• 열처리공학회지
• /
• 제11권4호
• /
• pp.305-314
• /
• 1998

This study has been performed to investigate into some effects of various amounts of $CO_2$ and CO gas added to the $50%NH_3-N_2$ based gas atmosphere on microstructure, hardness, chemical analysis and residual stress in the compound and diffusion layer of AISI H13 treated by gaseous nitrocarburising process. The compound layer formed in the surface is composed of mainly ${\varepsilon}-Fe_3$(N,C) and small amount of ${\gamma}^{\prime}-Fe_4N$ and cementite. The maximum hardness value obtainable from H13 steel is shown to be 1200 Hv and the effecvtive hardening depth increases with increasing CO content from 1% to 4%. In the case of CO content over 4%, however, it decreases with increasing CO content. The composition profiles of nitrogen and carbon are found to be within the ${\varepsilon}$-phase field located above the ${\varepsilon}+{\gamma}^{\prime}$ phase field in the Fe-N-C diagram. It is shown that the maximum value of compressive residual stress of H13 steel treated in atmospheres of $50%NH_3-(2,4)%CO_2-N_2-CO$ gas mixture is $48kg/mm^2$ and the depth to which residual stress is in Compressive state is $90{\mu}m$ for the atmosphere $50%NH_3-45%N_2-4%CO_2-1%CO$ gas mixture. It is consequently important to control the maximum value and size of compressive residual stress region in order to obtain desirable mechanical properties.

• 공업화학
• /
• 제9권4호
• /
• pp.595-602
• /
• 1998

소수성부의 탄소수가 12~18인 고급지방산의 알파술폰화반응은 고급지방산 메틸에스테르와 $SO_3$의 몰비가 1:1.3이고, 반응온도 $70{\sim}90^{\circ}C$ 범위에서 불활성 가스와 $SO_3$의 혼합된 기상술폰화 반응에서 97% 이상 높은 수율로 알파술폰화 생성물을 얻었다. 파이롯 제조공정에서 탈색 및 중화 공정에 있어서 공업적 합성공정의 조건을 밝히므로서 공업적 제조 이용에 참고가 되도록 하였다.

• 공업화학
• /
• 제24권6호
• /
• pp.672-675
• /
• 2013

Medium-density fiberboard의 최적 열분해 조건을 찾기 위해 유동층 반응기를 이용하여 다양한 실험조건에서 급속열분해 실험을 수행하였다. 열분해 온도를 $425^{\circ}C$와 $575^{\circ}C$ 사이에서 변화시켰을 때, $525^{\circ}C$에서 최대 바이오오일 수율 52 wt%를 얻을 수 있었다. 열분해 온도가 높을수록 생성되는 바이오오일의 품질이 좋은 것으로 나타났다. 높은 온도에서 열분해 반응을 수행할 경우, 상당한 양의 oxygenates 및 acids 물질들이 분해되고, 대신 aromatics와 phenolics 같은 고부가가치 물질들이 생성되었다. 기체상 생성물의 대부분은 CO와 $CO_2$였다. 열분해 온도가 높을수록 CO와 $C_1-C_4$ 탄화수소 생성량이 많았다.

• 한국수소및신에너지학회논문집
• /
• 제18권2호
• /
• pp.124-131
• /
• 2007

Methane is partially oxidized to produce the syngas by the lattice oxygen of metal oxides in the absence of gaseous oxygen. The present work deals with ferrite including copper component, which does not chemisorb methane, to investigate the suppression of the carbon deposition during the reduction of metal oxides by methane. Iron-based oxides of $Cu_xFe_{3-x}O_4$(X=0.25, 0.5, 1.0) was synthesized by the co-precipitation method. Thermogravimetric Analysis(TGA) was used to observe the isothermal reduction behavior of $Cu_xFe_{3-x}O_4$ and $Fe_3O_4$ at $600-900^{\circ}C$ under methane atmosphere. The crystal structures of reduced specimens were characterized by X-rays powder diffraction(XRD) technique. From the analyses of TGA, it is concluded that the reduction kinetics of $CuFe_2O_4$ was the fastest among $Fe_3O_4$ and $Cu_xFe_{3-x}O_4$(X=0.25, 0.5, 1.0). The X-ray diffraction analyses indicated that $Cu_xFe_{3-x}O_4$ was decomposed to Cu and $Fe_3O_4$ phase at $600^{\circ}C$ and was reduced to Cu and Fe phase at $800^{\circ}C$. $Fe_3O_4$, which was reduced at $900^{\circ}C$, showed Fe, graphite and $Fe_3C$ phases. On the contrary, $Cu_xFe_{3-x}O_4$ does not show the graphite or $Fe_3C$ phases. This results infer that Cu component suppress the carbon deposition on Cu-ferrite.

