• The Korean Journal of Food And Nutrition
• /
• v.35 no.3
• /
• pp.185-192
• /
• 2022

This study investigated the volatile flavor components of the essential oil from Chrysanthemum coronarium var. spatiosumBailey. The essential oil obtained from the aerial parts of the plant by the hydrodistillation extraction method was analyzed by gas chromatography and gas chromatography-mass spectrometry. One hundred and one (99.11%) volatile flavor components were identified in the essential oil from the Chrysanthemum coronarium var. spatiosum Bailey. The major compounds were hexanedioic acid, bis(2-ethylhexyl) ester (12.45%), 6.10.14-trimethyl-2-pentadecanone (7.94%), 1-(phenylethynyl)-1-cyclohexanol (6.34%), α-farnesene (5.55%), phytol (4.99%), and α-caryophyllene (4.39%). When the volatile flavor components of Chrysanthemum coronarium var. spatiosum Bailey were classified by functional group, the content was high in the order of hydrocarbons, alcohols, esters, ketones, aldehydes, and phthalides. Sesquiterpene hydrocarbons were the most common hydrocarbons, mainly due to α-farnesene and α-caryophyllene. Among the alcohols, the content of aliphatic alcohols was significantly higher, mainly due to 1-(phenylethnyl)-1-cyclohexanol (6.34%) and phytol (4.99%). The analysis of the volatile flavor components of Chrysanthemum coronarium var. spatiosum Bailey in this study will provide useful information to consumers when purchasing food and to industries using fragrance ingredients.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.444-445
• /
• 2008

This paper reviews the known techniques for diagnosing the condition of OF cable system and improving the service reliability. These tests are periodically achieved and intended to provide indications that the insulation system has deteriorated. One of these tests is analyzing the gas in oil on Oil-filled cable that is well known and widely accepted method. In this paper, this method of analysis and the relevant measurement standards overview and the concrete example of preventing fault incidence by performing this test is introduced.

• 한국해양학회지
• /
• v.20 no.1
• /
• pp.74-82
• /
• 1985

Exposed on the sea, the oils are affected by the combined effects of evaporation, solution, chemical oxidation, and biological decomposition. Therefore the samples were taken after artificial weathering, and they were analyzed by gas chromatography for sulfur and hydrocarbons. The measurement results of gas chromatography have shown characteristic patterns. The peaks of the lower hydrocarbons in pollutant oil decreased with time. But the chromatograms for sulfur compound analysed by FPD showed little changes with lapse of time. The hydrocarbon and sulfur compound analysis by gas chromatography can be effectively used for analyzing oils for comparative identification.

• Economic and Environmental Geology
• /
• v.47 no.3
• /
• pp.265-273
• /
• 2014

Unconventional resources are natural resources which require greater than industry-standard levels of technology or investment to exploit the commercial development. The key point is that unconventional resources are lower quality fuel sources and are not as economically viable as crude oil and conventional gas. Over the past 100 years, Conventional oil and gas has been satisfied with the energy demands. But developing countries such as China and India, the introduction of the developed countries and the surge of energy due to the depletion of unconventional energy resources will be the limelight. According to be analyzed in the academic literature to unconventional gas and oil(2000~2012) by the program of 'web of science', the research activities 402 papers in unconventional gas and 1,581 papers in unconventional oil.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.980-983
• /
• 1999

The contents of sterols and stanols in vegetable oils and mist oil were analyzed by gas chromatography using a capillary column. The total sterol contents showed high values of 0.67~0.89g/100g in corn oil, rice bran oil, red pepper seed oil and sesame oil. Mist oil, a byproduct of soybean oil manufacture, was a suitable raw material for the production of stanol since it showed high sterol content (10.2g/100g). In the hydrogenation of sterol contained in mist oil using Pd catalyst, the effects saponification of oil were examined. The conversion of sterol to stanol was improved by a factor of 4~5 through saponification of oil, compared to the reaction without saponification.

