• 천문학회보
• /
• 제38권1호
• /
• pp.31.2-31.2
• /
• 2013

We use grid-based hydrodynamic simulations to study star formation in nuclear rings in barred galaxies. The gaseous medium is assumed to be infinitesimally thin, isothermal, and unmagnetized. To investigate various situations, we vary the total gas content in the bar regions and the bar growth time. We find that star formation rate (SFR) in a nuclear ring is determined by the mass inflow rate to the ring rather than the total gas mass in the ring. The SFR shows a strong primary burst and weak secondary bursts at early time, and declines to small values at late time. The primary burst is caused by the rapid gas infall to the ring due to the bar growth, with its duration and peak depending on the bar growth time. The secondary bursts result from re-infall of the ejected gas by star formation feedback of the primary burst. When the SFR is low, ages of young star clusters exhibit an azimuthal gradient along the ring since star formation takes place mostly near the contact points between the dust lanes and the nuclear ring. When the SFR is large, on the other hand, star formation is widely distributed throughout the whole length of the ring, with no apparent age gradient of star clusters. Regardless of SFR, star clusters have a positive radial age gradient, with younger clusters located closer to the ring, since the ring shrinks in size over time.

• 천문학회보
• /
• 제41권1호
• /
• pp.67.3-68
• /
• 2016

We present evidence of the bar driven secular evolution on disks from z~0.8 to z~0.01. Using $3.6{\mu}m$ images of nearby galaxies from the Spitzer Survey of Stellar Structure in Galaxies (S4G) and images from the Cosmological Evolution Survey (COSMOS), we find that barred galaxies show a light deficit in the disk surrounding the bar within the bar radius. We quantify this light deficit and find that galaxies with a stronger bar (longer, higher Bar/T) show a more pronounced light deficit. We examine snapshots from N-body simulations and confirm that as a barred galaxy evolves, the bar becomes longer and the light deficit becomes more pronounced. Theoretical studies have predicted that bars evolve by capturing nearby disk stars and employing them to make the bar more elongated and stronger. Therefore the light deficit in the disk is likely produced by bars, and thus bars play a major role in shaping their host galaxies, redistributing not only the gaseous but also the stellar mass within galaxies, with important consequences to their subsequent evolution.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.343-347
• /
• 2012

충전형 저온 플라즈마 반응기 내에서의 가스 상 시안화합물의 분해특성을 반응기로 투입되는 방전 전력, 시안화합물의 유입농도, 운반기체인 공기의 습도 및 반응기 내의 충전물질 등을 변수로 연구하였다. 저온플라즈마 방전의 경우 시안화합물들의 분해는 트리클로로에틸렌에 비하여 상대적으로 매우 낮은 효율을 보였다. 그러나 플라즈마 방전 영역에 알루미나 또는 백금/알루미나 구슬을 충전한 경우 분해효율이 크게 높아졌으며 이는 플라즈마 반응과 더불어 백금/알루미나의 촉매작용에 의한 촉매 반응이 동시에 작용함에 기인한 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1720-1723
• /
• 2000

Boron doped conducting diamond thin film were grown on Si substrate by microwave plasma chemical vapor deposition from a gaseous feed of hydrogen, acetone/methanol and solid boron. The doping level of boron was controlled from 0ppm to $10^4$ppm (B/C). The Si substrate was tilted ca. 10$^{\circ}$ to make Si substrate have different height and temperature. Experimental results show that same condition but different temperature of Si substrate by height made different crystalline of diamond thin film. There were appeared 3$\sim$4 step of different crystalline morphology of diamond. To characterize the boron-doped diamond thin film, Raman spectroscopy was used for identification of crystallinity. To survey surface morphology, microscope was used. Grain size was changed gradually by different temperature due to different height. The Raman spectrum of film exhibited a sharp peak at 1334$cm^{-1}$, which is characteristic of crystalline diamond. The lower position of diamond film position, the more non-diamond component peak appeared near 1550$cm^{-1}$.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권1호
• /
• pp.25-29
• /
• 2012

The novel type of cable under consideration is cooled by gaseous Helium at elevated pressure. Helium is known for having poor electric breakdown strength; therefore the dielectric capabilities of this type of cable must be tested under conditions similar to the envisaged operation. In order to study the dielectric performance we have designed and built a novel high pressure cryostat rated at 2.17 MPa which has been used for testing model cables of lengths of up to 1 m. The cryostat is an open system where the gas is not re-circulated. This allows maintaining a high purity of the gas. The target temperature range is between 40 K and 70 K. This substantially increases the critical current density of the HTS compared to 77 K, which is the typical temperature of cables cooled by liquid nitrogen. The cryostat presented allows for adjusting the temperature and keeping it constant for the time necessary to run a complete dielectric characterization test. We give a detailed description of the cryostat. Measurements of partial discharge inception voltages as well as the temperature distribution along the model cables as a function of time are presented.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.3045-3048
• /
• 2009

