• Korean journal of food and cookery science
• /
• v.6 no.3 s.12
• /
• pp.1-7
• /
• 1990

The physicochemical properties of acorn and chestnut starches were investigated. The shape of two starches granules was the rounded trianglar and some elliptical, but that of chestnut was less rounded. Water binding capacity of acorn was 191% and that of chestnut was 200%. Gel volume of chestnut started to increase from $55^{\circ}C$, and was higher value in all temperature range. Amylose of chestnut starch was leached more than that of acorn to $90^{\circ}C$. and reversely from $90^{\circ}C$ to $100^{\circ}C$. The blue value and amylose content of acorn and chestnut starches were 0.464, 0.440 and 24.8%, 22.5 respectively. According to Brabender Amylogram, gelatinization temperature and peak. hot and cold viscosity were $68.5^{\circ}C$, 1010, 910, 1470 BU for acorn and $63.7^{\circ}C$, 1480, 1000, 1080 BU for chestnut. Peak temperature and gelatinization enthalpy were $67.0^{\circ}C$ 3.64 cal/g for acorn, and $66.0^{\circ}C$, 2.82 ca1/g for chestnut. X-ray diffraction patterns of two starches were A-types but chestnut had some B-type character.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1124-1129
• /
• 2005

Functional activities of low molecular weight substances purified from pepsin hydrolysates of four different seaweeds; Costaria costata, Enteromorpha prolifera, Grateloupia filicina and Porphyra tenera, were inves-tigated. Each pepsin hydrolysate of Costaria costata, Enteromorpha prolifera, and Grateloupia filicina resulted in three peptide peaks on Bio-Rad P2 gel chromatography pattern, while that of Porphyra tenera showed 2 peaks. Peak 1 of Porphyra tenera showed the highest antioxidative activity followed by peak 2 of Porphyra tenera and peak 2 of Costaria costata in order Peak 1 of Porphyra tenera showed the highest ACE inhibitory activity followed by peak 3 and peak 2 of Enteromorpha prolifera in order. Peak 1 and peak 2 of Porphyra tenera, and peak 2 of Enteromorpha prolifera showed the highest antityrosinase activity followed by peak 3 of Enteromorpha prolifera. Peak 1 of Enteromorpha prolifera showed the highest antitumor activity followed by peak 2 of Costaria costata, peak 3 of Enteromorpha prolifera, and peak 3 of Grateloupia filicina in order. Porphyra tenera showed the highest functional activities, which is thought to be due to its high protein content. Structure and amino acid sequence of low molecular weight peptide of Porphyra tenera should be analyzed in the further study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.1045-1050
• /
• 2006

Optimum operation condition for pilot scale of alkaline processing for fish muscle was investigated by measuring protein solubility, yield, texture, and water-holding capacity. Recovered protein yield was 33.2% for whole fish and 61.8% for minced muscle. Optimum homogenized speed and time, using industrial scale homogenizer, were 3,000 rpm and 5 min, respectively. Limited centrifugal force of continuous cylinder type was 4,000 rpm for recovering soluble protein, and 2,000 rpm for recovering precipitated proteins. The pH control agents such as citric acid, sodium phosphate and calcium oxide decreased the breaking force and deformation of recovered protein gel. The breaking force and deformation of the recovered proteins were high compared to conventional surimi. The breaking force and deformation were decreased by addition of salt, starch and bovine plasma proteins. Whiteness of recovered protein gel was lower than that of conventional surimi. Alkaline processing greatly decreased nitrogen content and chemical oxygen demand in waste water. The results suggest that alkaline processing has a potential as industrial production for recovering the proteins from fish muscle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.3
• /
• pp.300-306
• /
• 1989

This study was investigated to determine the functional properties of mugbean protein isolates(MPI) from sunhwa-nogdu(SH) and conventional mungbean varieties(C). MPI were prepared from defatted mungbean flour by extraction with 0.1N NaOH, precipitation at pH 4.5, washing of dispersed precipitate with buffer solution and distilled water, and subsequent freeze-drying. Crude protein content of MPI was in the range of $88.7{\sim}91.3%$. The lowest solubility was recorded at $pH\;4{\sim}5$, whereas the best buffering action was in the range of $5.5{\sim}7.5$. On the other hand, gelation of MPI was found to depend on the protein concentration. In the cases of foamability, % volume increase and specific volume were higher for 10 min. with a good whipping ability. And also, the MPI properties of two varieties of SH and C were compared and discussed.

