• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.120-127
• /
• 1998

In this study the dynamic characteristics of automatic transmission system due to the change of the planetary gear ratio is studied. To study the power flow and shift quality for power transmission the simulation program is developed using the modeling and analysis technique. The results from this study will be used in designing the basic structure of automatic transmission using planetary gear system.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.54-66
• /
• 1998

In a passenger car automatic transmission, the gear ratio is determined by the combination of clutches and brakes, and each element of th planetary gear set is rotated or held stationary by the action of them. In this study, to investigate the shift characteristics of automatic transmission, the equations of motion are derived from the dynamic model of Ravigneaux type planetary gear set and solved analytically. The shift characteristics of each element of planetary gera set during gear ratio change are investigated by considering the torques and velocities of input, reaction and output elements.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.172-181
• /
• 1997

The dynamic characteristics during gear ratio change including the disturbance of output torque has been one of the most important issues in the study of automatic transmissions of passenger cars. In this paper, to investigate the dynamic characteristics of a passenger car automatic transmission during gear ratio change, a dynamic model of the driveline of a passenger car focused on the automatic transmission is proposed and the dynamic simulation program is developed. The results of the simulation show good agreements with the experimental data, which process the use fullness of the dynamic model and the simulation of the driveline.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.50-55
• /
• 2022

Acceleration performance, maximum velocity, urban driving energy consumption, and high-way driving energy consumption are important characteristics of electric vehicle driving. This study analyzes the effect of a gear ratio on these characteristics for a front wheel drive electric vehicle. The normalized sensitivity metric is used to compare the sensitivity of these scaled characteristics to the changes in the gear ratio. The sensitivity analysis results show that the normalized values are 0.95 for maximum velocity, 0.91 for acceleration performance, 0.51 for urban driving energy consumption, and 0.24 for high-way driving energy consumption. Therefore, the maximum velocity was affected the most by the changes in the gear ratio. These results can be used to determine the gear ratio of a front wheel drive electric vehicle to optimize the driving characteristics simultaneously.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2130-2141
• /
• 2002

A unique technique to estimate the magnitude or contribution ratio of each stage backlash in a system with a two-stage gear reducer is proposed. The concept to estimate the magnitude or contribution ratio of each stage backlash is based on the change of frequency response characteristic, in particular, the change of anti-resonant frequency and resonant frequency, due to the change of each stage backlash magnitude, even though the total backlash magnitude of a system with a two-stage gear reducer is constant. The validity of the technique is verified in a seeker gimbal and satisfactory results are obtained. It is thought that the diagnosis and maintenance of the manufacturing machines and systems with two-stage gear reducers will become more efficient and economical by virtue of the proposed technique.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.103-109
• /
• 2002

The paper investigates the change of frequency response characteristics on two-stage gear reduction servo system according to the variation of backlash amount of each gear reduction stage, under the condition that the backlash of total system is constant. It is shown that the frequency response characteristics of the system heavily depend on the contribution ratio which is defined as a ratio of the first backlash amount to the total backlash. It is also found that there is an optimal backlash combination to maximize the bandwidth of two-stage gear reduction servo system when the allowable total backlash is determined.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.1-7
• /
• 2006

Nowadays, out of other transmission parts, the sleeve is getting more and more important part for exact and smooth shifting from gear ratio change whenever drivers are needed. To exact and smooth shifting when drivers are needed, all the parts connected with gear shifting should be machined exactly and having dimensions designers are intended. Especially, in case of the sleeve that the most important functional part to shift from gear ratio change that drivers are intended, it needs high precision grade and quality in both sides runout and outer dia runout as well as inner spline small dia & large dia. Because it's assembled with the synchro hub spline and shifted directly with the mating cone. So, it should be applied the hear treatment(hereinafter referred to H.T.M.T) to prevent the friction and percussion loss from shifting with mating cone. At this time, the deformation problems are raised from almost H.T.M.T. process and it makes the inferior part.

• Tribology and Lubricants
• /
• 제30권4호
• /
• pp.212-217
• /
• 2014

A counter gear transmits the rotation angle, so the angular velocity ratio of the gear does not necessarily need to be constant in the meshing process. As a pinion has a small number of teeth when combined with an internal gear for counters, tooth interference can occur with the use of an involute curve. This paper introduces circular arcs that represent a tooth profile and fillet for the profile design of a pinion through the combination of arcs with lines. The straight line of a rack tooth represents the profile of a mating internal gear. Thus, the circular arc and line maintain contact during the rotation of the counter gear. This paper presents an analysis of the meshing of the circular arc tooth and rack tooth along with the properties of the counter gear, such as the change in rotational velocity and amount of backlash. The contact ratio of the counter gear is 1 because the tooth contact occurs between circular arcs and line. The initial position of tooth contact, which denotes the simultaneous contact of two teeth, is found. As the rotation of the pinion, only one tooth keeps the contact situation. This meshing property is analyzed by the geometrical constraints of the tooth profile in contact and the results are presented as graphical diagrams in which tooth-arc movements are superimposed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.552-558
• /
• 2001

When operating lathe gear box which is equipped with geared transmission, it sometimes generates loud noise and excessive vibrations. In order to identify their causes, in this study, torsional and lateral vibration characteristics including critical speeds of the gear transmission system are firstly analyzed using lumped parameter models. Natural frequencies and mode shapes of the gear box structure are also analyzed by using the modal test. Furthermore, measured vibration and noise signals during operations are analyzed and compared with theoretical analysis results. After all, it is concluded that the primary cause of the excessive noise and vibrations is the resonance between gear meshing frequency including its side bands, the frequencies of shaft bending and torsional vibrations, and the natural frequencies of the gear box structure. Consequently the noise and vibration levels are greatly reduced by avoiding resonance between the natural frequencies and gear meshing frequencies through the rearrangement of the gears on the transmission shaft without any gear ratio change.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.15-20
• /
• 2017

This study analyzed the load change of the gear generated by the operation of the vehicle recliner through Finite Element Analysis. The basic model of the recliner used was a commercial product, and the effect of the seat frame was excluded. The load conditions applied to the recliner were set considering gravity, the mass of the seat's back frame, and the weight of a person. The operating mode was set to move the seat back from the vertical to the reclined position. As a result, it was found that the tooth bending amount of the gear rim and wheel increased from the cam rotation angle of 450 degrees, and a change in the contact ratio occurred. Furthermore, excessive torque fluctuations occurred in the ranges of 390 to 450 and 750 to 710 degrees. It was found that this occurred in the region of about 30 degrees before and after the point where the x-axis direction load is larger than the y-direction load. From this torque fluctuation it was determined to likely to cause chattering noise.