• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.50-55
• /
• 2022

Acceleration performance, maximum velocity, urban driving energy consumption, and high-way driving energy consumption are important characteristics of electric vehicle driving. This study analyzes the effect of a gear ratio on these characteristics for a front wheel drive electric vehicle. The normalized sensitivity metric is used to compare the sensitivity of these scaled characteristics to the changes in the gear ratio. The sensitivity analysis results show that the normalized values are 0.95 for maximum velocity, 0.91 for acceleration performance, 0.51 for urban driving energy consumption, and 0.24 for high-way driving energy consumption. Therefore, the maximum velocity was affected the most by the changes in the gear ratio. These results can be used to determine the gear ratio of a front wheel drive electric vehicle to optimize the driving characteristics simultaneously.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.120-127
• /
• 1998

In this study the dynamic characteristics of automatic transmission system due to the change of the planetary gear ratio is studied. To study the power flow and shift quality for power transmission the simulation program is developed using the modeling and analysis technique. The results from this study will be used in designing the basic structure of automatic transmission using planetary gear system.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2002년도 추계 학술논문발표회 논문집
• /
• pp.263-269
• /
• 2002

Design method for Involute bevel gears is developed. The developed gear design system can design the optimized gear that minimize the number of pinion teeth with face tooth. Method of optimization is MS(matrix search) which is developed from this study. Design variables are pressure angle 20, transmitted power, gear volume, gear ratio, allowable contact stress and allowable bending stress, etc. Design method developed this study can bd applide to the plane, machine tools, automobiles.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.687-692
• /
• 2002

This paper reviews the existing methods to divide the gear ratios of a multi-stage gear train, and proposes a simulated annealing-based algorithm to find the best gear ratios. The existing methods have their own limitations to be used in practical design, and are also problematic to be automated in a design system. However, the proposed algorithm is a general one which can be applied to gear trains having any number of stages, and offers a satisfactory result in a very short time. It is expected to be useful as a design sub-module of the design system for multi-stage gear drives.

• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.86-91
• /
• 2014

This paper presents a design procedure for a face gear and pinion used in a handpiece with a $160^{\circ}\acute{y}$ contra angle and 1:2 gear ratio. Based on the geometric theory of gearing, the tooth profile of the face gear and pinion is developed. To analyze the contact pressure, the gear profile should be determined before calculating the stress between the two gears. The concept of calculating the face gear profile is that it can be generated by the coordinate transformation of the shaper profiles, which have involute curves, using a simulation method from the gear manufacturing process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.347-348
• /
• 2006

Among various gear system, planetary gear system has the best characteristics in high efficiency, excellent strength capacity, easy convertible speed control, and compact design aspect. Strength of gear is considered as the most important design factor. We have studied tooth form and the planetary gear system that have high reduction gear ratio is created by using the involute curve.

• 한국전자통신학회논문지
• /
• 제19권1호
• /
• pp.77-84
• /
• 2024

기어비 변환을 목적으로 설계한 전자석 마그네틱 기어는 영구자석을 이용한 마그네틱 기어와 비교해 낮은 토크 밀도를 가져 토크 밀도의 개선이 필요하다. 이를 보완하고자 기어비 변환 시 각각의 회전자의 자화 방향이 일정한 치를 확인하여 이에 영구자석을 부착해 부족한 토크 밀도를 높이는 연구를 진행했다. 하지만 영구자석이 고르게 부착되지 않으면서 발생한 자속밀도의 불균일로 인해 토크 리플이 증가하는 현상이 문제점으로 발생 되었다. 따라서 전자석 마그네틱 기어의 토크 리플을 감소시키고자 진행된 선행연구를 토대로 폴피스 브릿지, 필레 방식을 적용하여 기어비 변환을 하더라도 각각의 토크 리플을 개선할 수 있는 최적의 방법을 모색하고자 한다.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.54-66
• /
• 1998

In a passenger car automatic transmission, the gear ratio is determined by the combination of clutches and brakes, and each element of th planetary gear set is rotated or held stationary by the action of them. In this study, to investigate the shift characteristics of automatic transmission, the equations of motion are derived from the dynamic model of Ravigneaux type planetary gear set and solved analytically. The shift characteristics of each element of planetary gera set during gear ratio change are investigated by considering the torques and velocities of input, reaction and output elements.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.643-646
• /
• 1997

Gear trains are used in many machinery for variable speed ratios. Typical shapes of gear trains are tivo categories : simple gear trains and planetary gear trains. This paper presents the kinematic ctraracteristics for planetary gear trains. The characteristics are the constraints of geometric relationships, number of gears, speed of each gear. and speed ratio of the train. The objective goal of this paper provides the CAI) software, which is the academic tool for understanding the kinematics of the planetary gear trains.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.172-177
• /
• 2004

A planetary gear trains has characteristics in compactness, power transformation ability and constant meshing. Usability is increased in applications of auto transmission and industrial gearbox. Study on optimum design of planetary gear train has been progressed on minimization of weight, miniaturization of planetary gear train and improvement of high strength. There are demands of study for the planetary gear train required long lift estimation In this wort being considered life, strength, intereference, contact ratio and aspect ratio, the optimum design algorithm is proposed to reduce the volume of planetary gear train with transferring the same amount of power. In the design of algorithm for planetary gear train, the determination of teeth number is separated to achieve simplicity and the simulated annealing method as a global optimal technique is used for optimal design method.