• Asian-Australasian Journal of Animal Sciences
• /
• 제27권1호
• /
• pp.115-122
• /
• 2014

This study investigated on the effects of adding mechanically deboned chicken meat (MDCM) hydrolysates on the quality properties of imitation fish paste (IFP) during storage. IFP was prepared from Alaska Pollack, spent laying hens surimi and protein hydrolysates which were enzymatically extracted from MDCM. The study was designed as a $3{\times}4$ factorial design with three MDCM hydrolysate content groups (0%, 0.4%, and 0.8%) and four storage times (0, 2, 4, and 6 weeks). Addition of MDCM hydrolysates increased crude fat content but lowered water content (p<0.05). The breaking force of IFP, an indicator of gel formation, increased in treated groups compared to control (p<0.05). Angiotensin I-converting enzyme (ACE) activity was inhibited and free radical scavenging activity increased with increasing MDCM hydrolysate content (p<0.05). In conclusion, the addition of MDCM to IFP improves gel characteristics. Additionally, protein hydrolysates from MDCM serve as a potential source of ACE inhibiting peptides.

• 펄프종이기술
• /
• 제43권1호
• /
• pp.11-16
• /
• 2011

This study was carried out in order to elucidate the effect of latex dosage and properties on aging behavior of coated paper. The coated paper with five different coating formulations were prepared and also four different latices were used. The coated paper were thermally aged at $105^{\circ}C$ for 14 days and the optical properties were measured. Increasing latex content increased the magnitude of reduction in brightness and whiteness. In addition, the variations in CIE a$^*b^*$ were larger with increasing latex dosage. Latex which has the lower gel content and the higher Tg showed the higher reduction in brightness and whiteness and much variation in CIE a$^*b^*$. However the particle size of latex didn't affect to thermal behavior of coated paper. These results indicate that latex which has higher Tg and lower gel content is the one of the main factors affecting aging behavior of coated paper.

• 한국축산식품학회지
• /
• 제42권5호
• /
• pp.861-873
• /
• 2022

The drying of duck blood provides safety and commercial benefits, but each drying method has its own characteristics. Moreover, information on the effects of diverse drying methods on the quality of duck blood is limited. This study aimed to investigate the effects of various drying methods on the chemical and functional properties of duck blood. The physicochemical characteristics and functional properties of duck blood subjected to spray drying (SD), freeze drying (FD), vacuum drying (VD), and hot air drying (HD) were examined. The carbonyl content of FD duck blood powder was the lowest and the thermal stability was higher than that of the other treatments (p<0.05). The gel obtained from spray-dried blood displayed the lowest malondialdehyde content. The hardness, gumminess, and chewiness were the highest in the heat-induced gel prepared from FD duck blood powder (p<0.05). The gel obtained from FD duck blood displayed a denser structure than the other gel samples. Taken together, the FD duck blood exhibited excellent chemical properties and processing suitability.

• Bulletin of the Korean Chemical Society
• /
• 제9권1호
• /
• pp.15-17
• /
• 1988

Titanium tetrachloride is purified using adsorption column packed with activated silica gel. When 120 ml of titanium tetrachloride was passed through an adsorption column filled with 7 g silica gel, iron content in titanium tetrachloride has been reduced from 7 ppm to less than 1 ppm, and aluminum from 46 ppm to 11 ppm, while silicon content being unchanged at about 60 ppm.

• 한국세라믹학회지
• /
• 제30권3호
• /
• pp.169-174
• /
• 1993

The porous silica glass prepared by the sol-gel method from the mixed solution of Si(OCH3)4, H2O, HCl and CH3OH with HCONH2 as a DCCA (Drying Control Chemical Additives). For investigation the characteristics of gels and glasses, we examined gels and glasses using TG-DTA, XRD, IR, SEM and porosimeter. The more content of formamide in the mixed solution increased, the more pore size and porosity of gel increased. In the excess formamide added gel, the properties of pore of gel were not so changed. The porous silica glass was prepared from the dry gel after heat treatment at 75$0^{\circ}C$. Porosity and mean pore size of the porous silica glass was 17~25% and 40~60$\AA$ relatively.

• 한국세라믹학회지
• /
• 제42권2호
• /
• pp.77-80
• /
• 2005

A series of proton conductive composite membranes based on poly(vinyl alcohol) and phosphosilicate gels powders were successfully prepared. The proton conductivity of these composite was attributed to the phosphosilicate gel, which derived from tetraethoxysilane and phosphoric acid by sol-gel process at a molar ratio of P/Si = 1.5. The proton conductivity increased with increasing both the content of phosphosilicate gel and relative humidity. Temperature dependence of conductivity showed a Vogel-Tamman-Fulcher type behavior, indicating that proton was transferred through a liquidlike phase formed in micropores of phosphosilicate gel. The high conductivity of 0.065 S/cm with a membrane containing 60 wt$\%$ of the gel was obtained at $60^{\circ}C$ at $90\%$ relative humidity.

