrodeposition process, sol-gel synthesis, sputtering, and laser ablation. Sol-gel process is widely used for oxide film at low temperature in atmosphere and requires lower capital investment to deposit large area coating compared to vacuum deposition process.

• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.804-812
• /
• 1994

Stable PZT coating sol was prepared using chelating agent, ethylacetoacetate(EAcAc) by sol-gel processing under ambient atmosphere. Through FT-IR spectrum analysis on solution of each reaction step, formation of metal complex was confirmed and prepared PZT sol was stable over several months. Through TG-DTA, XRD, FT-IR spetrum analysis of PZT gel powder, it was understood that the addition of EAcAc could reduce the transition temperature to ferroelectric phase, due to the increased homogeneity by matching the hydrolysis and condensation rates by chelation. Single perovskite phase was obtained by the heat-treatment at 54$0^{\circ}C$ for 30 min. The film was coated on ITO-coated glass substrate by dip coating method. After heat-treatment, PZT thin film had thickness in the range of 20~130 nm. The maximum dielectric constant of its thin film at room temperature and 1 kHz was 128.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.783-792
• /
• 1995

Sol-Gel derived ferroelectric PZT thin films were fabricated on ITO/Glass and Si/SiO2 substrates. In order to investigate the effect of catalysts on the densification and crystallization of PZT thin films, a nitric acid or ammonium hydroxide was added to the PZT stock solution at the state of partial hydrolysis reaction. The measured pH for a stable PZT sol was 5.2~9.3. In case of an acid-catalyzed PZT sol, a highly condensed particulate PZT sol was formed by accelerating the hydrolysis reaction. But weakly branched polymeric PZT sol was formed with a base-catalyzed condition. The difference in densification behavior was not found in the pH range of added catalyst, but the refractive index of PZT thin film was increased rapidly as the annealing temperature increased. The PZT thin film annealed at 54$0^{\circ}C$ for 10 min was fully densified and its refractive index was above 2.4. When the annealing temperature increased, the transition from the pyrochlore phase to perovskite appeared at 54$0^{\circ}C$. The base-catalyzed PZT thin film suppressed to form the pyrochlore phase and proceeded effectively to convert the perovskite phase. This was due to the formation of polymeric molecular structure by controlling the hydrolysis and condensation reaction through the additiion of the ammonium hydroxide.

• 한국응용과학기술학회지
• /
• 제16권4호
• /
• pp.317-322
• /
• 1999

Transparent films were prepared using the sol-gel process by mixing TEOS with PVA solution that was solved in EtOH and distilled water homogeneously. HCl, $CH_3COOH$ and $NH_4OH$ were used as catalysts of the sol-gel process, and for improving the flexibility of films glycerol was used as plasticizer. In case of each catalyst, transparency and tensile strength were increased, and glass transition temperature (Tg) was shifted to higher temperature with increasing TEOS ratio. Also, in case of adding the plasticizer, the flexibility of films was increased. On the contrary, transparency, thermal stability and tensile strength were decreased with increasing HCl and $NH_4OH$ ratio. Also, the range of being made of film type was expanded when $CH_3COOH$ was used than HCl and $NH_4OH$.

