• 한국가스학회지
• /
• 제2권4호
• /
• pp.7-17
• /
• 1998

본 연구는 화학장치설비중 가압 염소포화액체 저장탱크의 2상흐름 연속누출에 대한 유해위험거리(또는 독성완충거리)를 정량적으로 예측하기 위한 결과영향 모델링 방법론을 개발하기 위한 것이다. 누출원 모델링은 미환경청의 가이드라인에 근거한 정교한 해석방법과 SuperChems 모델의 자체계산에 의하여 각각 수행되었다. 유해위험성 평가에서 법적 독성규제농도로서 사용되는 STEL, IDLH 및 ERPGs (ERPG-2와 ERPG-3) 농도들에 대하여 유해위험거리를 예측하였다. 비상대응계획 수립시 유해위험성 평가의 가이드라인으로 활용하기 위하여 특히 ERPG-2 농도에 대하여 누출원특성 및 기상변화들의 유해위험거리에 미치는 영향을 고찰하였다.

• 한국추진공학회지
• /
• 제7권1호
• /
• pp.57-65
• /
• 2003

본 연구에서는 압축수가 노즐을 통해 급격히 팽창될 때 기액이상류가 플래싱 증발하게 되는 이상류의 임계유동을 Isentropic-Homogeneous-Equilibrium model과 Leung model을 사용해 해석하였다. 그 결과 이상유동은 연속/불연속적 초크로 될 수 있으며, 정체점의 압력이 10Mpa일 경우에는 단상류 유동의 초크현상과 유사한 연속적인 초크현상이 정체점의 아냉각도가 10K이하일 경우에만 발생한다는 것을 알았다.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.941-950
• /
• 2001

A study of counter-current two-phase flow in narrow rectangular channels has been performed. Two-phase flow regimes were experimentally investigated in a 760mm long and 100mm wide test section with 2.0 and 5.0mm gap widths. The resulting flow regime maps were compared with the existing transition criteria. The experimental data and the transition criteria of the models showed relatively good agreement. However, the discrepancies between the experimental data and the model predictions of the flow regime transition become pronounced as the gap width increased. As the gap width increased the transition gas superficial velocities increased. The critical void fraction for the bubbly-to-slug transition was observed to be about 0.25. The two-phase distribution parameter for the slug flow was larger for the narrower channel. The uncertainties in the distribution parameter could lead to a disagreement in slug-to-churn transition between the experimental findings and the transition criteria. For the transition from churn to annular flow the effect of liquid superficial velocity was found to be insignificant.

• 한국분말재료학회지
• /
• 제7권4호
• /
• pp.218-227
• /
• 2000

It is well known that the Cu-Cr alloys are very difficult to be made by conventional sintering methods. This difficulty originates both from limited solubility of Cr in the Cu matrix and from limited sintering temperature due to high vapor pressures of Cr and Cu components at the high temperature. Densification of Cu-50%Cr Powder compacts by conventional Powder metallurgy Process has been studied. Three kinds of sintering methods were tested in order to obtain high-density sintered compacts. Completely densified Cu-Cr compacts could be obtained neither by solid state sintering method nor by liquid phase sintering method. Both low degree of shrinkage and evolution of large pores in the Cu matrix during the solid state sintering are attributed to the anchoring effect of large Cr particles, which inhibits homogeneous densification of Cu matrix and induces pore generation in the Cu matrix. In addition, the effect of undiffusible gas coming from the reduction of Cu-oxide and Cr-oxide was observed during liquid phase sintering. A two-step sintering method, solid state sintering followed by liquid phase sintering, was proved to have beneficial effect on the fabrication of high-dendsity Cu-Cr sintered compacts. The sintered compacts have properties similar to those of commercial products.