• 한국수소및신에너지학회논문집
• /
• 제22권1호
• /
• pp.13-20
• /
• 2011

$SO_2$ has been absorbed and separated selectively by an ionic liquid from $SO_2/O_2$ mixture decomposed from sulfuric acid during the thermochemical SI cycle for the water splitting. In order to design and operate high pressure $SO_2/O_2$ separation system, the solubility of $SO_2$ in [EMIm]$EtSO_4$ (1-ethyl-3-methylimidazolium ethylsulfate) has been measured by Magnetic Suspension Balance at high pressure and temperature. Based on the measured solubility, a pressurized separation system was set up and operated. 194 L/h of $SO_2$($SO_2:O_2$=0.65:1) has been separated with 99.85% of $O_2$ at the vent of absorption tower, which is 22.7% of the theoretically ideal capacity of the system. This discrepancy results from the reduced contact between the gaseous $SO_2$ and the ionic liquid. Increased $SO_2$ supply, scale-up of the absorption column, and a faster ionic liquid circulation speed were suggested to improve the separation capacity.

• 한국세라믹학회지
• /
• 제38권9호
• /
• pp.846-852
• /
• 2001

2차원적 몬테 칼로 시뮬레이션을 사용하여, 화학적 기상 반응법에 의한 탄화규소 전환층의 생성에 미치는 온도의 영향을 조사하였다. 화학적 기상 반응법은 실리카의 열탄화 환원법에 근거하며, 흑연 기판의 탄소와 실리카 반응기체와의 화학적 반응에 의하여 탄화규소 전환층을 형성하는 방법이다. 탄화규소는 반응기체의 확산 및 반응과 같은 열적활성화 과정을 통하여 생성되기 때문에 탄화규소 전환층의 형성은 온도에 크게 의존함을 알 수 있다. 본 연구에서는 몬테 칼로법을 사용하여 삼각격자로 배열된 2차원적인 계에서 흑연 기판의 미세 기공을 따라 확산된 반응기체와 탄소와의 반응에 의해서 탄화규소가 형성되는 과정을 시뮬레이션을 행하였다. 반응 온도를 1900K, 2000K, 2100K, 2200K로 조건을 달리하여 시뮬레이션 하였으며, 그 계산 결과를 실험 결과와 비교하여 재현성을 검토하고 탄화규소 전환층의 두께와 화학적 조성 구배에 대한 반응 온도의 영향을 검증하기 위한 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.58-64
• /
• 2007

액체로켓추진시스템에서 추진제 가압시스템은 추진제가 저장되어 있는 탱크의 얼리지 공간에 가압제인 가스를 제어된 압력으로 공급하는 것이다. 이러한 추진제 가압시스템의 가장 중요한 설계변수는 극저온 추진제 탱크 내에 설치된 가압제 탱크에서 토출되는 가압제의 온도이며, 기체 상태인 가압제의 밀도는 토출되는 가압제의 온도에 따라 민감하게 변한다. 이전 연구에서는 상온 가압제와 상온 외부유체 간의 온도 상관성에 대하여 수행되었으며, 본 연구에서는 현재 개발 중인 액체로켓추진 발사체의 가압시스템과 동일한 조건인 극저온 가압제(GHe)와 극저온 외부유체(LOX)를 적용하여 가압제 탱크에서 가압제 토출 시 강하되는 온도 변화를 실험 및 해석을 통하여 고찰하였다.