• 한국식품영양학회지
• /
• 제10권2호
• /
• pp.234-240
• /
• 1997

식품산업을 포함한 다양한 분야에서 이용되고 있는 한천의 용도를 개발하기 위하여 각종 물리적인 처리가 한천의 열적 특성에 미치는 영향과 각 처리에 다른 표면구조의 변화를 조사하였다. 시차주사 열량분석기를 이용하여 w사한 일반한천의 흡열개시온도(To), 최대흡열점의 온도(Tp) 및 흡열완료온도(Te)는 81.20, 95.51 및 $112.14^{\circ}C$였으며, 분무건조한천은 60.11, 76.45 및 $89.54^{\circ}C$였고, 압출성형한천은 41.30, 61.72 및 $80.50^{\circ}C$로 압출성형한천이 가장 낮은 온도에서 진행되었다. 또한 엔탈피도 일반한천 3.22cal/g, 분무\ulcorner한천 1.53cal/g, 압출성형한천 0.73cal/g의 순서로 압출성형한천에서 가장 낮았다. 완전히 가열용해한 각 한천을 다시 냉각, 응고 후에 다시 승온하였을 때의 To, Tp 및 Te는 일반한천 80.70, 95.61 및 $110.92^{\circ}C$, 붐무건조한천 79.54, 93.76 및 $109.84^{\circ}C$, 압출성형한천 79.25, 93.19 및 $108.77^{\circ}C$로 한천의 종류에 따른 차이는 없었다. 엔탈피 역시 큰 차이를 보이지 않았다. 광학현미경과 주사전자현미경에 의해 표면구조를 관찰한 결과, 일반한천의 경우 단단한 구조로 균열이나 기공들이 관찰되지 않았고, 분무건조한천은 많은 미세입자들이 다량으로 느슨하게 붙어있는 다공질구조로 외부에 노출되는 표면적이 넓었으며, 압출성형한천은 굴곡, 요철 및 균열이 생겨서 수분침투가 용이한 구조를 이루고 있었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권3호
• /
• pp.146-152
• /
• 2009

Traditional surgical method or injection using filler is performed for soft tissue augmentation. Surgical methods have disadvantage of surgical morbidity. Commercially available injectable materials have the disadvantages such as resorption, short-term effect. repeated application and hypersensitivity. Significant shortcoming of cell therapy using autologous fibroblasts is delay of treatment effect. Chitosan/${\beta}$-glycerol phosphate (GP) solution has thermosensitive property and allows sol-gel transition at physiologic pH and temperature. These properties may resolve the delay of treatment effect. The purposes of this study are to evaluate the viscosity and pH changes of chitosan/${\beta}$-GP solutions and to evaluate the effect of chitosan/${\beta}$-GP solution on fibroblast proliferation and production of collagen. We measured the viscosity and pH as function of temperature, of the solution containing 1:0.7, 1:0.75, 1:0.8 chitosan (1, 10, 100, 700 kDa) /${\beta}$-GP. Fibroblasts from ears of 5 rats were cultured in chitosan/${\beta}$-GP solutions for 3 weeks. Cell proliferation and collagen contents were measured every week with WST (water-soluble tetrazolium salt) assay and Collagen assay respectively. The Results are 1) Chitosan(100 kDa<)/${\beta}$-GP solution (1:0.75) showed sol-gel transition at physiologic pH and body temperature and injectable properties. It will enable to resolve the delay in treatment effect 2) Cell proliferation and total collagen contents of the control group were increased with time. However, these decreased after the 1st week in experimental group 3) Collagen contents in the experimental group are higher than that of control group. Chitosan/${\beta}$-GP solution may provide favorable conditions for cell function

• 한국진공학회지
• /
• 제22권4호
• /
• pp.193-197
• /
• 2013

본 연구에서는 sol-gel법을 이용해 제작된 $VO_2$ 박막의 광전변환 특성을 연구하기 위해 광 조사 유무에 의해 생성되는 전류를 bias voltage에 따라 온도별로 측정하였다. 그 결과, 광 조사 유무에 따라 박막에서 생성되는 전류가 변화되는 것을 알 수 있었으며, bias voltage가 증가할수록 전류가 일정하게 늘어나는 것을 알 수 있었다. 특히, 광에 의해 생성되는 전류는 $VO_2$에서의 MIT 온도보다 낮은 $50^{\circ}C$에서 최대였다. 이러한 결과는 $VO_2$에서 photo-voltaic 효과가 발생함을 의미하며, 따라서 $VO_2$ 박막을 광전변환 소자로 응용할 수 있을 것으로 기대된다.