• 한국분무공학회지
• /
• 제26권3호
• /
• pp.127-134
• /
• 2021

Fire sprinkler initial spray was analyzed by Large eddy simulation (LES) and Volume of Fluid (VoF) integrated method. The IsoAdvector geometric VoF was used to identify the liquid-gas interface clearly even with the large Courant-Friedrichs-Lewy number. To reduce the computational costs, sector meshes and Adaptive Mesh Refinement up to level 3 were used. Base mesh size was 1 mm, which is roughly equivalent to the initial sprinkler droplet. Top surface radius of boss and deflector size were modified to investigate the effects of sprinkler head design on primary breakup process. When top surface radius of boss was increased, vertical liquid sheet was formed. This phenomenon reduced the sheet breakup radius, sheet thickness and velocity. Due to reduced liquid sheet thickness, a large amount of ligaments was created from the liquid sheet. As a result, there was a dramatic decrease in volume per surface area, indicating an increase in breakup process. Spray pattern viewed in radial direction also changed when top surface radius of boss increased. When top surface radius of boss was increased, a T-shaped pattern was observed while a V-shaped pattern was observed in all other cases. When the deflector size increases, the spray pattern remains V-shaped, even if the top surface radius of boss increased. Further studies on promoting atomization of the water supplied to the lower part of the sprinkler head in the T-shape pattern should be conducted.

• 한국수소및신에너지학회논문집
• /
• 제32권4호
• /
• pp.245-255
• /
• 2021

Various studies about metallic bipolar plates have been conducted to improve fuel cell performance through flow field design optimization. These research works have been mainly focused on fuel cells for vehicle, but not fuel cells for building. In order to reduce the price and volume of fuel cell stacks for building, it is necessary to apply a metallic flow field, In this study, for a metallic flow field applied to a fuel cell for building, the effect of a change in the flow field shape on the performance of a polymer electrolyte membrane fuel cell was confirmed using a model and experiments with a down-sizing single cell. As a result, the flow field using a metal foam outperforms the channel type flow field because it has higher internal differential pressure and higher reactants velocity in gas diffusion layer, resulting in higher water removal and higher oxygen concentration in the catalyst layer than the channel type flow field. This study is expected to contribute to providing basic data for selecting the optimal flow field for the full stack of polymer electrolyte membrane fuel cells for buildings.

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.105-110
• /
• 2019

CNT 유동층 반응기(내경 0.15 m, 높이 2.6 m) 프리보드 내 미세 CNT 입자(평균입도 $46{\mu}m$, 벌크밀도 $93.2kg/m^3$)의 높이 별 거동을 확인하기 위해 레이저 슬릿광 형상 측정법을 이용하여, CNT 응집체의 크기 및 형태를 측정하였다. 기체 유속 증가에 대해, 비산되는 CNT 응집체의 Feret 직경과 Heywood 직경이 증가하였다. 프리보드 내 높이가 증가할수록 평균 직경은 작아졌고, 응집체 내 CNT 입자수가 감소하였다. 기체 유속 증가에 대해, 응집체의 종횡비는 농후상에 가까울수록 증가하였으나, 높은 높이에서는 감소하였다. 그러나, 견고도는 큰 변화를 보이지 않았다. 응집체의 형상 분석 정보에 기반하여, 높이 별 CNT 입자의 응집과정이 서로 다름을 확인하였다. 유동층 프리보드 내 CNT 응집체의 Heywood 직경을 예측할 수 있는 상관관계식을 제안하였다.

• 천문학회보
• /
• 제43권2호
• /
• pp.38.3-38.3
• /
• 2018

We present the results of high-resolution near-IR spectral mapping toward the Orion KL outflow. In this study, we used the Immersion Grating Infrared Spectrometer (IGRINS) on the 2.7 m Harlan J. Smith Telescope at McDonald Observatory. IGRINS's large wavelength coverage over the H & K bands and high spectral resolving power (R ~ 45,000) allowed us to detect over 35 shock-excited ro-vibrational H2 transitions and to measure directly the gas temperature and velocity of the dense outflows. In our previous study toward the H2 peak 1 region in the Orion KL outflow, we identified 31 outflow fingers from a datacube of the H2 1-0 S(1) $2.122{\mu}m$ line and constructed a three-dimensional map of the fingers. The internal extinction (${\Delta}AV$ > 10 mag) and overall angular spread of the flow argue for an ambient medium with a high density (105 cm-3). In this presentation, we show preliminary results of additional mapping toward a remarkable chain of bows (HH 205 - HH 207) farther from the ejection center, and obtain a more clear view of the shock physics of a single isolated bullet that improves on the knowledge gained from observations of the more complex peak 1 region in our earlier study.

