• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.439-444
• /
• 2009

This paper gives a basic Energy performance data of micro gas turbine and Renewable Energy(BIPV and Solar Collector System) installed in Hospital Building. The efficiency of. solar collector and BIPV system was 30%, 10% individually, and lower than micro gas turbines. Micro gas turbines are small gas turbines that bum gaseous and liquid fuels to produce a high-energy exhaust gas and to generate the electrical power. Recently the size range for micro gas turbines is form 30 to 500kW and power-only generation or in combined heat and power(CHP) systems. If micro gas turbine was operated only for electric energy, the efficiency was about 30%, but for combined heat and power, the efficiency was about 90%. Finally, installed in large hospital, Micro gas turbine system was operated to CHP mode, was high-efficiency system than Solar collector and BIPV system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.109-111
• /
• 2002

The fundamental principles of the operation of microwave discharges that are used to convert microwave energy to broad spectrum visual light are known. In this paper, emission dependance of microwave discharges in mixture content of sulfur with noble gases was studied. It is shown that the excitation of this gaseous mixture is carried out in two phases; (1) ionization of noble gas atoms by a microwave field and (2) the consequent maintenance of slightly ionized nonequilibrium plasma by the field. These two processes have essentially various thresholds for the microwave pump. The purpose of this work is to investigate spectral properties of the high frequency discharges in a mixture sulfur vapors with noble gases.

• Nuclear Engineering and Technology
• /
• 제29권1호
• /
• pp.7-14
• /
• 1997

Grain boundary diffusion plays a significant role in fission gas release, which is one of the crucial processes dominating nuclear fuel performance. Gaseous fission produce such as Xe and Kr generated during nuclear fission have to diffuse in the grain lattice and the boundary inside fuel pellets before they reach the open spaces in a fuel rod. These processes can be studied by 'tracer diffusion' techniques, by which grain boundary diffusivity can be estimated and directly used for low burn-up fission gas release analysis. However, only a few models accounting for the both processes are available and mostly handle them numerically due to mathematical complexity. Also the numerical solution has limitations in a practical use. In this paper, an approximate analytical solution in case of stationary grain boundary in a polycrystalline solid is developed for the tracer diffusion techniques. This closed-form solution is compared to available exact and numerical solutions and it turns out that it makes computation not only greatly easier but also more accurate than previous models. It can be applied to theoretical modelings for low bum-up fission gas release phenomena and experimental analyses as well, especially for PIE (post irradiation examination).

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 심포지움시리즈 Jan-96 투과증발막과 응용
• /
• pp.69-90
• /
• 1996

In the chemical industry, in the pharmaceutical industry, and in a number of other industries separation processes are necessary to separate and purify products and raw materials [1,2]. Separation processes are also widely used in other applications such as in recycling valuable materials from waste streams. Unit operations for separation processes can be classified in phase separation techniques and component separation techniques based on the nature of the feed mixtures to be separated. The former techniques are used for the separation of heterogeneous mixtures, in which the feed is already present in two or more separated phases on a micro-scale. The latter are suitable for the separation of homogeneous mixtures such as gaseous mixtures and mixtures of completely miscible liquids. tn these cases the separation into individual components is generally achieved by utilizing the differences in physico-chemical properties of components, and is much more difficult compared to phase separation techniques. Separation processes such as distillation, evaporation, liquid-liquid extraction, and crystallization belong to this class.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.3-11
• /
• 1995

A theoretical model which combines gaseous transport and solid state diffusion was used to study aluminide coating process by pack cementation. The aluminide coatings were applied in the high activity pack containing $NH_4Cl$ activator with Ni substrate under argon atmosphere. On the basis of the process conditions, the suggested model allows the surface composition, the growth rate of coating layers and the aluminium concentration profiles in coatings to be calculated. In the case of $NH_4Cl$ activator, careful consideration was required in the analysis, because activator contains nitrogen and hydrogen as well as halogen element to activate the pack. A good agreement is obtained between the theoretical predictions and the experimental results.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.550-557
• /
• 1997

