• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.492-496
• /
• 1992

In order to compare the quality of canned pork products which are called collectively as luncheon meat, residual nitrite, sodium, collagen, total heme pigments and chemical composition were analyzed in 12 products of 8 companies from 4 countries. Also, the proteins of products were compared with that of pork by SDS-PAGE analysis. The level of residual nitrite was low in all the products and sodium levels were similar except in one or two products. As for collagen and total heme pigments content, among imported products luncheon meats were different from chopped meat products while domestic products were similar regardless of label distinction. Collagen contents of domestic products were similar to those of imports but total heme pigments contents were much higher Densitometer scans of gel electrophoretograms of chopped meat were more similar to that of pork than those of luncheon meat. In terms of chemical composition, luncheon meat had more carbohydrate regardless of whether they are domestics or imports. The quality of domestic luncheon meat appears to be the composite of those of imported luncheon meat and chopped meat. Accordingly, the quality standard for luncheon meat as a cheap product should be established in Korea to enable the domestic products to have a competitive power in price.

• Applied Biological Chemistry
• /
• v.34 no.3
• /
• pp.258-261
• /
• 1991

In order to establish the optimum drying temperature of the heated air blast-grain circulation dryer, a 2 ton scale of paddy was used in this experiment. The temperatures of heated air used were 45, 50, 55, 60, 65 and $70^{\circ}C$. Moisture content of the paddy was reduced to 15% from 24% by drying. The higher air temperature, the shorter drying time and the less fuel consumed. The portion of cracked kernels was found to be low as $3{\sim}10%\;at\;40{\sim}55^{\circ}C$, but was very high to $28{\sim}30%\;at\;60{\sim}70^{\circ}C$. The germination percent was very high as 98 and 93% at 40 and $45^{\circ}C$, but it was decreased to 86 and 30% at 50 and $70^{\circ}C$, respectively. The recovery yield of milled rice from paddy was decreased by 1.76, 2.63 and 7.52% at 60, 65 and $70^{\circ}C$, respectively, compared with 75.86% as drying at $40^{\circ}C$. The higher heated air temperature, the less head rice of milled rice was recovered, and the decreased ratio was increased $60^{\circ}C$. The higher heated air temperature, the less alkali disintergation value and gel consistency of milled rice and the more water up take, expanded vlume, total solid in residual liquid and intensity of starch iodine blue value of residual liquid, and those tendency was found clear from $60^{\circ}C$ temperature of heated air.

• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.337-344
• /
• 1996

Gel-type yogurt was prepared from egg white powder (EWP), casein and glucose. The effects of EWP on acid production and growth of Lactobacillus were studied. The effect of EWP on sensory properties and volatile aroma compounds were also studied. Acid production by Lactobacillus in EWP (1-3%, W/V) was significantly lower than that by Lactobacillus in milk (control). However, the increase of EWP content from 1 to 3% increased acid production significantly, Number of viable cells of L. acidophilus at 24 hrs in milk and EWP containing samples (1-3%) was $3.1{\times}10^4/ml\;and\8.3{\times}10^7-3.6{\times}10^2/ml.$ respectively Sample containing lower amount of EWP generally showed lower number of viable cells. Sensory property of EWP samples (1-3%) was showed lower than that of milk yogurt (reference). However, sensory property of samples containing EWP 2% or 3% was significantly better than that of sample containing EWP 1%. Though the composition of volatile aroma compounds was slightly different from sample to sample, gas chromatographic analysis detected acetone, ethanol, diacetyl and acetoin in samples fermented by L. acidophilus.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.363-370
• /
• 2016

Lightweight geopolymers are more readily produced and give higher fire resistant performance than foam cement concrete. Lowering the density of solid geopolymers can be achieved by inducing chemical reactions that entrain gases to foam the geopolymer structure. This paper reports on the effects of adding different concentrations of aluminum powder on the properties of cellular structured geopolymers. The apparent density of lightweight geopolymers has a range from 0.7 to $1.2g/m^3$ with 0.025, 0.05 and 0.10 wt% of a foaming agent concentration, which corresponds to about 37~60 % of the apparent density, $1.96g/cm^3$, of solid geopolymers. The compressive strength of cellular structured geopolymers decreased to 6~18 % of the compressive strength, 45 MPa of solid geopolymers. The microstructure of geopolymers gel was equivalent for both solid and cellular structured geopolymers. The workability of geopolymers with polyprophylene fibers needs to be improved as in fiber-reinforced cement concrete. The lightweight geopolymers could be used as indoor wall tile or board due to fire resistance and incombustibility of geopolymers.

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.39-45
• /
• 2013

Melt grafting of citraconic acid (CCA) onto an ethylene-propylene-diene terpolymer (EPDM) with various peroxide initiators was performed using a Haake Rheocorder. Finding the optimum running condition and concentration is critical for effective grafting and performance of grafted material. Therefore, this study focused on the effects of mixing (reaction) condition and monomer/initiator dosages on the grafting degree, grafting efficiency and crosslinking degree (gel content), melt flow index and mechanical properties of CCA-g-EPDM. As the grafting degree/crosslinking degrees increased, the tensile strength increased significantly, but elongation at break and melt flow index decreased. The initiator 2,5-dimethyl-2,5-di(tert-butyl peroxy)-hexane (T-101) appeared to meet for the best grafting(2.31%). The grafting degree increased markedly with increasing monomer CCA/initiator T-101 contents. The grafting degree also increased with increasing mixing temperature/time, and then leveled off or decreased/increased a little. The optimum monomer/initiator dosages and reaction temperature/time were found to be about 5/0.05 wt% and $180^{\circ}C$/15min, respectively.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.525-530
• /
• 2012

