• The Korean Journal of Ceramics
• /
• 제1권3호
• /
• pp.160-164
• /
• 1995

Mechanical and chemical tests were performed on $Zro_2 \cdot SiO_2$ glass fibers manufactured by the sol-gel method and E-glass fibers-reinforced cement composites in order to investigate the interactions between glass fibers and cement matrices. Chemical attack leads to corrosion of the glass fiber surfaces. In the corrosion reactions, the surface of $30ZrO_2 \cdot 70 SiO_2$ glass fibers developed a densified concentric layer, which consists of glass corrosion products with much higher Zr and lower Si than the fresh glass fiber. The layer of reaction product is regarded to stiffen the cement matrices and provide a useful improvement to the mechanical properties. The addition of $ZrO_2$ content increases the corrosion resistance of glass fibers in cement by forming a passivating layer on the surface of glass fibers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1181-1184
• /
• 2008

$GeO_2$/ormosil organic-inorganic hybrid films doped with neodymium ions and $TiO_2$/Ormosil organic-inorganic hybrid films dispersed with neodymium oxide nanocrystals are prepared by combining an inverse microemulsion technique and a low-temperature sol-gel technique. The effects of $Nd^{3+}$ concentration, $Nd_2O_3$ nanocrystal content, and heat treatment temperature on up-conversion and photoluminescence luminescence properties of the hybrid films are studied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.840-844
• /
• 2003

The main objective of this investigation is to improve the photoluminescent of $Zn_{2}SiO_{4}:Mn$ phosphors prepared by the sol-gel technique. We try to use adding a new co-dopan such as Cr and Ti. The calcination temperature of sol-gel technique(1100 $^{\circ}C$) was lower than that of the solid state reaction (1300 $^{\circ}C$). Under 147nm excitation, the maximum emission intensity was obtained when the concentration of Cr and Ti was 0.1mol% with respect to $Zn_{2}SiO_{4}:Mn$. In order to study the effect of co-dopant, the content of Mn and the ratio of water to TEOS were fixed at 2mol% and 36:1, respectively.

• 대한화장품학회지
• /
• 제10권1호
• /
• pp.49-74
• /
• 1984

Rheology of gels prepared with stearyl dimethyl benzyl ammonium hectorite (SDBAH) and various polar additives in n-butyl acetate was investigated by measuring the viscosity and rheogram. Including generally recognized polar additives, additional studies on the rheogram and viscosity were made with ether-type methyl cellosolve and carbitol, with dimethyl sulfoxide (DMSO) having sulfonyl group, and furthermore with above-mentioned polar additives containing small quantity of water, It was observed that molecular size, dipole moments and dielectric constants of polar additives had a great influence on viscosity increase and rheology of SDBAH gel, and the increase of SDBAH interlayer spacing was important factor in gel formation and viscosity change. It was also shown that thixotropy effect was increased with the increase of polar additive concentration, finally changed to rheopexy from thixotropy as the concentration of polar additives was increased more than about 40% of SDBAH weight. In addition thixotropy changed to rheopexy as the increase of shear rate. It was further found that the aqueous solutions of polar additives (water content, 5-25%) had more effects on rheology than additives without water, and particularly 95clo DMSO solution was the most effective. And the optimum concentration of polar additives showing maximum viscosity in the same SDBAH concentration system was examined.

• Bulletin of the Korean Chemical Society
• /
• 제27권12호
• /
• pp.1981-1984
• /
• 2006

Novel amphiphilic, thermo-responsive polyaspartamides which showed both LCST (lower critical solution temperature), and sol-gel transition were prepared and characterized. The polyaspartamide derivatives were synthesized from polysuccinimide, the polycondensate of aspartic acid monomer, via successive nucleophilic ring-opening reaction by using dodecylamine and N-isopropylethylenediamine (NIPEDA). At the intermediate composition ranges, the dilute aqueous solution exhibited a thermally responsive phase separation due to the presence of LCST. The phase transition temperature was controllable by changing the content of pendent groups. In addition, a physical gelation, i.e. the sol-gel transition was observed from the concentrated solutions, which was elucidated by dynamic viscoelastic measurements. These novel injectable and thermo-responsive hydrogels have potential for various biomedical applications such as tissue engineering and current drug delivery system.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.774-780
• /
• 1997

Porous low reflective coating films of SiO2.ZrO2 system were prepared from the mixed alkoxide solutions of Zr(O-nC3H7)4 and partially prehydrolyzed TEOS by the sol-gel method using the dip-coating technique. In the case of 90SiO2.10ZrO2 porous coating films with HCl and H2O content was 0.3 mole and 4 mole, 378 m2/g of the specific surface area, 0.254 cm3/g of total pore volume, 30-50$\AA$ of average pore diameter. The transmittance of 90SiO2.10ZrO2 porous coated films was 95.38% at the wavelength of 550 nm, compared with the parent glass, the transmittance was increased with 4.38%.