• Journal of Applied Biological Chemistry
• /
• 제56권1호
• /
• pp.53-57
• /
• 2013

비료제품에는 의도적 혹은 비의도적으로 농약으로 등록된 indole-3-acetic acid (IAA) 및 indole-3-butyric acid (IBA)성분에 대한 잔류 가능성이 꾸준히 제기되고 있으나, 생장조정제가 아닌 비료제품에서 mg/L 수준의 옥신류 잔류분석법이 마련되어 있지 않았다. 따라서, 본 연구에서는 생체시료에 미량 잔류하는 IAA 및 IBA 분석에 사용되어 온 liquid chromatography-mass/mass spectrometry (LC-MS/MS)와 gas chromatography-MS 기기분석법을 활용하여 농축 액상비료제품에 적용할 수 있는지 조사하였으며, 액상 비료제품에 적용 가능한 정밀기기 분석법을 개발하고자 하였다. 수용액 상태의 시료에서 식물 생장호르몬인 IAA와 IBA를 가장 손쉽게 정제할 수 있는 방법으로 hydrophile-lipophile balance (HLB) solid phase extraction를 활용하였으나, 제한된 조건에서 LC-MS/MS를 통한 정량분석은 적합한 회수율을 확보하지 못하였고, 정성분석만 가능함을 확인하였다. 반면, 비료제품 250배 희석액을 사용하여 HLB 정제, trimethylsilyl chloride을 이용한 methylation을 통한 GC-MS 분석에서는 검출한계 1.4 mg/L과 93-107%의 회수율로 액상 비료제품에서 IAA와 IBA 정량분석법을 확립할 수 있었다.

• 한국분무공학회지
• /
• 제8권4호
• /
• pp.31-38
• /
• 2003

Constant volume combustion chamber has been designed to investigate diesel spray characteristics with Common-Rail injection system to realize high pressure injection. In this study, two methods of measurements, Schlieren shadowgraphy and Mie scattering imaging method ate applied experimentally to study spray form and liquid phase zone in high pressure, high temperature conditions. Diesel fuel is injected at the point which ignited mixture gas is completely burned. The effect of injection pressure, injector hole diameter, ambient gas temperature and density are investigated experimentally.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권1호
• /
• pp.44-50
• /
• 2005

In the present study, the characteristics of upward bubble flow were experimentally investigated in a liquid bath. An electro-conductivity probe was used to measure local volume fraction and bubble frequency. Since the gas was concentrated at the near the nozzle, the flow parameters were high near the nozzle. In general their axial and radial values tended to decrease with increasing distance. For visualization of flow characteristics, a Particle Image Velocimetry (PIV) and a thermo-vision camera were used in the present study. The experimental results showed that heat transfer from bubble surface to water was largely completed within z = 10 mm from the nozzle, and then the temperature of bubble surface reached that of water rapidly. Due to the centrifugal force, the flow was more developed near the wall than at bubble-water plume. Vortex flow in the bottom region was relatively weaker than that in the upper region.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.342-349
• /
• 1988

The characteristics of flow pattern transitions in a horizontal cocurrent gas-liquid flow have been investigated by means of a statistical analysis of instantaneous pressure drop curves at an orifice. The dimensionless intensity of pressure drop fluctuation shows a sudden change during the course of flow transitions, indicating that it may be a good measure to identify the flow regime transitions. The probability density function of the curves feature a unique pattern depending upon the flow regimes and the statistical properties of the PDF also have particular ranges for each flow regime. In conclusion, the statistical analysis of instantaneous pressure drops may be a powerful tool for predicting the flow regime transitions.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2073-2082
• /
• 1991

본 연구에서는 선회유동과 재순환영역이 있는 제한된 동축 분류유동(confined coaxial jet flow)을 갖는 연소기에 대하여 노즐을 통하여 분사된 연료액적의 증발 및 연소, 그리고 주위기체유동에 관한 제반현상을 정상상태 하에서 모사하고자 하는데 그 목적이 있으며 수치계산에 의한 이론적 해석방법으로 기상은 오일러 방식, 액상은 라 그란지 방식을 채택하였고 후술될 증발 및 연소모델을 적용하였다.

• 설비공학논문집
• /
• 제18권10호
• /
• pp.800-810
• /
• 2006

The R-134a flow distribution is experimentally studied for a heat exchanger composed of round headers and 10 flat tubes. The effects of tube protrusion depth as well as mass flux, and quality are investigated, and the results are compared with the previous air-water results. The flow at the header inlet is stratified. For the downward flow configuration, the liquid distribution improves as the protrusion depth or the mass flux increases, or the quality decreases. For the upward configuration, the liquid distribution improves as the mass flux or quality decreases. The protrusion depth has minimal effect. For the downward configuration. the effect of quality on liquid distribution is significantly affected by the flow regime at the header inlet. For the stratified inlet flow, the liquid is forced to rear part of the header as the quality decreases. However, for the annular inlet flow, the liquid was forced to the frontal part of the header as the quality decreased. For the upward flow, the effect of the mass flux or quality on liquid distribution of the stratified inlet flow is opposite to that of the annular inlet flow. The high gas velocity of the annular flow may be responsible for the trend. Generally, the liquid distribution of the stratified inlet flow is better than that of the annular inlet flow. Possible explanation is provided from the flow visualization results.