• Journal of Pharmaceutical Investigation
• /
• v.31 no.1
• /
• pp.13-18
• /
• 2001

This study was to investigate the relationship between the gel layer thickness and swelling boundary via strength measurements using texture analysis. The novel texture analysis approach was used to examine the dynamics of swelling behavior in a ternary polymeric matrix tablet. The method permitted the characterization of the changes occurring at the peripheral as well as within interior boundary of the swelling during water ingress. The increase in gel strength for pectin, HPMC, and a ternary mixture with gelatin was found to depend on polymer concentration. Therefore, this method is further applicable to characterize the swelling behavior and provide opportunity to differentiate the gel-layer from that of swelling boundary.

• Membrane and Water Treatment
• /
• v.8 no.6
• /
• pp.543-551
• /
• 2017

Membrane fouling in membrane bioreactor (MBR) remains a primary challenge for its wider application. The focus of this study to investigate the influence of iron distribution in activated sludge on gel layer fouling in MBR. Significant reduction in the transmembrane pressure (TMP) rise rates was observed in the presence of iron as result of retarding the gel layer formation time. The spatial distribution of iron had a significant impact on the stratification structure of extracellular polymeric substances (EPS) fractions, such as proteins (PN) and polysaccharides (PS). A mitigation of PN or PS from the supernatant to the EPS inner layers was observed in the presence of iron. Compared with the control reactor, the reduction in PN and PS of the supernatant and lower PN/PS rates of the LB-EPS were beneficial to decrease the membrane fouling potential during the gel layer formation. Consequently, the iron addition managed to control gel layer fouling could be a useful strategy in MBR.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.4
• /
• pp.339-345
• /
• 1995

For the effective treatment of aphthous stomatitis, the matrix type mucoadhesive patches containing triamcinolone acetonide have been formulated. The drug layer was obtained by drying the polymer gel which was prepared with carbomer 934P, ammoniomethacrylate copolymer, titanium dioxide and polyethylene glycol 400. The effects of the content of additives on physical characteristics of the polymer gel and the drug layer were evaluated. The addition of carbomer increased the yield point and the zero-shear viscosity of polymer gel as well as the thickness, the water absorption ratio, the adhesive time and $T_{50%}$ of drug layer. The adhesive time and the water absorption ratio of drug layer were also improved by the addition of ammoniomethacrylate copolymer, but the addition of titanium dioxide had decreased the zero-shear viscosity of polymer gel and the adhesive time of drug layer.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.40-44
• /
• 2019

Experimental studies have been carried out to investigate characteristics of gas explosion using a multi layered water gel barrier in a vented explosion chamber. The chamber is consisted of 1600 mm in length, with a square cross-section of $100{\times}100mm^2$. The gel concentration of inner layer of MLWGB ranged from 10% to 90% with intervals of 10% by weight of gel. Displacement of the MLWGB was photographed with a measured using a high-speed video camera, and pressure development was measured using a data acquisition system. It was found that MLWGBs with 10 ~ 20% inner layer concentrations were ruptured during the explosions. As the concentrations of inner layer increased from 30% to 90%, the barriers were not ruptured. As the gel concentrations of the inner layer increased, the displacement increased toward the chamber exit and the pressure decreased for the ruptured barriers. It was found that the pressure attenuation obtained from the MLWGB was higher than that of the single water gel barrier. For the cases of non-ruptured barriers, the pressure inside the chamber less increased with increasing gel concentrations of the inner layer. It was also found that the displacement moved back into the chamber for non-ruptured MLWGBs, and it was sensitive to the gel concentrations.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.158-160
• /
• 2003

We have reported to make nanostructured cobalt oxide electrode that have large capacitance over than 400 F/g (specific capacitance) and good cycleability. But, it had serious demerits of low voltage range under 0.5 V and low power density. Therefore, we need to increase voltage range of cobalt oxide electrode. We report here on the electrochemical properties of sol-gel-derived nanoparticulate cobalt xerogel in 1M KOH solution and aqueous polymeric gel electrolyte. In solution electrolyte, cobalt oxide electrode had over 250 F/g capacitance consisted of EDLC and pseudocapacitance. In gel electrolyte, cobalt oxide electrode had around 100 F/g capacitance. This capacitance was only electric double layer capacitance of active surface area. In solution electrolyte, potassium ion as working ion reacted with both of layers easily. However, In gel electrolyte, reacted with only surface-active layer. Itis very hard to reach resistive layer. So, we have studied on pretreatment of electrode to contain working ions easily. We'll report more details.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.10
• /
• pp.3629-3633
• /
• 2011

The effect of a dense $TiO_2$ blocking layer prepared using the sol-gel method on the performance of dye-sensitized solar cells was studied. The blocking layer formed directly on the working electrode, separated it from the electrolyte, and prevented the back transfer of electrons from the electrode to the electrolyte. The dyesensitized solar cells were prepared with a working electrode of fluorine-doped tin oxide glass coated with a blocking layer of dense $TiO_2$, a dye-attached mesoporous $TiO_2$ film, and a nano-gel electrolyte, and a counter electrode of Pt-deposited FTO glass. The gel processing conditions and heat treatment temperature for blocking layer formation affected the morphology and performance of the cells, and their optimal values were determined. The introduction of the blocking layer increased the conversion efficiency of the cell by 7.37% for the cell without a blocking layer to 8.55% for the cell with a dense $TiO_2$ blocking layer, under standard illumination conditions. The short-circuit current density ($J_{sc}$) and open-circuit voltage ($V_{oc}$) also were increased by the addition of a dense $TiO_2$ blocking layer.

