• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.831-836
• /
• 2004

Vibration of electric-powered hand grinder comes from the parts of motor, gear, bearing, and fan. Excessive vibration can be harmful to workers. To reduce vibration of a hand grinder we analyzed the frequency components from the routing electric-powered grinder and did modal test to find the natural frequencies of the each part. It shows that the vibration is due to the resonance of the case. To remove the resonance, the case structure is modified and the bearing cap is replaced on a basis of the results from the rotor dynamic analysis using SAMCEF. As a result the vibration of the hand grinder is reduced greatly.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1108-1113
• /
• 2000

A condition monitoring methodology for rotating machinery is proposed based on multivariate statistical analysis. The CMS usually are using the vibration signal amplitude such as acceleration RMS, peak and velocity RMS to detect machine faults but the information is not so enough that CMS cannot perform reliable monitoring. So new parameters are added such as shape factor, crest factor, kurtosis and skewness as time domain parameters and spectrum amplitude of rotating frequency, $2^{nd}$ harmonics and gear mesh frequency etc. as frequency domain parameters. Many parameters are combined to represent the machine state using the Hotelling's $T^2$ statistics. The proposed methodology is tested in laboratory and the on-line experiment has shown that the proposed methodology offers a reliable monitoring for rotating machinery.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1119-1126
• /
• 2000

This paper is concerned with the design and application of an Electro-Rheological(ER) fluid damper to suppress the vibration of a rotor system. The system is flexible with a slender shaft and a thin disk, being supported by two ball bearings. In addition, to investigate the system performances also in the high speed range, the driving torque is made transmit through a speed increasing gear train. Along with the experiments, to predict and compare the ER damper effect, the rotor system is simulated as to its free and forced vibration characteristics by means of a finite element method code, which is assembled with the mathematical model of the designed ER damper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1127-1132
• /
• 2000

Impulsive acoustic and vibration signals within rotating machinery are often induced by irregular impacting. The detection of these impulses can be useful for fault diagnosis purposes. Recently there has been an increasing trend towards the use of higher order statistics for fault detection within mechanical systems based on the observation that impulsive signals tend to increase the kurtosis values. This paper considers the use of the third and fourth order Wigner moment spectra, called the Wigner bi- and tri- spectra receptively, for analysing such signals. Expressions for the auto-and cross-terms in these distributions are presented and discussed. It is shown that the Wigner trispectrum is a more suitable analysis tool and it performance is compared to its second order counterpart for detecting impulsive signals. These methods are also applied to measured data sets from an industrial gearbox.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.71-76
• /
• 2011

In this paper, we investigate the vibration source of sheet feeding apparatus installed in scanner cover of the digital MFP through frequency analysis. Gearmesh frequency and motor generated frequency were calculated to analyse autospectrum. During driving state, we measure the vibration level. It was found from the signal analysis that gearmesh frequency and motor generated frequency are identified as vibration source.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.1035-1040
• /
• 2004

The vibration of an electric hand grinder originates from the motor, gear, bearing, and fan. Its excessive vibration can be harmful to workers. To reduce the vibration of an electric hand grinder. frequency analysis for the vibration signals of a running electric hand grinder and modal test for the each part were done. The results show that the vibration is due to the resonance of the case. To remove the resonance, the case structure was modified and the bearing cap was replaced on a basis of the results of the rotor dynamic analysis using SAMCEF. As a result, the vibration of the electric hand grinder was reduced greatly.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.107-117
• /
• 1996

The shift feeling, a driver experiences during gear shifting, is a major factor in manual transmission quality. Recently, the shift feeling has becoming more severe every year in proportion to the higher torque and revolution speed of today's automotive engine. In this paper, first, the diagram of a relation between cone angle, sleeve chamfer angle, and friction coefficient of ring is investigated for easy design of Synchromesh system. And then, methodology to solve the shift problems such as clashing noise and rough shift, ect. by analyzing the synchronization procedure in sequence and by investigating the shift waveform if presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.138-140
• /
• 2014

The image quality of the color laser printer is highly related with the motion quality of actuators. However, the high precision system requires high production costs in general. The proposed design method in this paper improves image quality without increasing production costs. Using the synchronization method, time gap between exposure and transfer in organic photo conductive (OPC) drum and the period of driving gear revolution are synchronized. The proposed method is verified by computer simulations and experiment, and showed by printed images.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1328-1333
• /
• 2006

For fault diagnosis of machines and equipments, knowledge-based method has been used widely but has some limitations for complex systems. These can be covered by model-based method. As one kind of model-based method, Qualitative modeling diagnosis method is developed in this research. The developed method uses output signal only. In this method quantization of the output signal mattes automata which can characterize the flow of the signal pattern to normal and fault respectively. As an example of the qualitative diagnosis method, an electric tool which has faults at gear and bearing were examined in this research. The result shows that the developed method can diagnose the fault clearly for the two fault cases.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.583-586
• /
• 2012

Wind turbine industry is booming and spending a lot on research for improving the performance of its present machines and increasing their capacity. Wind turbine requires service life of about 20 years and each canponents of wind turbine requires high durability, because installation and maintenance costs are more expensive than generated electricity by wind-turbine. So the design of wind turbine must be verified in various condition before production step. For this work, high reliability model for analysis is required. Drivetrain model is modeled by multibody dynamic modeling method. The model constituted with rotor blades, hub, main shaft, gear box, high speed shaft and generator. Natural frequency and torsional stiffness of drivetrain are calculated and analyzed.