• 한국가스학회지
• /
• 제22권4호
• /
• pp.39-48
• /
• 2018

가스리프트(gas lift) 설계 영향인자인 오일 조성과 주입가스 조성에 따라 해저 오일 저류층(offshore oil reservoir) 내 가스리프트 최적 설계를 수행하였다. 이를 위해 오일의 API 비중에 따라 구축된 저류층 모델을 이용하여 생산 시뮬레이션을 수행하였다. 저류층의 지속적인 생산성 감소 시, 가스리프트 적용에 의한 오일 생산증진효과가 크게 나타남을 확인하였다. 생산정 모델을 이용하여 가스리프트 반응곡선을 분석한 결과, 오일의 API 비중이 감소하고 주입가스의 비중이 증가할수록 생산량 증진에 필요한 주입 가스량이 높게 산출되었다. 다중밸브를 이용하여 가스리프트 최적 설계를 수행하였으며, 단일밸브 설계와 비교했을 때 가스 주입심도 감소로 인해 상대적으로 낮은 주입압력으로도 가스리프트 공법 운영이 가능하였다. 저류층 모델과 생산정 모델을 연계하여 가스리프트 적용에 따른 오일 생산증진을 분석한 결과, API 비중이 낮은 중질유 저류층에 천연가스를 주입했을 때 가스리프트에 의한 생산효율이 극대화될 수 있다.

• 한국가스학회지
• /
• 제26권5호
• /
• pp.1-9
• /
• 2022

적합한 인공채유법의 선정은 유정의 효율적인 운영과 경제성의 측면에서 중요하다. 일반적으로 인공채유법의 선정은 유정 설계에 포함되는 과정이며, 저류층의 상황이나 유정의 생산 조건에 따라 두 가지 이상의 인공채유법을 적용한 혼합시스템을 활용하여 오일생산량을 증가시킬 수 있다. 대표적인 인공채유법 중 하나인 전기공저펌프(Electric submersible pump, ESP)는 전기 에너지를 이용한 다단계 원심분리형 펌프를 이용하여 유정 하부에서 압력을 공급하는 방식으로 오일생산량을 증대시킨다. 그러나 이 방식은 펌프의 수명과 연관된 결함에 의해 적용 기간에 한계를 가지는 단점이 있다. 이에 전기공저펌프/가스리프트 혼합시스템(ESP/Gas lift hybrid system)을 적용하여 전기공저펌프의 결함 발생 시에는 바로 가스리프트로 전환하여 오일생산이 중단되는 시간을 감소시킬 수 있다. 본 연구에서는 퍼미안 분지에 있는 육상 수평정을 대상으로 전기공저펌프/가스리프트 혼합시스템을 적용했을 때의 생산 중단시간의 감소에 따른 오일생산량 차이 및 경제성 분석을 수행하였다. 전기공저펌프/가스리프트 혼합시스템은 전기공저펌프의 단독 적용에 비교하여 더욱 효율적인 오일 생산성을 나타냄을 확인하였다. 또한 이 연구에서는 혼합시스템을 적용했을 때 얼마나 경제적 이득이 있는지를 정량적으로 예측함을 나타냈다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.551-554
• /
• 2006

Inhibition of propellant temperature rising in liquid propulsion rocket using cryogenic fluid as a propellant is very important. Especially propellant temperature rising during stand-by after filling and pre-pressurization can bring into cavitation in turbo-pump. One of the method preventing propellant temperature rising in cryogenic feeding system is recirculating propellant through the loop composed of propellant tank, feed pipe, and recirculation pipe. The circulation of propellant is promoted through gas-lift effect by gas injection to lower position of recirculation pipe. In this experiment liquid oxygen and gas helium is used as propellant and injection gas. Under atmospheric and pressurized tank ullage condition, helium injection flow-rate is varied to observe the variation of recirculating flow-rate and propellant temperature in the feed pipe. There is appropriate helium injection flow-rate for gas-lift recirculation system.

• 한국자동차공학회논문집
• /
• 제17권4호
• /
• pp.93-100
• /
• 2009

Intake/exhaust valve timing and exhaust cam lift were changed to control the internal exhaust gas recirculation (IEGR) and combustion phase of homogeneous charge compression ignition (HCCI) engine. To measure the IEGR rate, in-cylinder gas was sampled during from intake valve close to before ignition start. The lower exhaust cam made shorter valve event than higher exhaust cam and made IEGR increase because of trapping the exhaust gas. IEGR rate was more affected by exhaust valve timing than intake valve timing and increased as exhaust valve timing advanced. In-cylinder pressure was increased near top dead center due to early close of exhaust valve. Ignition timing was more affected by intake valve timing than exhaust valve timing in case of exhaust valve lift 8.4 mm, while ignition timing was affected by both intake and exhaust valve timing in case of exhaust valve 2.5 mm. Burn duration with exhaust valve lift 2.5 mm was longer than other case due to higher IEGR rate. The fuel conversion efficiency with higher exhaust valve lift was higher than that with lower exhaust valve lift. The late exhaust and intake maximum open point (MOP) made the fuel conversion efficiency improve.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.7-13
• /
• 2010