• Tribology and Lubricants
• /
• v.33 no.1
• /
• pp.31-35
• /
• 2017

Recently, international attention has been focused on the development of non-traditional energy resources such as shale gas and oil sands, due to the steep increase in the demand for natural resources. The materials incorporated in an oil gas plant module experience extreme environments, and are prone to various problem such as fracture, corrosion and abrasion due to low-temperature brittleness. In order to improve the plant life, it is necessary to perform characteristics study and performance evaluation of the materials. In particular, this paper explains the main set of materials which are most frequently used in oil sands plant project. In order to investigate wear characteristics, the authors carried out abrasive wear tests of TP 316, stainless steel and SS 400, structural rolled steel. For the analysis of the abrasive wear resistance of an oil sands plant, the authors carried out the test according to ASTM G 105 "Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Test" standard guidelines. The authors have derived the results from the data associated with the loss of mass with respect to wear rate. During the test, for a given wear length for 10,000 revolutions, the rotational speed and applied force of the rubber wheel were varied.

• Mass Spectrometry Letters
• /
• v.2 no.2
• /
• pp.41-44
• /
• 2011

Molecular compositions of two types of heavy oil were studied using positive atmospheric pressure photoionization (APPI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Vacuum gas oil (VGO) was generated from vacuum distillation of atmospheric residual oil (AR), and slurry oil (SLO) was generated from catalytic cracking of AR. These heavy oils have similar boiling point ranges in the range of 210-$650^{\circ}C$, but they showed different mass ranges and double-bond equivalent (DBE) distributions. Using DBE and carbon number distributions, aromatic ring distributions, and the extent of alkyl side chains were estimated. In addition to the main aromatic hydrocarbon compounds, those containing sulfur, nitrogen, and oxygen heteroatoms were identified using simple sample preparation and ultra-high mass resolution FT-ICR MS analysis. VGO is primarily composed of mono- and di-aromatic hydrocarbons as well as sulfur-containing hydrocarbons, whereas SLO contained mainly polyaromatic hydrocarbons and sulfur-containing hydrocarbons. Both heavy oils contain polyaromatic nitrogen components. SLO inludes shorter aromatic alkyl side chains than VGO. This study demonstrates that APPI FT-ICR MS is useful for molecular composition characterization of petroleum heavy oils obtained from different refining processes.

• Korean Journal of Food Science and Technology
• /
• v.20 no.5
• /
• pp.732-735
• /
• 1988

Flavor stability of cooking oils such as rice bran oil, double fractionated palm olefin and soybean oil were determined by headspace analysis using gas chromatography. In the headspace, the contents of volatile compounds, oxygen and hydrogen were measured. The hydrogen content in the headspace correlated well with the contents of volatile compound (r > 0.95). Therefore, it is proposed that a single measurement of hydrogen and oxygen is used as a index of flavor stability of cooking oils instead of separate measurement of volatile compounds and oxygen. which have conventionally been used.

• New & Renewable Energy
• /
• v.19 no.4
• /
• pp.53-60
• /
• 2023

The Computational Fluid Dynamics (CFD) model is a method of studying the flow phenomenon of fluid using a computer and finding partial differential equations that dominate processes such as heat dispersion through numerical analysis. Through CFD, a lot of information about flow disorders such as speed, pressure, density, and concentration can be obtained, and it is used in various fields from energy and aircraft design to weather prediction and environmental modeling. The simulation used for fluid analysis in this study utilized Gexcon's (FLACS) CODE, such as Norway, through overseas journals, for the accuracy of the analysis results through many experiments. It was analyzed that a technology for treating two or more catalysts with physical properties under low-temperature atmospheric pressure conditions could not be found in the prior art. Therefore, it would be desirable to establish a continuous plan by reinforcing data that can prove the effectiveness of producing efficient synthetic oil (renewable oil) through the application that pyrolysis under low-temperature and atmospheric pressure conditions.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.499-504
• /
• 2009

The analysis for furan compound has provided a complementary technique to dissolved gas analysis(DGA) for monitoring transformers when total concentration of CO and $CO_2$ dissolved in oil only has been evaluated the aging of insulating paper. But, the analysis of furanic compounds by high performance liquid chromatography(HPLC) has been important more than DGA recently. Because it has been known that furanic components in transformer oil have come only from the decomposition of insulating paper. Therefore we have manufactured accelerating aging cell which was aged during 60 hours at 100, 150, 180 and $200^{\circ}C$, respectively, for investigating the characteristics of cellulose paper by thermal using analysis for CO, $CO_2$ and furan compound.