Production of so-called Halon fire extinguishing agents has been prohibited since January 1994 because of their ozone depletion potential, To replace them, several hydrofluorocarbons and fluorocarbons have been developed and utilized. A number of studies on flame extinguishing concentrations and flammability peak concentrations of them have been done. Although there was enough information for practical purpose, more knowledge on fire extinguishing characteristics of them should be attained for efficient use of them. In this study, peak concentrations of methane/air mixtures with gaseous halogenated hydrocarbons were measured at elevated temperature, because the former studies were done at room temperature and temperature of a fire room can be higher than usual. Measurement was done at $200^{\circ}C$, because measuring system could not endure higher temperature. This study revealed that peak concentrations of halogenated hydrocarbons differed little at elevated temperature. The halogenated hydrocarbons have almost the same fire extinguishing ability as Halon 1301.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2010년도 추계학술발표회 자료집
• /
• pp.99-102
• /
• 2010

가스계 소화설비는 소화약제의 특성상 방호구역내의 누설면적에 민감하게 영향을 받고, 누설면적이 너무 크면 제대로 된 소화성능을 발휘 할 수 없기 때문에 설계 및 시공, 그리고 설치 후 성능 검증 등에 주의가 필요하다. 이전 가스계 소화설비의 성능확인방법으로 종래에는 소화약제 전량을 직접방출하거나 극히 일부 저장용기의 소화약제만을 방출시키는 소위 간이시험을 실시하는 것이 보편적이었으나, 방출시험은 고비용, 일회성 및 시험절차의 난이성, 그리고 환경오염으로 인해 실제 방출시험을 통한 설비의 신뢰성 확인이 어려운 실정이다. 이러한 상황을 감안하여 가스계 소화설비의 성능검증을 위해 Door Fan Test를 활용하는 방안에 대하여 알아보고자 한다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2009년도 춘계학술논문발표회 논문집
• /
• pp.483-486
• /
• 2009

국제사회의 할론계 소화약제 사용규제가 본격화 되면서 차세대 소화약제에 대한 개발은 시급한 사안으로 다가왔다. 그중에서도 청정소화약제에 해당하는 가스계 소화약제의 개발은 상당히 진척되었으며, 가스계 소화약제의 소화성능에 관한 평가는 화재발생시 인명과 재산상의 손실을 최소화하기 위한 중요한 평가요소이다. 본 연구는 기존의 이산화탄소 소화약제와 새로운 형태의 소화약제인 Novec의 소화성능을 비교 평가하기 위해서 Cup Burner Test를 이용하여 실험을 행하였으며, 에탄올, 노르말헵탄, 톨루엔과 가솔린을 원료하여 실험한 결과 Nocvec의 소화성능이 이산화탄소 소화약제보다 우수한 것으로 나타났다.

• 한국표면공학회지
• /
• 제15권4호
• /
• pp.208-217
• /
• 1982

To study the effect of TiC coating on weight change, microhardness, wear and heat - resistance of TiC layer, chemical vapour deposition on the various substrates has been carried out with the gaseous mixture of TiCl4, toluene, and H2 in the temperature range of 900 - 1000$^{\circ}C$. The results obtained are as follows ; (1) There is a limited value of carrier and reductant H2 gas flow rate, above which deteriorate effect on the TiC depoition arises (2) Increased thickness of TiC layer was resulted with increasing temperature and time. Better deposition was obtained with stainless steels and the best results were introduced by cobalt coating of substrates. (3) Wear resistance of the TiC coated specimen improved markedly. Heat resistivity of the coated steel showed excellent result, whereas the coated stainless Steels were infer-ior to the substrate.

• 대한원격탐사학회지
• /
• 제21권3호
• /
• pp.221-228
• /
• 2005

Baekdusan is a Cenozoic stratovolcano in which a series of micro-seismic events and gaseous emissions have been reported in 1990s. Two-pass DInSAR technique was applied to determine displacement in the volcano by using 10 ERS SAR and 41 JERS-1 SAR datasets. Most interferometric phases out of 58 JERS-1 differential interferograms showed concentric fringe patterns that correlated with elevation. From an analysis of fringe-duration relation, the fringe patterns were found to be severely distorted specifically by stratified troposphere. To estimate the tropospheric delay, we used the data in the Sobaeksan located about 20 km away from the summit of Baekdusan. The maximum and mean magnitudes of the phase delay in the Baekdusan were respectively 13.8 cm and 3.8 cm over 1200 m in altitude. After removing tropospheric effects, a mean inflation rate was estimated to be about 3 mm per year from 1992 to 1998. Although the inflation rate of the volcano is inconclusive without ground truth data, the results indicate that there exists slow upward deformation in the Baekdusan volcano.