• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.264-268
• /
• 2007

This article presents the performance evaluation case study of circuit-switched WCDMA R5MSC(Mobile Switching Center) Server and CS-MGW(Circuit Switched Media Gateway) in 3'rd generation mobile telecommunication (UMTS : Universal Mobile Telecommunication System). The presented work adopted circuit switching scenarios recommended by 3GPP(Third Generation Partnership Project) and terrestrial spectrum calculation parameters and its values defined in ITU-R M.2023 and M.1390 to do the case study on performance evaluation of circuit switched system (R5 MSC Server and CS-MGW) in WCDMA core network. This paper describes test results by using simulator which substitutes for wireless section (MS, Node-B, RNC).

• 대한임베디드공학회논문지
• /
• 제11권6호
• /
• pp.369-377
• /
• 2016

Recently, many changes have been made to people's life patterns as the technological advances in the ICT industry. The fusion of smart phones and various IT technologies has brought people convenience and welfare. A typical example of such fusion is the smart home. However, the existing smart home systems are difficult to be changed or extended. So we design a new smart home system with extensibility that can easily adopt legacy appliances and be scaled up. Among a variety of smart home features, this paper deals with IoT Devices that are responsible for controlling power or transmitting and receiving sensing values, IoT Gateway that connects users and consumer electronics via Internet, and Smart Home Manager that monitors and controls these components in the proposed smart home system.

• 한국멀티미디어학회논문지
• /
• 제17권11호
• /
• pp.1279-1285
• /
• 2014

In this paper, we propose on image encryption method which uses NC(Non-linear Cycle) and 2D CAT(Two-Dimensional Cellular Automata Transform) in sequence to encrypt medical images. In terms of the methodology, we use NC to generate a pseudo noise sequence equal to the size of the original image. We then conduct an XOR operation of the generated sequence with the original image to conduct level 1 NC encryption. Then we set the proper Gateway Values to generate the 2D CAT basis functions. We multiply the generated basis functions by the altered NC encryption image to conduct the 2nd level 2D CAT encryption. Finally, we verify that the proposed method is efficient and extremely safe by conducting an analysis of the key spatial and sensitivity analysis of pixels.

• Geomechanics and Engineering
• /
• 제21권1호
• /
• pp.23-33
• /
• 2020

An advancing cutting roof for gob-side entry retaining with no-pillar mining under specific geological conditions is more conducive to the safe and efficient production in a coalmine. This method is being promoted for use in a large number of coalmines because it has many advantages compared to the retaining method with an artificial filling wall as the gateway side filling body. In order to observe the inner structure of the gateway cutting roof and understand its stability mechanism, an equivalent material simulation experiment for a coalmine with complex geological conditions was carried out in this study. The results show that a "self-stabilization bearing structure" equilibrium model was found after the cutting roof caving when the cut line deviation angle was unequal to zero and the cut height was greater than the mining height, and the caving roof rock was hard without damage. The model showed that its stability was mainly controlled by two key blocks. Furthermore, in order to determine the optimal parameters of the cut height and the cut line deviation angle for the cutting roof of the retaining gateway, an in-depth analysis with theoretical mechanics and mine rock mechanics of the model was performed, and the relationship between the roof balance control force and the cut height and cut line deviation angle was solved. It was found that the selection of the values of the cut height and the cut line deviation angle had to conform to a certain principle that it should not only utilize the support force provided by the coal wall and the contact surface of the two key blocks but also prevent the failure of the coal wall and the contact surface.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.782-787
• /
• 2004

Internet Engineering Task Force (IETF) has been considering the deployment of the Random Early Detection (RED) in order to avoid the increasing of packet loss rates which caused by an exponential increase in network traffic and buffer overflow. Although RED mechanism can prevent buffer overflow and hence reduce an average values of packet loss rates, but this technique is ineffective in preventing the consecutive drop in the high traffic condition. Moreover, it increases a probability and average number of consecutive dropped packet in the low traffic condition (named as "uncritical condition"). RED mechanism effects to TCP congestion control that build up the consecutive of the unnecessary transmission rate reducing; lead to low utilization on the link and consequently degrade the network performance. To overcome these problems, we have proposed a new mechanism, named as Extended Drop slope RED (ExRED) mechanism, by modifying the traditional RED. The numerical and simulation results show that our proposed mechanism reduces a drop probability in the uncritical condition.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.855-858
• /
• 2008

21세기 지식기반사회에서는 국가 경쟁력의 척도가 그 나라가 보유한 지식의 가치 창조력이라 할 수 있다. 한국의 국가 및 민간 연구개발(R&D) 투자액은 세계에서 상위를 차지하고 있고, 한국은 선진국과 함께 미래기술을 개발할 수 있는 과학기술선진국으로 분류되어 있다. 그러나 과학기술 글로벌화 수준은 OECD 국가 중 최저 수준에 머물러 있다. 이 논문에서 한국 과학기술 정보를 해외로 유통시키기 위해 비영어권 국가들의 과학기술정보 국제화 노력을 살펴보고, 현재 KISTI가 추진중인 글로벌 유통체제인 KoreaScience를 소개한다.