• 한국추진공학회지
• /
• 제22권3호
• /
• pp.1-7
• /
• 2018

직결형 초음속 연소기 시험 설비를 사용하여 초음속 연소기에 대한 연소 시험을 수행하였다. 설비는 필요한 유동 조건을 모사할 수 있음을 검증하였다. 시험 조건은 유속 마하 2.0, 온도 $915^{\circ}C$, 압력 496 kPa을 15초 동안 모사할 수 있었다. 연소기 모델은 기체 수소를 연료로 사용하여 연료 당량비 0.12에서 점화 및 화염 유지가 가능함을 검증하였다. 이 유동 조건에서 연소 효율은 71%였으며 초음속 유동이 유지되었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.707-712
• /
• 1995

Grain boundary diffusion plays significant role in the fission gas release, which is one of the crucial processes dominating nuclear fuel performance. Gaseous fission products such as Xe and Kr generated inside fuel pellet have to diffuse in the lattice and in the grain boundary before they reach open space in the fuel rod. In the mean time, the grains in the fuel pellet grow and shrink according to grain growth kinetics, especially at elevated temperature at which nuclear reactors are operating. Thus the boundary movement ascribed to the grain growth greatly influences the fission gas release rate by lengthening or shortening the lattice diffusion distance, which is the rate limiting step. Sweeping fission gases by the moving boundary contributes to the increment of the fission gas release as well. Lattice and grain boundary diffusion processes in the fission gas release can be studied by 'tracer diffusion' technique, by which grain boundary diffusion can be estimated and used directly for low burn-up fission gas release analysis. However, even for tracer diffusion analysis, taking both the intragranular grain growth and the diffusion processes simultaneously into consideration is not easy. Only a few models accounting for the both processes are available and mostly handle them numerically. Numerical solutions are limited in the practical use. Here in this paper, an approximate analytical solution of the lattice and stationary grain boundary diffusion in a polycrystalline solid is developed for the tracer diffusion techniques. This short closed-form solution is compared to available exact and numerical solutions and turns out to be acceptably accurate. It can be applied to the theoretical modeling and the experimental analysis, especially PIE (post irradiation examination), of low burn up fission. gas release.

• 약학회지
• /
• 제45권1호
• /
• pp.116-124
• /
• 2001

Nitric oxide is a labile, gaseous, broad spectrum second messenger that used in various tissues and cells. If it is induced by endogenously and exogenously in the neuronal cells, it is able to mediate analgesia or hyperalgesia at the periphery and in the spinal level respectively. This dual role of nitric oxide in the sensory system is very intriguing but has not been fully understood yet. In this experiment, acetylcholine (300 $\mu$g/paw), sodium nitroprusside (600 $\mu$g/paw), and L-arginine (300 $\mu$g/paw) represented antinociceptive effect to noxious topical stimulus, but pronociceptive responses followed by spinally application (20$\mu$g/5$\mu$l, 10$\mu$g/3$\mu$l, 500$\mu$g/5$\mu$l respectively). Calcium ion is critical element which activates nitric oxide synthase, therefore verapamil (300 $\mu$g/paw) and NOS inhibitor (20 mg/kg, L-NAME or L-NOArg) are injected into right hind paw (i.pl.). When verapamil is combined with NOS inhibitors analgesic effects through NO-cGMP pathway are inhibited as compared with ACh alone. Diluted formalin (2.5%), when injected into rats'hind paw (0.05 ml), elicited a biphasic algesic responses and nitric oxide had an analgesic effect on both $A\delta$ and C sensory nerve fibers which manipulate the phases respective1y. Nitric oxides, which produced from constitutive nitric oxide synthase, activated cyclooxygenase-type I and then prostaglandins are produced from them. So, indomethacin and ibuprofen, inhibitors of COX$_1$enzyme, when pretreated intraperitoneally (100 mg/kg) could reduce the hyperalgesic state. From these results, it is possible to imagine that the intrathecally administered NO donors expressed hyperalgesia through both long-term potentiation mechanism and arachidonic acid-prostaglandin cascade.