• Journal of Sensor Science and Technology
• /
• v.29 no.6
• /
• pp.420-426
• /
• 2020

A metal oxide semiconductor gas sensor is operated by measuring the changes in resistance that occur on the surface of nanostructures for gas detection. ZnO, which is an n-type metal oxide semiconductor, is widely used as a gas sensor material owing to its high sensitivity. Various ZnO nanostructures in gas sensors have been studied with the aim of improving surface reactions. In the present study, the sol-gel and vapor phase growth techniques were used to fabricate nanostructures to improve the sensitivity, response, and recovery rate for gas sensing. The sol-gel method was used to synthesize SnO₂ nanoparticles, which were used as the seed layer. The nanoparticles size was controlled by regulating the process parameters of the solution, such as the pH of the solution, the type and amount of solvent. As a result, the SnO₂ seed layer suppressed the aggregation of the nanostructures, thereby interrupting gas diffusion. The ZnO nanostructures with a sol-gel processed SnO₂ seed layer had larger specific surface area and high sensitivity. The gas response and recovery rate were 1-7 min faster than the gas sensor without the sol-gel process. The gas response increased 4-24 times compared to that of the gas sensor without the sol-gel method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.468-473
• /
• 1998

Sol-gel법을 이용하여 PbTiO3에 La을 10mol% 도핑한 박막을 bare Si(100)-wafer 위에 스핀 코팅법을 이용하여 제조하였다. 제조된 박막의 열처리 온도에 따른 결정화 거동을 살펴보고, 씨앗층(seeding layer)을 도입하여 박막의 미세구조 및 배향성을 SEM과 XRD로 관찰하였다. 씨앗층없이 일반적으로 제조된 박막의 경우는 우선 배향성을 나타내지 않았으나, 씨앗층을 도입한 경우에는 씨앗층의 두께 및 열처리 시간에 따라 막의 배향성이 달라졌다.

• Corrosion Science and Technology
• /
• v.20 no.4
• /
• pp.175-182
• /
• 2021

Magnesium alloy is limited in the industrial field because its standard electrode potential is -2.363 V vs. NHE (Normal Hydrogen Electrode) at 25 ℃. This high electrochemical activity causes magnesium to quickly corrode with oxygen in air; chemical conversion coating prevents corrosion but causes surface defects like cracks and pores. We have examined the anti-corrosion effect of sol-gel coating sealed on the defected conversion coating layer. Sol-gel coatings produced higher voltage current and smaller pore than the chemical conversion coating layer. The conversion coating on magnesium alloy AZ31 was prepared using phosphate-permanganate solution. The sol-gel coating was designed using trimethoxymethylsilane (MTMS) and (3-Glycidyloxypropyl) trimethoxysilane (GPTMS) as precursors, and aluminum acetylacetonate as a ring-opening agent. The thermal shock resistance was tested by exposing specimens at 140 ℃ in a convection oven; the results showed changes in the magnesium alloy AZ31 surface, such as oxidization and cracking. Scanning electron microscope (FE-SEM) analysis confirmed a sealed sol-gel coating layer on magnesium alloy AZ31. Electrochemical impedance spectroscopy (EIS) measured the differences in corrosion protection properties by sol-gel and conversion coatings in 0.35 wt% NaCl solution, and the potentiodynamic polarization test and confirmed conversion coating with the sol-gel coating show significantly improved resistance by crack sealing.

• Archives of Plastic Surgery
• /
• v.32 no.3
• /
• pp.357-362
• /
• 2005

The aim of this study is to elucidate the effect of keratinase on epidermis of rat skin. Twenty-five male Sprague-Dolly rats were used. The hair on the back were removed and $2{\times}2cm$ area was marked. The rats were divided five groups; 1) Control group(Co), 2) Cleansing gel group(Cl), 3) Cleansing gel+keratinase group, 4) Exfoliant gel group(Ex), and 5) Exfoliant gel+ keratinase group(Ex+K). The solutions were applied to the back area twice a day for five days. On fifth day, the skins were harvested, fixed and prepared for histologic sections. The thickness of keratin layer, living epidermis, dermis, and cell layer number of living epidermis were measured. In the group containing keratinase(Cl+K, Ex+K), the thickness of keratin layer and living layer were thinner than other groups. However, there were no significant differences of the cell layer number of living epidermis and thickness of the dermis among the five groups. We think the keratinase may have the effect thinning the keratin layer as well as the thickness of living epidermis, without effecting the living cell and dermal component. The keratinase containing soap may be of benefit to remove the excess keratin layers in human.