• 천문학회보
• /
• 제44권1호
• /
• pp.42.2-42.2
• /
• 2019

Turbulence is one of the natural phenomena in molecular clouds. It affects gas density and velocity fluctuation within the molecular clouds and controls the mode and tempo of star formation. However, despite many years of study, the properties of turbulence remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale (TIMES; PI: Jeong-Eun Lee)", we have fully mapped two star-forming molecular clouds, the Orion A and the Ophiuchus molecular clouds, in 3 sets of lines ($^{13}CO$ J=1-0, $C^{18}O$ J=1-0, HCN J=1-0, $HCO^+$ J=1-0, CS J=2-1, and $N_2H^+$ J=1-0) using the TRAO 14-m telescope. We apply a statistical analysis, Principal Component Analysis (PCA), which can recover an underlying turbulent-power spectrum from an observed P-P-V spectral map. We compare turbulence properties not only between the two clouds, but also between different parts within each cloud. We present the first result of our observation program.

• 한국추진공학회지
• /
• 제25권2호
• /
• pp.42-54
• /
• 2021

Aft-deck은 가스터빈 배기 플룸을 차폐하거나, 제트를 확산하여 외부 공기와 혼합율을 증가시켜 배기가스의 온도를 저감하기 위한 용도로 최신 무인항공기에 적용되고 있다. 본 연구에서는 Aft-deck의 설계 변수에 따라 노즐의 성능이 어떻게 영향을 받는지 알아보고자 하였다. Aft-deck의 설계 변수로는 길이, 확산각, 상부 덱 형상으로 선정하였으며, 길이 변수에 따른 추력과 차폐율 간의 상관관계를 제시하였다. 그리고 확산 각도의 범위에 따라 노즐 추력과 제트 확산에 대한 상관관계를 제시하였다. 또한, 상부 덱 제거를 통해 추력 향상 효과를 확인하였으며, 횡 방향 속도 벡터의 특성이 외부 유동과의 혼합 성능을 결정하는 것을 알게 되었다.

• Computers and Concrete
• /
• 제30권6호
• /
• pp.421-432
• /
• 2022

Recently, the interminable ozone depletion and the global warming concerns has led to construction industries to seek for construction materials which are eco-friendly. Regarding this, Geopolymer Concrete (GPC) is getting great interest from researchers and scientists, since it can operate by-product waste to replace cement which can lead to the reduction of greenhouse gas emission through its production. Also, compared to ordinary concrete, geopolymer concrete belongs improved mechanical and durability properties. In spite of its positive properties, the practical use of geopolymer concrete is currently limited. This is primarily owing to the scarce structural, design and application knowledge. This study investigates the Mechanical and Durability of Geopolymer Concrete Containing Fibers and Recycled Aggregate. Mixtures of elastoplastic fiber reinforced geopolymer concrete with partial replacement of recycled coarse aggregate in different proportions of 10, 20, 30, and 40% with natural aggregate were fabricated. On the other hand, geopolymer concrete of 100% natural aggregate was prepared as a control specimen. To consider both strength and durability properties and to evaluate the combined effect of recycled coarse aggregate and elastoplastic fiber, an elastoplastic fiber with the ratio of 0.4% and 0.8% were incorporated. The highest compressive strength achieved was 35 MPa when the incorporation of recycled aggregates was 10% with the inclusion of 0.4% elastoplastic fiber. From the result, it was noticed that incorporation of 10% recycled aggregate with 0.8% of the elastoplastic fiber is the perfect combination that can give a GPC having enhanced tensile strength. When specimens exposed to freezing-thawing condition, the physical appearance, compressive strength, weight loss, and ultrasonic pulse velocity of the samples was investigated. In general, all specimens tested performed resistance to freezing thawing. the obtained results indicated that combination of recycled aggregate and elastoplastic fiber up to some extent could be achieved a geopolymer concrete that can replace conventional concrete.