• Journal of the Korean Magnetics Society
• /
• v.19 no.3
• /
• pp.113-119
• /
• 2009

$^{57}Fe_xCu_{1-x}O$(x = 0.0, 0.02) powders were prepared by sol-gel method and their crystallographic and magnetic hyperfine properties have been studied using X-ray diffraction and $M{\ddot{o}}ssbauer$ spectroscopy (MS). The crystal structure of the samples is found to be monoclinic without any secondary phases and their lattice parameters increase with increasing annealing temperature ($T_A$), which is attributed to an increase in oxygen-vacancy content. MS measurements at room temperature indicate that $Fe^{3+}$ ions substitute $Cu^{2+}$ sites and ferromagnetic phase grow with increasing $T_A$. Magnetic hyperfine and quadrupole interactions of $^{57}Fe_{0.02}Cu_{0.98}O$ ($T_A=500^{\circ}C$) in the antiferromagnetic state at 17 K have been studied, yielding the following results: $H_{hf}=426.94\;kOe$, ${\Delta}E_Q=-3.67\;mm/s$, I.S.=0.32 mm/s, ${\theta}=65^{\circ}$, ${\phi}=0^{\circ}$, and ${\eta}=0.6$.

• KSBB Journal
• /
• v.10 no.5
• /
• pp.589-597
• /
• 1995

Protein-bound polysaccahrides(PBP) were isolated, purified, and characterized from the sawdust media after harvesting the fruit body of Flammulina velutipes. The yield of the crude PBP(Fr.CA) extracted from the sawdust media, was 0.367% relative to the original sawdust media. The total sugar and protein contents of Fr.CA were 19.8% and 23.8% respectively. Using the membrane filtration, the fraction of which the molecular weight is over 300 kDa(Fr.A) was isolated from the Fr.CA and the yield was 44.6% relative to the Fr.CA. This result indicates that high molecular PBP is the dominant components of the Fr.CA. The Fr.A was separated into three fractions (Fr.A-1, Fr.A-2 and Fr.A-3) whose yields are 5.8%, 8.5% and 13.2% respectively. These fractions were further purified using gel filtration, obtaining a single peak in each fraction that considered as pure PBP Among them, the yield of Fr.A-1-${\alpha}$ was 20.9% relative to the Fr.A-1, and the molecular weight was 800 kDa. Monosaccharide components such as glucose, galactose, mannose, xylose and fucose could be detected all fractions by a HPLC analysis. Especially in the Fr.A-1-${\alpha}$ fraction, the content of glucose and galactose appeared to be high.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.235-244
• /
• 2020

This study conducted a series of studies to offer a novel method of using CBS-dust that produced as by-product in the manufacture of cement. Four different contents of BS and CBS-dust were adopted for test parameters of this study. Mortar with 50% of W/B was fabricated. First, in the case of the fresh mortar, the flow decreased as the CBS-dust replacement rate increased, but the binder composition ratio BS 45% and 65% showed higher fl ow than Pl ain when repl acing CBS-dust 5%. In the case of air content, overall, the tendency was proportional to the CBS-dust replacement rate, and chloride tended to exceed the reference value at all replacement rates except for the CBS-dust 0% replacement. The compressive strength of the hardened mortar shows the resul t that the strength is improved when the CBS-dust is repl aced by 5% to 10%, and the CSH gel and structure formation is confirmed by microstructure analysis through the hydration reaction when the CBS-dust is replaced. Therefore, for a given condition CBS-dust is used as a early-strength admixture in a concrete secondary product that uses a large amount of admixture without reinforcing bars it can be an effective method for enhancing the strength of concrete as an alkali activator.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.485-489
• /
• 2008