To satisfy the needs on fuel economy and engine performance, continuous variable valve lift systems are applying to engines. In the CVVL system, fuel economy can be improved by reducing pumping loss during the induction process, and engine performance can be also improved by controlling volumetric efficiency and the residual gas fraction. Because the residual gas fraction directly affects volumetric efficiency, engine performance, combustion efficiency and emissions in SI engines, controlling residual gas fraction is one of the important things in engine development process. This analysis investigates the residual gas fraction and volumetric efficiency with changes of intake valve lifts and intake valve timings. In this study, unsteady state solutions were solved during exhaust and induction processes. Results show variation of the residual gas fraction and volumetric efficiency by changing intake valve timing and lift. Decreasing intake valve lift leads to increase the residual gas fraction and to decrease volumetric efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.398-404
• /
• 1999

The EGR is needed for one of various strategies to reduce NOx emission. But to get the proper EGR rate the intake and exhaust system become complicated. That is a reason why we consider using the built0in EGR system. The built-in EGR is a system which reduces Nox by controling the residual gas fraction in cylinder by changing valve timing and valve lift of intake and exhaust. In this paper characteristics of volumetric efficiency and residual gas fraction in cylinder were investigated for various engine speeds by changing valve timing and valve lift of intake and exhaust. In this paper characteristics of volumetric efficiency and residual gas fraction in cylinder were investigated for various engine speeds by changing valve timing and valve lift of intake and exhaust in the 4 stroke-cycle diesel engine. Volumetric efficiency and residual gas fraction were calculated by the method of characteristics. As the results the possibility of suing the built-in EGR system was confirmed.

• 한국미생물·생명공학회지
• /
• 제22권6호
• /
• pp.659-664
• /
• 1994

In order to predict gas hold-up and oxygen transfer rate during sisomicin fermentation employing air lift fermentor, simulated media similar to fermentation broths in rheological proper- ties were prepared and used. Rheological properties of fermentation broths from 40 hours and 60 hours of cultivation were analyzed by applying to Power's Law equation. Regardless of addition and no addition of MgSO$_{4}$, the tendencies, that n value was decreased and K value was increased as aeration rate was increased, were shown. Simulated media of twelve different fermentation broths were formulated in a range of 0.7 to 2.1% CMC, and the values of gas hold-up and k$_{L}$a depending on superficial air velocity were measured using these simulated media. And the relation- ships, $\varepsilon$=$\alpha$U$_{Gr}$$\beta$, K$_{L}$a=$\gamma$U$_{Gr}$$\delta$ were obtained, and these equations are thought to be used to predict the values of gas hold-up and k$_{L}$a during fermentation.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.28-36
• /
• 2001

In this study, a zero-dimensional two zone model is developed to investigate the effects of valve overlap period and valve lift on combustion and gas exchange process in SI engine. The simulation results show that the predicted data has good agreements with experimental ones. The useful information of combustion and gas exchange process such as residual gas fraction, cylinder pressure, mass flow rate and volumetric efficiency can be obtained and the effects of engine variables on combustion processes and performances can be evaluated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권2호
• /
• pp.252-258
• /
• 1999

As an effective means to convey crushed materials from seabed to on board ship and to raise hazardous or abrasive liquids air-lift pump provides a reliable mechanism due to its simple config-uration and easy-to-operate principle. The present study is focused on fundamental investigation of related performance by the analysis program based on the gas-liquid two-phase flow in circular pipes. The program covers pump operating in isothermal and vertical two-phase flow with Newto-nian liquids. it is summarized as important result that an optimum air mass flow rate exists for the maximum lifted liquid mass flow rate in terms of a given submergence rates and furthermore attachment of downcomer gives little effects on riser performance the conveyed liquid flow rate increases with larger submergence rate.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.82-88
• /
• 2001

The EGR is needed fur one of various strategies to reduce NOx emission. But to get the proper EGR rate, the intake and exhaust system become complicated. That is a reason why we consider using the internal EGR system. The internal EGR is a system which reduces NOx by controling the residual gas fraction in cylinder by changing valve timing and valve lift of intake and exhaust. In this paper, characteristics of volumetric efficiency and residual gas fraction in cylinder were investigated for various engine speeds by changing valve timing and valve lift of intake and exhaust in the 4 stroke-cycle diesel engine. Volumetric efficiency and residual gas fraction were calculated by the method of characteristics. As the results, residual gas fraction and volumetric efficiency in cylinder by variable valve timing were visualized.