• 한국토양비료학회지
• /
• 제28권2호
• /
• pp.183-190
• /
• 1995

논포장에서 배출되는 메탄가스를 측정하기 위하여 간이폐쇄정태 chamber법을 이용하여 대표적인 시료를 채취할 수 있도록 chamber내 시료채취 높이, 시료채취시 시간간격, 하루중 시료 채취시간을 검토하였다. 1. 대표적인 시료채취를 위한 chamber내 높이는 65cm이었고 chamber 하반부에서 시료가 균일하게 섞이도록 DC fan을 추가로 설치할 필요성이 인정되었다. 2. 시간경과에 따른 chamber내 메탄농도의 변화 및 기온의 변화에서 보면 시료채취를 개시하여 30분이내에 시료를 채취하는 것이 바람직하였다. DC fan으로 chamber내부의 공기가 섞이도록 하는 것은 대표적인 시료를 얻기 위한 것 뿐 아니라 chamber내열평형을 이루어 시료(試料) 채취기간중(採取期間中) 식물(植物)의 생리적(生理的) 활성(活性)에 최소한(最小限)의 변화를 주는 방법으로 판단되었다. 3. 하루중 대표적인 메탄 배출량을 나타내는 오전 9시~12시에 시료를 채취하여 분석하되 부득이한 경우에는 또 하나의 평균적인 배출량을 나타내는 오후 6시~8시의 시료를 채취하여 분석하여도 가능할 것으로 판단되었다. 4. 수도주간(水稻株間)진 토양(土壤)에서 메탄 배출을 측정하는데 사용하는 소형의 chamber는 토양을 교란할 수 있으므로 설치한 후 최소한 6시간이 경과되어야 chamber내 메탄농도가 주위의 메탄 농도로 회복되었다.

• 한국기후변화학회지
• /
• 제7권4호
• /
• pp.427-432
• /
• 2016

Nitrous oxide is one of the main sources of greenhouse gases and its concentration has increased from 273 ppb in 1,750 to 315 ppb in 2005. Specially, nitrogen fertilizer used in agricultural soils is considered as an important source of atmospheric $N_2O$ emission. This study was conducted to estimate the difference of nitrous oxide emission as chamber position on furrow and ridge and crop existence in gas sampling chamber on upland. Four treatments used in this experiment were (1) no-fertilizer without crop in chamber on ridge, (2) fertilizer application without crop in chamber on ridge, (3) fertilizer application with crop in chamber on ridge, (4) fertilizer application without crop in chamber on ridge and furrow. Nitrous oxide emission at fertilizer application with crop in chamber on ridge were the highest while were the lowest at no-fertilizer without crop in chamber on ridge. There was no significant difference of nitrous oxide emission by chamber position, but total emission by crop existence in chamber was significant difference. Therefore, in order to estimate greenhouse gases emission using chamber method in upland, it should be considered in correlation with crop existence in chamber and characteristic changes like as the soil moisture, microbial flora by crop growth stage.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.149-154
• /
• 2007

The engine behavior in a transient condition is important to not only emission regulations but also fuel economy. A fast response gas analyzer can be a useful tool to investigate exhaust gas in a transient operation. It should be designed to analyze gas concentration with a short time constant by a fast sampling module and an appropriate measuring method for each emission element. In this study, a new fast sampling module is introduced and flow analysis is performed by numerical simulation. The analysis has shown the proper operating condition and the sensitivity of the module for practical application. Calculated flow to the sampling module has $0.5{\sim}4%$ error, while backflow toward the expansion tube is expected when pressure in CP (Constant Pressure) chamber is over 0.6 bar. For a stable supply of flow to the optical cell, sample gas pressure should be in the range, $0.35{\sim}1.90$ bar, when the pressure in the CP camber and the optical cell are 0.2 bar and 0.158 bar, respectively.

• 오토저널
• /
• 제13권3호
• /
• pp.25-31
• /
• 1991

The formation process of hydrocarbon emissions was investigated in SI engine. The time- resolved concentrations of hydrocarbon emissions were measured using a high gas sampling valve and a gas chromatography. The gas was sampled at exhaust port, or the position of spark plug, or the wall of combustion chamber. The experiments were conducted using the Alpha engine of Hyundai Motor Company. The fuel used was methanol or propane. It was found that the effect of the quenching layer of combustion chamber wall on hydrocarbon emissions was not significant. The increasing rate of hydrocarbon concentration at combustion chamber wall near crevice and oil layer after flame was reached was much higher than that at the position of spark plug. The hydrocarbon concentrations at exhaust port had two peak values just after opening exhaust valve and just before closing it.

• 한국환경농학회지
• /
• 제13권3호
• /
• pp.359-372
• /
• 1994

A simplified closed static chamber method was devised for measurement of methane flux from paddy fields. Compared to automatic methane measuring system(AMMS) this chamber method provides availability with moderate costs of setup and maintenance, while it also provides the time-effectiveness compared to other closed top-type chamber method. It accomodates 30 chambers within 2 hours sampling period with two persons. And it provide a rapid and accurate analysis of methane, 30-40 samples per hour. Modified method for $N_2O$ measurements provides a precise and accurate analysis of nitrous oxide without upgrading additional heating zones for gas sampling(switching) valves.