Graphene sheets formed by the reaction of carbon monoxide (CO) with aluminum sulfide ($Al_2S_3$) at reaction temperatures ${\leq}$ 800 $^{\circ}$ were characterized by X-ray diffraction (XRD), Raman spectroscopy, and high-resolution transmission electron microscopy (HRTEM). The graphene sheets, formed as CO was reduced to gaseous carbon by the reaction with $Al_2S_3$, in the temperature range 800 - 1100 $^{circ}C$, did not exhibit their characteristic XRD peaks because of the small number of graphene layers and/or low crystallinity of graphene sheets. Raman spectra of graphene sheets showed that the intensity ratio of the D band to the G band decreased and the 2D band was shifted to higher frequencies with increasing reaction temperature, indicating that the number of graphene layers increased with increasing reaction temperature.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.5-8
• /
• 2010

본 논문에서 연구하고자 하는 분사기는 다단 연소 사이클 엔진 연소기에 적용하는 분사기이다. 본 분사기에서 연료는 접선홀을 통해 와류 형상으로 분무되며, 예연소기에서 생성된 산화제 과잉 가스는 중앙에서 jet의 형태로 공급된다. 이러한 기체-액체 분사기의 상압/고압환경에서의 분무특성 및 분사기의 리세스에 따른 분무특성의 차이를 알아보았다. 이러한 결과들은 향후 다단 연소 사이클 엔진 개발의 기본 데이터로 활용될 수 있을 것이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.529-537
• /
• 1998

Currently as due to the rapid development of industry and increase in population we meet serious problems concerning the shortage and pollution of water. In the country many experts predict a shortage of water approaching 450 million tons by the year 2006. To cope with this serious problem it is necessary to construct desalination plants. In the adoption of a desalination system the most important factor is the cost of fresh water production,. In general LNG is stored in a tank as a liquid state below $-162^{\circ}C$. When it is serviced, however the LNG absorbs energy from a heat source and transforms to a high pressure gaseous state. During this process a huge amount of cold energy accumulated in cooling LNG is wasted. This wasted cold energy can be utilized to produce fresh water by using a sea water freezing desalination system. In order to develop a sea water freezing desalination system and to establish its design technique qualitative and quantitative data regarding the freezing behavior of sea water is required in advance, The goals of this study are to reveal the freezing behavior of sea water is required in advance. The goals of this study are to reveal the freezing mechanisms of sea water to measure the freezing rate and to investigate the freezing heat-transfer characteristics,. The experimental results will provide a general understanding of sea water freezing behavior in a rectangular vessel cooled from above.

• 대한기계학회논문집
• /
• 제19권11호
• /
• pp.2981-2994
• /
• 1995

In order to elucidate the effects of positive pressure gradient on flame properties, structure and stabilization, an experimental study is made on turbulent diffusion flame stabilized by a circular cylinder in a divergent duct flow. A commercial grade gaseous propane is injected from two slits on the rod as fuel. In this paper, stabilization, characteristics and flame structure are examined by varying the divergent angle of duct. Temperature, ion current and Schlieren photographs were measured. It is found that critical divergent angle is expected to be about 8 ~ 12 degree through blow-off velocity pattern to divergent angle and the positive pressure gradient influences the flame temperature, intensity of ion current and eddy structure behind the rod. With the increase of divergent angle, typical temperature of recirculation zone is low but intensity of ion current is high in shear layer behind rod. Energy distributions of fluctuating temperature and ion current signals turn up low frequency corresponding to large scale eddies but high frequency corresponding to small scale eddies as well as low with the increase of divergent angle. Therefore the flame structure becomes a typical distributed-reacting flame.

• 한국분무공학회지
• /
• 제10권4호
• /
• pp.8-15
• /
• 2005

The use of clean gaseous fuels for the purpose of high efficiency and low emission in automotive engines has tendency to increase in order to meet the reinforcing emission regulations and to efficiently utilize limited natural resources. Automotive companies developed and commercialized a LPG liquid injection system, which is mounted on LPLi(Liquid Phase LPG Injection) engines and vehicles based on this research trend. This research examines the biggest problem in LPLi engine, that is, the leakage characteristics of low viscosity LPG fuel according to the injector design variables. This study is also aimed to improve the performance of fuel-leakage in LPLi engine through the addition of a lubrication improver in HFRR(High Frequency Reciprocating Rig) facility. The needle displacement and the spring displacement of an LPLi injector are found to be already optimized. The possibility of a maximum of 70% leakage reduction compared to a conventional case, is verified when 1000ppm of a lubrication improvement material is added and 40% increase of a injector spring constant (K) is applied.