• 한국문헌정보학회지
• /
• 제43권3호
• /
• pp.197-219
• /
• 2009

본 연구에서는 문화예술교육 분야 분류체계의 필요성을 인식하고 패싯 기반의 분류 시스템을 설계하게 되었다. 본 연구는 체계적인 방법론을 적용하여 분류시스템을 구축하였고, 국내외 도메인 전문가와 분류전문가가 협력을 통해 분류시스템을 향상시켜 그 결과 13개의 메인 패싯과 다양한 하위 용어를 추출하였다. 본 연구에서 설계된 분류시스템의 목적은 문화예술교육의 다양한 자원을 보다 체계적이고 효율적으로 관리 이용할 수 있는 기반을 마련하는데 있으며 이는 나아가 문화예술교육 분야의 개념에 대한 문화적 격차를 해소시키는데 사용되기를 바란다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.285-289
• /
• 2016

최근 국내에서는 IoT를 기반으로한 신 성장동력 모델들이 기업과 국가기관에 의해 제안되고 있다. 이러한 인터넷 기반의 융합중심 IoT가 현장에 적용되면서 다양한 경제적 가치의 향상과 효율성의 증대등이 현실화될 전망이다. 본 논문에서는 KETI(전자부품연구원)에서 개발 보급중인 oneM2M기반 표준 플랫폼 Mobius와 Gateway용 플랫폼 &Cube, 그리고 저전력, 장거리 RF통신이 가능한 LoRa 통신모듈을 이용하여 현장 적용이 가능한 환경을 구축하여 제안한다.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.155-159
• /
• 2022

Smart livestock, which combines information and communication technology (ICT) with livestock, can be said to be an effective solution to existing livestock problems such as productivity improvement, odors, and diseases. So far, it has hardly been universalized; thus, it is necessary to develop automation devices to reduce labor by localizing automation devices to expand the distribution of ICT technology to farms, and to advance precise specifications and health management technology using biometric information. Weighing scales currently being used in livestock farms are to prevent the spread of diseases by diagnosis and preparation for AI and other diseases in advance, using information on the growing weight of duck breeding. However, accurate values cannot be obtained due to poor breeding conditions. In this paper, we developed a separate data transmission system kit for the weighing scale and placed the sensor on top of the weighing scale so that the sensor wire is not affected by pollutants or ducks on the floor. A display function was provided, and a method of receiving and analyzing the serial port data of the weighing device, and then transmitting them to the data collection server was implemented.

• 대한디지털의료영상학회논문지
• /
• 제12권2호
• /
• pp.81-87
• /
• 2010

The setting parameters of ultrasound scanner give influences to change of image. Sonographers have used a Matlab program to make Low Contrast Sensitivity(LCS) value and compared original images in order to evaluate the use of the supersonic diagnosis machinery. We confirmed the change of image in Grayscale values using Photoshop program. Experiment equipment of our research used A Medison Accuvix V10, A Multi-Tissue Ultrasound Phantom(040 GSE) of CHRIS Company, A Adobe Photoshop CS4 Program, A Convex Probe, A USB memory stick, A Probe Fixation Equipment. The method used Gain, Dynamic Range(DR) of the setting parameters of ultrasound scanner and researched Gain and DR was set to 10 dB. We changed the different settings to see the changes of images using Grayscale values of a Photoshop program about tissue images of a phantom. This study evaluated DR and Gain whether it is an image controller to get the optimum contrast to produce an image to see the how effect on the images. We did not use Gateway in supersonic diagnosis machinery. We can easily open to open the files through Photoshop program before we get Digital Imaging and Communications in Medicine(DICOM) files use USB memory stick in supersonic diagnosis machinery. When we diagnosed the lesion of the patient with ultrasound, the contrast and the Gray scale value of image are very important. In this research, we determined the optimum setting parameters that provided useful information to diagnose disease and evaluated the change of improved images.