• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.737-741
• /
• 2003

The wind power system is spotlighted as one of the no-pollution power generation systems. The system uses winds as power source that are rotated the blade and the rotating power from blade generate the electricity power. Gearbox needs to transfer the wind powers that have the high-torque-low-speed characteristics to generator that have the low-torque-high-speed characteristics. Because the wind power system generally locates the remote place like seaside or mountainside and the gearbox installs on the limited and high placed space, the gearbox of the wind power system is required the optimal space design and high reliability. In this paper, the structure of the gearbox is proposed to achieve the optimal space and efficiency by compounding the planetary gear train that has the high power density and parallel type gear train that has the long service life. The design parameters that are affected the service life are studied. The gear ratio and face width are investigated as an affected parameter for design sensitivity of service life.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.90-98
• /
• 2005

HMT is a type of continuously variable transmission which has split power flow path characteristics with gear train and hydro static unit. The benefit of improved fuel economy and high power capacity enables it to be a promising application fur large vehicles. This paper presents the analysis results including velocity, static torque, transmission efficiency and dynamic model of the HMT that is developed for city buses. The speeds or gear shafts, the static clutch torque and split power ratio for each mode are detailed here. From the analysis of HMT transmission efficiency considering the power loss in meshed gear and hydraulic unit, we can conclude that minimization of hydraulic power is necessary for improved fuel economy design. Also, the dynamic simulation result for mode shift characteristics shows that little shift shock is observed because of the synchronized rotation speed in clutch.

• 수산해양기술연구
• /
• 제48권4호
• /
• pp.301-309
• /
• 2012

A net-assembling company for gill net fishing gears makes a design based on the size of nets provided and determines floats, types of weights, and numbers. In addition, through the accurate examination of net weights in the process of fishing gear designing, it can prevent an excessive use of designing costs. The weight of twine can be easily calculated by its thickness differences, but the weight of netting has errors to be calibrated since the weight of netting is not changing exponentially with the changes of number and size of meshes. This study aims to suggest and empirically analyze the methods for estimating the weights of netting in accordance with the changes of number, size and thickness of meshes for a sound management of netting and net-assembling companies. Results indicated that the method using the knots and legs of netting was not practically usable because the errors were increased as the number of mesh increased. However, the method using netting area shown its usage potentiality with the calibration of the increasing ratio of mesh numbers.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1613-1616
• /
• 1997

In order to develop a human hand mechanism, a 5-bar finger with redundant actuation is designed and implemented. an optimal set of acutator locations and link lengths for the case of one redundant actuator is obtained by employing a composite design index which simulataneously consider several performance indices such as workspace, isotropic index, and force transmission ratio. Each joing is driven by an compact actuator mechanism having ultrasonic motor and a gear set with poeneiometer an controlled by VME Bus-based control system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.458-461
• /
• 2002

This study presents development of a machine for shrink wrapping of cans or drink bottles with thermoplastic films. The accurate position-control, the safety factor of chains, the reduction-ratio of the chain and gear, the appropriate heating temperature for banding vinyl are discussed for the optimum shrink wrapping M/C design.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.7-14
• /
• 2010

In order to analyze the vibro-impacts in the torsional system, several clearance types of nonlinearities should be included with the analytical or numerical method. These kinds of nonlinear factors can cause the errors while the system is calculated specifically with the numerical method, also it might take too long to get right answers with the every nonlinearity in the original system. Therefore, there are several methods developed for the sake of overcoming the deficiency of the analysis with the original system and saving the calculating time. The original system can be reduced by keeping the system characteristics such as from 14 to 6 DOF. Especially, since the torque flow in the torsional system is connected with the specific gear ratios, the original system can be transferred into the simpler system corresponding to each gear ratio rather than the original system, which can also show the same system characteristics such as the natural frequencies and the mode shapes. By using the reduced system, the calculating time can be saved and the redundant nonlinear effects for the system analysis can be ignored without any numerical errors.