In this study, the fried fish paste was prepared from Alaska pollack meat paste added with propolis. The quality characteristics were analyzed by peroxide value, gel strength, color, viable cell count and sensory evaluation. The fried fish paste product had lower peroxide value and viable cell count after frying compared to the one without propolis. The antioxidant and antispoiling ability of propolis in fried fish paste increased with content of propolis. Gel strength increased with increasing addition of propolis. L-value decreased but a-value and b-value increased with the addition of propolis. In sensory evaluation, 0.17% propolis had the best score in overall acceptability. These results indicate that the fish paste could be prepared by adding the propolis for high quality and functionality. Consequently, propolis can be applied as a food preservative or additive.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.230-236
• /
• 2020

In this study, an adhesive tape with water and impact resistance for mobile devices was developed using a UV-curable urethane acrylate based polymer as a substrate. The substrate fabricated by UV-curable materials shows hydrophobicity and poor wettability, which significantly deteriorates the interface-adhesions between the substrate and acrylic adhesive. In order to improve the interface adhesion, 3-glycidoxy-propyl trimethoxysilane (GPTMS), a silane coupling agent having epoxy functional groups, was selected and incorporated into UV-curable urethane acrylate based polymer resins in various contents. The changes of the chemical composition according to the contents of GPTMS was studied with Fourier-transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) to know the surface bonding properties. Also mechanical properties of the substrate were characterized by tensile strength, gel fraction and water contact angle measurements. The peel strengths at 180° and 90° were measured to compare the adhesion between the substrate and adhesive according to the silane coupling agent contents. The mechanical strength of the urethane acrylate adhesive tape decreased as the silane coupling agent increased, but the adhesion between the substrate and adhesives increased remarkably at an appropriate content of 0.5~1 wt%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1528-1539
• /
• 2019

Objective: To evaluate the effects on microbial diversity and biochemical parameters of gradually increasing temperatures, from $5^{\circ}C$ to $25^{\circ}C$ on corn silage which was previously fermented at ambient or low temperature. Methods: Whole-plant corn silage was fermented in vacuum bag mini-silos at either $10^{\circ}C$ or $20^{\circ}C$ for two months and stored at $5^{\circ}C$ for two months. The mini-silos were then subjected to additional incubation from $5^{\circ}C$ to $25^{\circ}C$ in $5^{\circ}C$ increments. Bacterial and fungal diversity was assessed by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) profiling and biochemical analysis from mini-silos collected at each temperature. Results: A temperature of $10^{\circ}C$ during fermentation restricted silage fermentation compared to fermentation temperature of $20^{\circ}C$. As storage temperature increased from $5^{\circ}C$ to $25^{\circ}C$, little changes occurred in silages fermented at $20^{\circ}C$, in terms of most biochemical parameters as well as bacterial and fungal populations. However, a high number of enterobacteria and yeasts (4 to $5\;log_{10}$ colony forming unit/g fresh materials) were detected at $15^{\circ}C$ and above. PCR-DGGE profile showed that Candida humilis predominated the fungi flora. For silage fermented at $10^{\circ}C$, no significant changes were observed in most silage characteristics when temperature was increased from $5^{\circ}C$ to $20^{\circ}C$. However, above $20^{\circ}C$, silage fermentation resumed as observed from the significantly increased number of lactic acid bacteria colonies, acetic acid content, and the rapid decline in pH and water-soluble carbohydrates concentration. DGGE results showed that Lactobacillus buchneri started to dominate the bacterial flora as temperature increased from $20^{\circ}C$ to $25^{\circ}C$. Conclusion: Temperature during fermentation as well as temperature during storage modulates microorganism population development and fermentation patterns. Silage fermented at $20^{\circ}C$ indicated that these silages should have lower aerobic stability at opening because of better survival of yeasts and enterobacteria.