• 방사선산업학회지
• /
• 제2권1호
• /
• pp.15-19
• /
• 2008

In order to develop a water-solubility and biocompatibility, chemically modified chitosan, N,O-carboxymethylchitosan (NOCC), was synthesized and the NOCC hydrogels were prepared by using ${\gamma}-ray$ irradiation instead of chemical reagents. The FT-IR spectroscopy, swelling behavior, gel content and mechanical property such as gel strength of the hydrogel were measured. When the NOCC solution concentration was 15 wt% and the dose of irradiation was less than 50 kGy, the NOCC hydrogels had an excellent hydrophilicity and exhibited a good swelling behavior and mechanical properties.

• 방사선산업학회지
• /
• 제3권1호
• /
• pp.31-37
• /
• 2009

This paper describes the preparation of manufacturing a new nanocomposite material, which involves adding a multi walled carbon nanotube (MWCNT) to improve thermal characteristics of poly (ethylene-co-vinyl acetate) (EVA). We irradiated the prepared nanocomposites with doses of 50 kGy, 100 kGy and 200 kGy at a dose rate of $5kGy\;hr^{-1}$ and examined their thermal stability, activation energy and crosslink level by using a thermogravimetric analyzer (TGA) and gel fraction experiments. TGA results indicated that the samples with a MWCNT had higher Derivative Thermo Gravimetry (DTG) 2nd peak temperatures than those without a MWCNT. And activation energy of the samples reduced as the absorption dose and the MWCNT content increased. Finally, the gel fraction increased rapidly up to 100 kGy as total absorption dose increased, and then the growth rate of all samples was slowly increased from 100 kGy.

• 한국작물학회지
• /
• 제38권6호
• /
• pp.513-523
• /
• 1993

쌀의 이용성 증진과 쌀 가공적성 육종을 위한 기초자료를 얻고자 쌀의 아밀로스함량 및 호화특성이 크게 다른 벼 24품종에 대한 쌀 배유전분의 구조 및 물성의 차이를 비교 분석한 결과를 요약하면 다음과 같다. 1. 쌀 전분-요-드 정색반응의 최대흡수파장이 찰은 520nm, 메는 560nm～600nm까지로서 이밀로스 함량이 높은 품종일수록 길어지는 경향이 있었고 비슷한 아밀로스함량 수준에서도 품종에 따라 최대흡수파장에 다소 차이가 있었다.2. 쌀 품종별 전본의 글루코오스쇄장분포 비교에 의하면 Fr. I에서 가장 큰 품종간 차이를 나타내었고 다음으로 중간분획(Int. Fr).과 Fr. III/Fr. II율에서 품종간 차이가 크게 나타났으며, 특히 아밀로펙틴의 미세구조를 나타내는 Fr.III/Fr. II율은 찹쌀이 멥쌀보다 높은 경향이었으나 멥쌀간에는 아밀로스함량과는 관계없이 품종간 차이를 나타내었다. 3. 알칼리 붕괴도가 낮은 품종일수록 전분입자의 50% 산 가수분해 소요시간이 길었으며, 호응집성이 경질인 품종과 연질이 품종들 모두에서 50% 산 가수분해 소요시간에 품종간 차이를 나타내었다. 또한 호응집성이 경질인 품종일수록 Fr. III의 분포가 낮고 Fr. I의 분포 및 아밀로스 함량은 높은 경향이었다. 4. 쌀의 전분구조 및 특성과 쌀의 이화학적특성에 따라 주성분분석에 의하여 공시품종들을 6개군으로 분류할 수 있었는데 이는 주로 아밀로스관련 성분과 아밀로펙틴 구조성분에 따라 군집화 되었다.

• KSBB Journal
• /
• 제24권6호
• /
• pp.563-569
• /
• 2009

피브로인은 누에고치가 생산되는 불용성 단백질이다. 고온의 염화칼슘용액에서 가용화시킨 후 탈염하여 물에 녹게 만들 수 있다. 그러나 수용액은 불안정하여 피브로인 분자는 랜덤코일에서 $\beta$병풍구조의 비율이 증가하는 구조로 전이되고 겔을 형성한다. 그러나 피브로인 겔은 약하고 탄성이 없어 소재로 응용하는데 어려움이 있다. 본 연구에서는 글리세롤과 에탄올을 사용하여 반고형의 피브로인 겔을 제조하고 이들의 유동 특성을 조사하였다. 80%의 글리세롤로 만들어진 피브로인 겔은 의가소성 및 thixotropic 특성을 나타내었으며 항복응력의 제곱근 값이 피브로인의 농도와 선형적으로 비례하였으며 항복응력이 없어지는 피브로인의 농도는 0.2%로 확인되었다. 40% 에탄올에서 만들어진 피브로인 겔은 매우 심한 thixotropic 특성을 보였으며 전단속도가 어떤 값 이상이 되면 급격한 전단연화 현상을 나타내었다. 이 피브로인 겔은 전단이력 후 의가소성을 회복하는 특성을 나타내었다.