• 한국가스학회지
• /
• 제27권1호
• /
• pp.33-37
• /
• 2023

기후변화 문제를 해결하기 위한 각국의 노력은 계속되고 있고, 친환경 연료로의 전환은 지속적으로 진행해야 할 인류의 과제이다. 국내에서는 최근 재생에너지자원이 비교적 풍부한 제주도에서 재생에너지와 연계한 그린수소를 생산하는 기술을 실증하기 위하여 준비 중이며, 본 연구에서는 국내외 기술현황을 파악 후 해외선진기업의 고분자 전해질 수전해 장치를 도입하여 적용하는 것을 목표로 하고 있다. 본 연구를 진행하면서 국외에서 제작되는 수전해 장치에 대하여 국내안전규제에 부합한 시스템 도입과정과 핵심부품의 평가방법을 소개하고자 한다.

• 한국가스학회지
• /
• 제21권1호
• /
• pp.87-93
• /
• 2017

본 연구는 과대불판 사용 사고 예방을 위한 안전기준 도입에 따라 이동식부탄연소기 구조에 따른 열영향을 분석하기 위해 수행하였다. 삼발이 높이가 다른 연소기와 용기 장착부 덮개 안쪽에 방열판을 설치한 연소기를 활용해 불판, 연소기의 용기 장착부 덮개 및 부탄용기의 온도를 측정하였다. 그리고 불판 및 화염의 열영향에 의한 온도 변화 경향을 분석하였다. 본 실험 범위에서 이동식부탄연소기 사용 중 안전장치가 작동하지 않는, 즉 안전하게 이동식부탄연소기를 사용할 수 있는 조건은 불판과 용기 장착부 덮개의 거리가 약 28 mm 이상이라고 파악되었다. 이에 비해 불판과 용기 장착부 덮개의 거리가 현저히 낮으면 불판의 열영향 뿐만 아니라 화염의 열영향이 직접적으로 부탄용기에 줄 수 있어 사고의 위험성이 크다고 판단된다. 또한 용기 장착부 덮개 안쪽에 방열판 설치 시 불판과 화염의 열영향 감소 효과가 있지만 부탄용기 과열에 따른 폭발 사고 위험성이 존재한다고 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 지하공간 건설기술에 관한 서울 심포지움 논문집
• /
• pp.133-162
• /
• 1993

The environment of underground spaces might be considered in view of working environment during the construction and living environment after completion of the construction work. For controlling environment of underground space, an appropriate measures have to be taken on the governing factors such as air flow, dust, gases, heat, radiation, noise, illumination and water. The more critical matter, in underground environmental point of view, is underground disasters such as fire, gas explosion and water inrush. This paper presents the general introduction of these factors mentioned above and some outcomes of research works as of now.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.67-67
• /
• 2012

Graphene, two-dimensional one-atom-thick planar sheet of carbon atoms densely packed in a honeycomb crystal lattice, exhibits fascinating electrical properties, such as a linear energy dispersion relation and high mobility in addition to a wide-range optical absorption and high thermal conductivity. Graphene's outstanding tensile strength allows graphene-based electronic and photonic devices to be flexible, bendable, or even stretchable. Recently many groups have reported high performance electronic and optoelectronic devices based on graphene materials, i.e. field-effect transistors, gas sensors, nonvolatile memory devices, and plasmonic waveguides, in which versatile properties of graphene materials have been incorporated into a flexible electronic or optoelectronic platform. However, there are several fundamental or technological hurdles to be overcome in real applications of graphene in electronics and optoelectronics. In this tutorial we will present a short introduction to the basic material properties and recent progresses in applications of graphene to electronics and optoelectronics and discuss future outlook of graphene-based devices.