• 수산해양기술연구
• /
• 제59권1호
• /
• pp.44-54
• /
• 2023

In this study, the second-order Nomoto's nonlinear expansion model was implemented as a Tagaki-Sugeno fuzzy model based on the heading angular velocity to design the automatic steering system of a ship considering nonlinear elements. A Tagaki-Sugeno fuzzy PID controller was designed using the applied fuzzy membership functions from the Tagaki-Sugeno fuzzy model. The linear models and fuzzy membership functions of each operating point of a given nonlinear expansion model were simultaneously tuned using a genetic algorithm. It was confirmed that the implemented Tagaki-Sugeno fuzzy model could accurately describe the given nonlinear expansion model through the Zig-Zag experiment. The optimal parameters of the sub-PID controller for each operating point of the Tagaki-Sugeno fuzzy model were searched using a genetic algorithm. The evaluation function for searching the optimal parameters considered the route extension due to course deviation and the resistance component of the ship by steering. By adding a penalty function to the evaluation function, the performance of the automatic steering system of the ship could be evaluated to track the set course without overshooting when changing the course. It was confirmed that the sub-PID controller for each operating point followed the set course to minimize the evaluation function without overshoot when changing the course. The outputs of the tuned sub-PID controllers were combined in a weighted average method using the membership functions of the Tagaki-Sugeno fuzzy model. The proposed Tagaki-Sugeno fuzzy PID controller was applied to the second-order Nomoto's nonlinear expansion model. As a result of examining the transient response characteristics for the set course change, it was confirmed that the set course tracking was satisfactorily performed.

• 천문학회보
• /
• 제45권1호
• /
• pp.43.2-44
• /
• 2020

We have carried out high-resolution near-infrared (NIR) spectroscopic observations toward 16 Galactic supernova remnants (SNRs) showing strong H2 emission features. A dozen bright H2 emission lines are clearly detected for individual SNRs, and we have measured their central velocities, line widths, and fluxes. For all SNRs except one (G9.9-0.8), the H2 line ratios are well consistent with that of thermal excitation at T~2000 K and their line widths are broader than ~10 km s-1, indicating that the H2 emission lines are most likely from shock-excited gas and therefore that they are physically associated with the remnants. The kinematic distances to the 15 SNRs are derived from the central velocities of the H2 lines using a Galactic rotation model. We derive for the first time the kinematic distances to four SNRs: G13.5-0.2, G16.0-0.5, G32.1-0.9, G33.2-0.6. Among the rest 11 SNRs, the central velocities of the H2 emission lines for six SNRs are well consistent (±5 km s-1) with those obtained in previous radio observations, while for the other five SNRs (G18.1-0.1, G18.9-1.1, Kes 69, 3C 396, W49B), they are significantly different. We discuss the velocity discrepancies in these five SNRs. In G9.9-0.8, the H2 emission shows non-thermal line ratios and very narrow line width (~4 km s-1), and we discuss its origin.

• 공업화학
• /
• 제18권2호
• /
• pp.155-161
• /
• 2007

본 연구에서는 $SnO_2-ZrO_2$(Sn/Zr = 2/1) 촉매 상에서의 CO에 의한 $SO_2$ 환원반응에 대한 반응온도, 공간속도, [CO]/[$SO_2$] 몰비 등의 반응조건의 최적화를 위한 반응특성을 조사하였다. $300{\sim}550^{\circ}C$의 반응온도, $5000{\sim}30000cm^3/g_{-cat}{\cdot}h$의 공간속도, 1.0~4.0 의 [CO]/[$SO_2$] 몰비 등 다양한 반응조건 범위에서 CO에 의한 $SO_2$ 환원반응에 대한 영향을 살펴본 결과, 최적 반응조건으로 반응온도, 공간속도, [CO]/[$SO_2$] 몰비는 각각 $325^{\circ}C$, $10000cm^3/[g_{-cat}{\cdot}h]$, 2.0이었다. 이 때 $SO_2$ 전환율은 약 99% 이상이었으며, 원소 황 선택도는 95% 이상이었다. 또한 CO에 의한 $SO_2$ 환원반응에서 수분에 대한 영향을 조사한 결과, 수분함량이 2.0~6.0 vol%인 범위에서 수분의 함량이 높을수록 $SO_2$ 전환율 및 원소 황 선택도가 감소됨과 동시에 반응성이 저하됨을 알 수 있었다. 2 vol%의 수분이 함유된 반응조건에서 반응온도와 [CO]/[$SO_2$] 몰비를 각각 $300{\sim}400^{\circ}C$ 및 1.0~3.0으로 변화시킨 결과, 반응온도와 [CO]/[$SO_2$] 몰비가 각각 $340^{\circ}C$와 2.0인 조건에서 가장 높은 반응성을 얻었다. 이 때 $SO_2$ 전환율이 약 90%였으며, 원소 황 선택도는 약 87%였다