In this study, silane-crosslinked organic/inorganic composite membranes were prepared by simultaneous irradiation grafting of binary monomer mixtures (styrene and 3-(trimethoxysilyl)propyl methacrylate (TMSPM)) with various compositions onto a poly(ethylene-alt-tetraethylene) (ETFE) film and followed by sol-gel processing and sulfonation to provide a silane-crosslinked structure and a proton conducting ability, respectively. The Fourier transform infrared spectroscopy (FTIR) and thermo gravimetric analysis (TGA) were utilized to confirm the crosslinking of ETFE-g-PS/PTMSPM films. The prepared membranes with similar ion exchange capacity but a different TMSPM content were selected and their membrane properties were compared. The ETFE-g-PSSA/PTMSPM membranes were characterized by water uptake, dimensional stability, and proton conductivity after sulfonation. The membrane electrode assemblies (MEA) of the prepared membranes were fabricated and their single cell performances were measured.

• Journal of Life Science
• /
• v.22 no.9
• /
• pp.1166-1172
• /
• 2012

To investigate potential medicinal or functional uses of Eriobotrya japonica, this study focused on the isolation and identification of antioxidant compounds from Eriobotrya japonica leaves. Various solvents were extracted from the leaves, and their scavenging effect on 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals was measured, in addition to their superoxide dismutase-like activity, polyphenol compounds, and flavonoid content. Ethyl acetate extract exhibited the strongest scavenging effect in a 0.2 mM solution of DPPH ($63.24{\pm}2.20%$, $81.83{\pm}2.10%$, and $93.15{\pm}2.31%$ in 0.3, 0.7, and 1.0 mg/ml sample concentrations, respectively). The antioxidant effect of the ethyl acetate extract and methanol extract were generally stronger than that of n-hexane extract. The extracts were further purified by repeated silica gel column chromatography. The antioxidant compounds were identified as phytol, ${\beta}$-sitosterol, and (-)-loliolide using GC/MS.

• Journal of Life Science
• /
• v.21 no.1
• /
• pp.81-88
• /
• 2011

Biological activities (${\alpha},{\alpha}'$-diphenyl-${\beta}$-picrylhydrazyl (DPPH) free radical scavenging activity, fibrinolytic activity and reducing power) and biochemical properties (protein content and electrophoretical protein patterns) were examined in solid state fermentation with Bacillus subtilis and Aspergillus kawachii using silkworm powder (SP) as substrate. The highest protein contents and free radical scavenging activities were seen in the SP fermented for 12 days with B. subtilis and A. kawachii, and these were in a time-dependent manner. The highest reducing power was seen in the SP fermented for 6 days with B. subtilis and for 12 days with A. kawachii, respectively. The highest fibrinolytic activities were seen in silkworm fermented for 6 days with B. subtilis and A. kawachii, but this activity was higher in the A. kawachii fermented SP than that of B. subtilis. When total protein patterns were analyzed by SDS-polyacrylamide gel electrophoresis (PAGE), the proteins of the SP fermented with B. subtilis for 3 days were completely degraded, while the protein degradation in the SP fermented with A. kawachii occurred after 12 days and this degradation increased proportionally to culture time. As a result, the SP fermented with both B. subtilis and A. kawachii showed higher fibrinolytic activities after 6 days of fermentation and antioxidative activity after 12 days, indicating that physiological activities of the fermented SP using these strains were highly improved compared to the unfermented SP, and that this compound could be a candidate material as a dietary supplement of healthy functional foods.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.82-87
• /
• 2005

The cathode material, $LiNi_{0.5}Mn_{1.5}O_4$, for high voltage applications of Li-ion batteries exhibits impurity phases due to oxygen deficiency during the high temperature heat treatment. The impurity phase reduces the electrochemical properties of the electrode since the deficiency spinel structure disturbs the lithium ion intercalation and deintercalation. In this study, Cr-substituted $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4(0{\leq}x{\leq}0.05)$ powders are synthesized by a sol-gel method in order to reduce the amount of the impurity phases in the $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4$. Thermal analysis of the cathode material shows that the $LiNi_{0.5}Mn_{1.5}O_4$ without Cr substitution looses $2\%$ of its weight due to oxygen deficiency but the amount of weight loss is diminished when Cr is substituted. XRD analysis also supports the reduction of the impurity phases in the cathode after chromium substitution, suggesting that the improvement of the electrochemical properties such as the capacity retention and electrochemical stability are attributed to the low content of impurity phases in the Cr-substituted $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4.$

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.99-106
• /
• 1999

Ultra-high molecular weight polyethylene (UHMWPE) was crosslinked in the melt state to enhance wear resistance, Dicumyl peroxide (DCP) and triallyl cyanurate (TAC) was used as a crosslinking agent and a promoter, respectively. With increasing amount of DCP and TAC used, gel content of crosslinked UHMWPE (XUMPE) increased, while the melting temperature, crystallizaiton temperature, crystallinity, and tensile properties decreased. The results of pin-on-disk wear test and ball-on-disk test with small applied load showed reduced wear volumes of XUMPE from that of the unmodified UHMWPE. As the wear mechanism effected in the experimental condition of this study was thought to be deformation rather than adhesion or fatigue, a new parameter, the ratio of maximum contact stress to yield stress, was proposed to correlate well with observed wear resistance. In ball-on-disk wear test with larger applied load, XUMPE showed higher wear volumes than that of the unmodified UHMWPE which were accompanied with increased friction coefficients and surface roughness of the wear tracks. When contact stress was well above yield stress, the failure of XUMPE, as well as deformation, was thought to be much accelerated.