• Earthquakes and Structures
• /
• 제12권1호
• /
• pp.47-54
• /
• 2017

Introduction of robustness index in the structure is done in three ways: deterministic robustness index, probabilistic robustness index, and risk-based robustness index. In past decades, there have been numerous researches to evaluate robustness index in both deterministic and probabilistic ways. In this research, by using a risk analysis, a risk-based robustness index has been defined for the structure. By creating scenarios in accordance with uncertainty parameters of critical and unexpected gas blast accident, a new method has been suggested for evaluating risk-based robustness index. Finally, a numerical example for the evaluation of risk-based robustness index of a four-storey reinforced concrete moment frame, designed and built based on Eurocode 8 code, has been presented with results showing a lower risk of robustness.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.192-198
• /
• 2004

A numerical study was conducted to determine the effects of high temperature air, including equivalent ratio on flow field, temperature, evaporation, and overall temperature distribution in gas turbine combustor. A sector model of a typical wall jet can combustor, featuring introduction of primary air and dilution air via wall jet, was used in calculations. Flow field and temperature distribution were analyzed. Operating conditions such as inlet temperature and overall equivalent ratio were varied from 373 to 1300 K, and from 0.3 to 0.6, respectively, while any other operating conditions were fixed. The RNG ${\kappa}-{\varepsilon}$ model and eddy breakup model were used for turbulence and combustion model respectively. It was found that the increase with the inlet air temperature, velocity in the combustor is accelerated and evaporation of liquid fuel is not affected in primary zone, high temperature inlet air enhances the evaporation and improves overall temperature distribution factor.

• 대한안전경영과학회지
• /
• 제16권1호
• /
• pp.201-206
• /
• 2014

GCM(Green Chain Management) is being spread by that companies which apply with eco-friendly concept in entire SCM(Supply Chain Management) perspective is being increased for resolving some recent environmental problems. There are reasons that numerous companies focus on GCM. At first various governments began to directly manage components and material contents about various noxious substances. Second, environment problem management in the entire logistics process from procurement of product materials to distribution of product became to be important according to introduction of certification system that evaluate the environmental impact throughout life-cycle of products. Purposes of this paper are 1) to analyze the GCM process whose important is more increasing in the recent logistics environment change, 2) to comprehend places and sources that generate environmental elements like energy consumption and greenhouse gas emissions in elements of logistics function, and 3) to construct integrated GCM system for observing activity of logistics function throughout life-cycle of products.

• 한국항공운항학회지
• /
• 제23권4호
• /
• pp.36-41
• /
• 2015

The cyclone separator is a simple device, which causes the centrifugal separation of materials such as droplets or particles in a fluid stream. The cyclone separator utilizes the energy obtained from fluid pressure and linear motion to create rotational fluid motion. This rotational motion leads the materials suspended in the fluid to separate from the fluid quickly due to the centrifugal force. The rotation is produced by the tangential or involuted introduction of fluid into the vessel. These materials may be droplets of fuel in blow-by gas through an engine. Droplets suspended in the feed liquid may separate according to size, shape, or density. And the change of part dimension in a cyclone separator can yield the its performance variation. The current study shows the influence of design parameters on the performance of a cyclone separator for blow-by gas.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.286-288
• /
• 2014

This study deals with the catalyst free radio frequency plasma assisted polymerization of ethylene glycol using nitrogen as reactive gas to modify the surface chemistry and morphology. The deposited film was characterized through various analysis techniques i.e. surface profilometry, Forier transform infrared spectroscopy, water contact angle and UV-visible spectroscopy to analyze film thickness, chemical structure, surface energy and optical properties respectively. The surface topography was analyzed by Atomic force microscopy. It was observed that the ethylene oxide behaviour and optical transmittance of the film were reduced with the introduction of nitrogen gas due to higher fragmentation of monomer. However the hydrophilic behavior of the film improved due to formation of new water loving functional groups suitable for biomedical applications.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 추계학술대회
• /
• pp.275-290
• /
• 2013

The main cause of building fire fatalities occur in the combustible material heat, smoke and toxic gases are. Building interior decoration, etc., especially as much of the harmful substances generated during combustion, and, used in domestic architecture wallpaper, ceiling, and other plastics, built-in foam insulation also analyzed recognition of fire hazards approach to test the conkalrorimiteo test, choedaeyeolbangchulryul through, chongbal heat, mass loss rate, generates carbon monoxide gas hazard ratio tests, analysis and evaluation rigid foam index testing the toxicity of hazardous material generated by performing a gas clean up and assess the material test results, the minimum order to provide data to quantify the risk of fire. Ensure fire safety of building materials, composite materials in order to test the various risk factors could be considered organic to the introduction of testing and evaluation is needed urgently.