• 한국환경농학회지
• /
• 제39권3호
• /
• pp.228-236
• /
• 2020

BACKGROUND: The closed chamber method is the most commonly used for measuring greenhouse gas emissions from rice fields. This method has the advantages of being simple, easily available and economical. However, a measurement result using the chamber method is an estimated value and is complete when the uncertainty is estimated. The methane emissions from a rice paddy account for the largest portion of the greenhouse gas emissions in the agriculture sectors. Although assessment of uncertainty components affecting methane emission from a rice paddy is necessary to take account of dispersion characteristics, research on these uncertainty components is very rare to date. The goal of this study was to elucidate influencing factors on measurement uncertainty of methane concentrations measured by a closed automated chamber system from a rice paddy. METHODS AND RESULTS: The methane sampling system is located in the rice paddy in Gyeonggi-do Agricultural Research and Extension Services (37°13'15"N, 127°02'22"E). The primary measurement uncertainty components influencing methane concentrations (influencing factors) investigated in this research were repeatability, reproducibility and calibration in the aspects of methane sampling and analytical instrumentation. The magnitudes of the relative standard uncertainty of each influencing factor were quantified and compared. CONCLUSION: Results of this study showed what influencing factors were more important in determination of methane concentrations measured using the chamber system and analytical instrumentation located in the monitoring site. Quantifying the measurement uncertainty of the methane concentrations in this study would contribute to improving measurement quality of methane fluxes.

• 한국토양환경학회지
• /
• 제3권3호
• /
• pp.75-86
• /
• 1998

쓰레기매립장에서 복토층을 통하여 대기중에 유출하는 가스를 현장에서 단시간내에 측정이 가능한 밀폐형 chamber법을 제시하였다. 또한, 최종복토층에서의 유출가스 실측치를 모델해석으로 모사하여 다음의 결과를 얻었다. 1) 시간변화에 따른 chamber내(H=10-30 cm)의 농도 변화는 30분이내로, G.C의 분석시간을 고려하여 5분단위로 분석한다. 2)메탄산화 반응의 영향으로 $CH_4$/$CO_2$비가 복토층 표면근처에서 급격히 변화한다. 3)매립지 표면의 flux가 F =$10^{-5}$mol/($m^2$.s)일 경우에는 메탄산화반응에 의해 가스조성에의 영향이 있으나, F =$10^{-6}$moll($\textrm{m}^2$.s)의 경우에는 복토층내의 메탄가스 농도가 상대적으로 적으므로 메탄산화반응에의 영향이 적다.

• 한국환경농학회지
• /
• 제39권3호
• /
• pp.237-245
• /
• 2020

BACKGROUND: The closed chamber method is the most commonly used for measuring greenhouse gas emissions from upland fields. This method has the advantages of being simple, easily available and economical. However, uncertainty estimation is essential for accurate assessment of greenhouse gas emissions and verification of emission reductions. The nitrous oxide emissions from upland field is very important for the nitrogen budget in the agriculture sectors. Although assessment of uncertainty components affecting nitrous oxide emission from upland field is necessary to take account of dispersion characteristics, research on these uncertainty components is very rare to date. This study aims at elucidation of influencing factors on measurement uncertainty of nitrous oxide concentrations measured by an automated open closed chamber method from upland field. METHODS AND RESULTS: The nitrous oxide sampling system is located in the upland field in Gyeonggi-do Agricultural Research and Extension Services (37°13'22"N, 127°02'22"E). The primary measurement uncertainty components influencing nitrous oxide concentrations (influencing factors) investigated in this research are repeatability, reproducibility and calibration in the aspects of nitrous oxide sampling and analytical instrumentation. The magnitudes of the relative standard uncertainty of each influencing factor are quantified and compared. CONCLUSION: Results of this study show what influencing factors are more important in determination of nitrous oxide concentrations measured using the automated open closed chambers located in the monitoring site. Quantifying the measurement uncertainty of the nitrous oxide concentrations in this study would contribute to improving measurement quality of nitrous oxide fluxes.

• 한국연초학회지
• /
• 제18권2호
• /
• pp.170-176
• /
• 1996

This paper describes the generation and decay phenomena of gas, vapor and particulate phase components of environmental tobacco smoke in 18 m3 controlled experimental atmosphere chamber. Real time-weighted average concentration ratios of markers were determinated at no ventilation rates and sampling durations of starting to smoking 45 min. Average concentration of major ETS markers was no significant on the mainstream smoke contents of commercial cigarette and decay ratios were dependent on first order kinetic. RSP/nicotine, solanesol and 3-EP were good predictors of ETS concentration in the public indoor field. The concentration ratio of vapor phase and particulate phase components is highly variable to assessment of indoor air quality with ETS. Key words : ETS, chamber study, ETS markers.

• Journal of Korean Society for Atmospheric Environment
• /
• 제22권E1호
• /
• pp.1-8
• /
• 2006

The purpose of this study was to evaluate the efficiency of a passive sampler in measuring atmospheric ammonia concentrations using chamber system. The ability of the passive sampler to quantitatively determine atmospheric ammonia gas was almost identical to that of the reference method (indophenol method). There was no significant difference between concentrations measured by the two methods. The detection and quantification limits of the ammonia passive sampler were 16.9 ppb and 25.3 ppb, respectively, for a 24-h sampling period. The average coefficient of variation between replicated samplers was $6.7{\pm}4.2%$. The concentrations measured by the two methods (passive sampler and indophenol method) were no significant difference with good a correlation (correlation coefficient=0.964).