• 한국식품과학회지
• /
• 제17권5호
• /
• pp.340-344
• /
• 1985

본(本) 연구(硏究)에서는 한천(寒天)의 조단백질(粗蛋白質). 회분(灰分)의 제거방법(除去方法) 및 gel강도(强度)에 미치는 영향(影響)을 검토(檢討)하였다. 조단백질(粗蛋白質) 및 회분(灰分)의 제거방법(除去方法)으로서 Trichloroacetic acid(TCA) 와 Perchloric acid(PCA)의 첨가처리(添加處理) 및 수침법(水浸法)을 사용(使用) 하였으며 그 결과(結果)는 다음과 같다. 조단백질(粗蛋白質) 제거공정(除去工程)에서 단백질(蛋白質) 침전제(沈澱劑)로는 PCA 가 TCA보다 더 효율적(效率的)이었다. 0.01% PCA 첨가시(添加時) 조단백질(粗蛋白質) 함량(含量)은 4.0%에서 1.0%로 감소(減少)하였고, gel 강도(强度)는 원료한천(原料寒天) 220g/$cm^2$에 대하여 402g/$cm^2$로 증가(增加)하였다. 회분제거공정(灰分除去工程)을 12시간(時間) 수침상태(水浸狀態)로 진탕함으로서 회분(灰分)이 8.7%에서 2.7%로 감소(減少)하였고 gel강도(强度)는 원료한천(原料寒天) 22/$cm^2$에 대해 530g/$cm^2$로 증가(增加)하였다. 그러나 회분함량(灰分含量)의 변화(變化)가 3% 미만에서는 gel강도(强度)에 미치는 영향(影響)이 거의 없었다.

• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.357-366
• /
• 1992

Residual organics were considered as impurity in Sol-Gel method. The purpose of this study was to find the conditions to contain as much residual organics as possible in silica gel prepared from TEOS(tetraethylortho-silicate) by Sol-Gel method. Residual organics are to be expected to have reduction effect on synthesizing Si3N4 from silica gel. The results of this study are follows: 1) The maximum content of entrapped carbon was 19.8 wt.%(C/SiO2=0.25 wt.ratio) in silica gel synthesized under the conditions 1.5 fold mole water for incomplete hydrolysis, 2.5 fold mole phenol as a solvent and 0.1 fold mole HCl as a catalyst to TEOS. 2) Silica gel with organics entrapped by Sol-Gel method had a positive effect on the formation of Si3N4 compared with commercial silica gel. 3) Sintered body of synthesized $\alpha$-Si3N4 with Y2O3 and Al2O3 as additives at 175$0^{\circ}C$ in N2 atmosphere showed bending strength, 602$\pm$20 MPa and frature toughness 4.45$\pm$0.15 MPa.m1/2.

• Journal of Microbiology and Biotechnology
• /
• 제13권3호
• /
• pp.338-343
• /
• 2003

Various factors, such as the adsorption pH, adjuvant dose, and adjuvant age, which affect the adsorption degree and immunogenicity of an antigen, were investigated. In addition, the effect of pH, antigen content, and adjuvant content on immunogenicity was also studied through animal experiments. Within the ranges studied, a low pH for adsorption, freshly preformed gel, and low pH formulation for the combined DTwP-HepB vaccine were preferrable for the adsorption of the antigens. In addition, a higher DT content was found to have a positive effect on the HBsAg immunogenicity in the combined vaccine. Accordingly, considering the factors affecting the adsorption rate and immunogenicity of the antigens, a novel DTwP-HepB vaccine (40 Lf/ml of diphtheria toxoid, 15 Lf/ml of tetanus toxoid, 20 OU/ml of detoxified whole cell pertussis, $24\;\mu\textrm{g}$ of HBsAg, $24\;\mu\textrm{g}\;Al/ml\;of \;Al(OH)_3\;gel,\;776\;\mu\textrm{g}\; Al/ml\;of\;AIPO_4\;gel$, and pH 7.1) was developed, whose immunogenicity was comparable to the case of administrating, separately and simultaneously, a combined DTwP vaccine (40 Lf/ml of diphtheria toxoid, 15 Lf/ml of tetanus toxoid, 20 OU/ml of detoxified whole cell pertussis, $300\;\mu\textrm{g}\;Al/ml\;of\; AIPO_4\;gel$, and pH 7.1) and mono HepB vaccine [$Hepavax^{\circledR},\;24\;\mu\textrm{g}/ml$ of HBsAg and $500\;\mu\textrm{g}\;Al/ml\;of\;Al(OH)_3\;gel$], which satisfies the potency criteria of the K-FDA for a combined DTwP vaccine and mono HepB vaccine.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.335-339
• /
• 2007

투명 polycarbonate(PC) 시트의 낮은 표면강도 문제를 극복하기 위해, 고굴절률을 보이는 유-무기 혼성 하드코팅 용액을 Sol-Gel 법을 이용하여 제조하였다. 코팅용액은 무기물 티타니아의 전구체인 TTIP(titanium tetraisopropoxide)에 유기물을 함유한 화합물인 GPTMS[(3-glycidoxypropyl) trimethoxysilane]를 첨가하여 제조하였다. 그 후 기재인 PC 시트에 스핀 코팅시키고, 열 경화 시켜 고굴절률을 보이는 하드코팅 필름을 제조 하였다. 코팅 용액 중의 GPTMS 함유량을 변화시킴에 의해 1.53-1.61의 굴절률을 갖는 코팅 막의 제조가 가능하였다. GPTMS의 첨가량이 증가할수록 코팅막의 굴절률은 감소하였으나, 연필경도는 증가하였다.