• 임산에너지
• /
• 제7권1호
• /
• pp.28-36
• /
• 1987

To know the possibility of fuel substitution for Diesel engine with the seed oil of Evodia daniellii, which is one of the native oil seed trees in Korea. the refined seed oil mixed with light oil in the various rates was tested in the 8 PS Diesel engine: the output, the fuel consumption rate, the governor performance, the rpm stability in the total loading condition. the content of graphite in the burned gas, and the traction coefficients at the different gear stages were maintained The following results were discussed. 1. The output at the normal revolution (2200rpm)was increased as the percent seed oil increased. At the lower rpm (2000-1500rpm )there were no consistent difference in the outputs among fuels of the different percent seed oil 2. The rate of fuel consumption was inclosed as the percent seed oil increased in each loading condition. 3. The more percent sud oil was mixed in the fuel. the better governor performance appeared at both the instantaneous and stable speed. 4. The more percent seed oil was mixed In the fuel, the more stable rpm ratio was maintained 5. The graphite content In the burned gas was increased as the load increased, but there was no apparent difference in the content at each load among the 100$\%$ seed oil, the 100$\%$ light oil, and the mixtures in various rates. 6. In all fuel mixtures the maximam traction coefficent appeared at the third transmission gear stage. Generally in over all transmission gear stages the fuel mixtures of the seed oil:light oil ratio from 7:3 to 5:5 resulted greater traction force than the other fuels.

• 수산해양기술연구
• /
• 제25권1호
• /
• pp.6-11
• /
• 1989

현재 보편적으로 사용하고 있는 재식성안강망 그물은 본 연구의 제1보에서 그 1/20 크기의 모형어구를 측정.조사한 결과, 몇 가지 흠함이 규명되었으나, 여기서는 그 흠함을 보완하기 위하여 망지배치와 구성을 새로하고, 그 1/20크기의 모형어구를 써서 전개장치를 측정.관찰한 결과를 요약하면 다음과 같다. 1. 새로 설계된 어구의 특징은 (1) 망지배치는 등판.밑판.양 옆판의 앞끝을 재뢰식보다 20%정도 줄이고, 옆구리의 폭을 10%정도 늘였으며, 등판.밑판의 앞쪽 중앙부는 길이의 20%정도까지 만곡되게 사단했다. (2) 뜸줄.발줄의 길이는 망지배치상 재뢰식보다 6%정도 짧게 했다. (3) 그물의 네모서리에서 적당한 성형을 하면서 힘줄을 붙였다. (4) 전개장치의 높이는 재뢰식보다 17%정도 짧게 했으며, 상단에 붙이는 뜸의 부력은 20%정도 크게 했다. (5) 네갈랫줄의 길이는 중앙부의 것을 길게, 상하의 것을 짧게 했다. 2. 이 어구로서 측정한 결과는 (1) 등판.밑판 앞쪽 중앙부의 구김살이 제거되어 상면에서 본 그물 언저리 선이 원활해 졌다. (2) 망구의 전개 높이는 재뢰식보다 3%정도 커졌다. (3) 망구의 전개간격은 재뢰식보다 1.5~1.6배로 커졌다. (4) 유체저항은 재뢰식보다 10~17% 작아졌다

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권1호
• /
• pp.34-43
• /
• 2007

As a method to improve the poor torque capacity on the continuously variable transmission(CVT), power splitted devices(PSD) reducing the power entering into the transmission has been considered. But this kind of PSD requires for the variator to be a large coverage of the speed ratio (CSR) Since the CSRs of the well-known push belt or the toroidal ones are not enough large, the power splitted CVTs (PSCVTs) using them should be made with multiple modes. inevitably adding the do9 clutches and the associated accessories. In this paper a PSCVT with single mode is conceptually designed A new continuously variable unit (CVU) consisting of the paired inner and outer spherical rotors is used. The CVU has large CSR and excellent compactness. As a PSD. a variable bridge (VB) using the Planetary gear units (PGUs) is considered because it has an upper bound on the power ratio. An optimal design to minimize the effective efficiency of the PSCVT is carried out. Through the performance analysis on the designed model, good expectation on the practicability in the heavy vehicle system is shown.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.659-664
• /
• 2000

Fuel-consumption and catalyst-out emissions of a parallel hybrid electric vehicle are affected by operating region of an engine. In many researches, It is generally known that it is profitable in fuel- consumption to operate engine in OOL(Optimal Operating Line). We established the mathematical model of a parallel hybrid electric vehicle, which is linear time-invariant. To operate an engine in OOL, we applied RHC(Receding Horizon Control) to the driving control of a parallel hybrid electric vehicle. And it is known that the RHC has advantages such as good tracking performance under state and control constraints. This RHC is obtained by using linear matrix inequality (LMI) optimization. In this paper, there are three main topics. First, without state and control constraints, the optimal tracking of OOL was simulated. Second, with state and control constraints by engine and motor performances, the optimal tracking of OOL was simulated. In the last, we studied on the optimal gear ratio. That is to say, we combined the RHC and the iterative simulation to extract the optimal gear ratio. In this simulation, the vehicle is commanded to track the reference vehicle trajectory and the engine is operated in the optimal operating region which is made by the state constraints.