• 제목/요약/키워드: Gas adsorption efficiency

검색결과 125건 처리시간 0.028초

운전조건에 따른 O3/UV, TiO2/UV 및 O3/TiO2/UV 시스템의 BTEX 증기처리에 관한 비교 연구 (A Comparative Study on Degradation of BTEX Vapor by O3/UV, TiO2/UV, and O3/TiO2/UV System with Operating Conditions)

  • 김경진;박옥현
    • 한국대기환경학회지
    • /
    • 제24권1호
    • /
    • pp.91-99
    • /
    • 2008
  • A multilayer tower-type photoreactor, in which $TiO_2$-coated glass-tubes were installed, was used to measure the vapor-phase BTEX removal efficiencies by ozone oxidation ($O_3$/UV), photocatalytic oxidation ($TiO_2$/UV) and the combination of ozone and photocatalytic oxidation ($O_3/TiO_2$/UV) process, respectively. The experiments were conducted under various relative humidities, temperatures, ozone concentrations, gas flow rates and BTEX concentrations. As a result, the BTEX removal efficiency and the oxidation rate by $O_3/TiO_2$/UV system were highest, compared to $O_3$/UV and $TiO_2$/UV system. The $O_3/TiO_2$/UV system accelerated the low oxidation rate of low-concentration organic compounds and removed organic compounds to a large extent in a fixed volume of reactor in a short time. Therefore, $O_3/TiO_2$/UV system as a superimposed oxidation technology was developed to efficiently and economically treat refractory VOCs. Also, this study demonstrated feasibility of a technology to scale up a photoreactor from lab-scale to pilot-scale, which uses (i) a separated light-source chamber and a light distribution system, (ii) catalyst fixing to glass-tube media, and (iii) unit connection in series and/or parallel. The experimental results from $O_3/TiO_2$/UV system showed that (i) the highest BTEX removal efficiencies were obtained under relative humidity ranging from 50 to 55% and temperature ranging from 40 to $50^{\circ}C$, and (ii) the removal efficiencies linearly increased with ozone dosage and decreased with gas flow rate. When applying Langmuir-Hinshelwood model to $TiO_2$/UV and $O_3/TiO_2$/UV system, reaction rate constant for $O_3/TiO_2$/UV system was larger than that for $TiO_2$/UV system, however, it was found that adsorption constant for $O_3/TiO_2$/UV system was smaller than that for $TiO_2$/UV system due to competitive adsorption between organics and ozone.

원소-도핑 광촉매를 활용한 저농도 황화 이메틸 및 이황화 이메틸의 제어 (Control of Low-Level Dimethyl Sulfide and Dimethyl Disulfide by Applying Element-Doped Photocatalysts)

  • 신명희;조완근
    • 한국환경과학회지
    • /
    • 제18권11호
    • /
    • pp.1215-1224
    • /
    • 2009
  • This study evaluated the applicability of visible-light-driven N- and S-doped titanium dioxide($TiO_2$) for the control of low-level dimethyl sulfide(DMS) and dimethyl disulfide(DMDS). In addition, a photocatalytic unit(PU)-adsorption hybrid was evaluated in order to examine the removal of DMS and DMDS which exited the PU and a gaseous photocatalytic byproduct($SO_2$) which was generated during the photocatalytic processes. Fourier-Tranform-Infrared(FTIR) spectrum exhibited different surface characteristics among the three-types of catalysts. For the N- and S-doped $TiO_2$ powders, a shift of the absorbance spectrum towards the visible-light region was observed. The absorption edge for both the N- and S-doped $TiO_2$ was shifted to $\lambda$ 720 nm. The N-doped $TiO_2$ was superior to the S-doped $TiO_2$ in regards to DMS degradation. Under low input concentration(IC) conditions(0.039 and 0.027 ppm for DMS and DMDS, respectively), the N-doped $TiO_2$ revealed a high DMS removal efficiency(above 95%), but a gradual decreasing removal efficiency under high IC conditions(7.8 and 5.4 ppm for DMS and DMDS, respectively). Although the hybrid system exhibited a superior characteristic to PU alone regarding the removal efficiencies of both DMS and DMDS, this capability decreased during the course of a photocatalytic process under the high IC conditions. The present study identified the generation of sulfate ion on the catalyst surface and sulfur dioxide(maximum concentrations of 0.0019 and 0.0074 ppm for the photocatalytic processes of DMS and DMDS, respectively) in effluent gas of PU. However, this generation of $TiO_2$ would be an insignificant addition to indoor air quality levels.

알코올모델용액을 이용한 여러 종류 활성탄의 휘발성화합물 흡착특성 (Characteristics of Volatile Compound Adsorption from Alcoholic Model Solution onto Various Activated Carbons)

  • 박승국;이명수;김병호;김대옥
    • 산업식품공학
    • /
    • 제14권3호
    • /
    • pp.249-255
    • /
    • 2010
  • 4가지 서로 다른 소재(대나무, 목재, 피탄, 석탄)로 제조된 10가지 활성탄에 대해서, 30% 알코올모델용액에 용해되어 있는 6가지 휘발성화합물(isoamyl alcohol, hexanal, furfural, ethyl lactate, ethyl octanoate, 2-phenyl ethanol)의 흡착효율을 평가하였다. 이들 6가지 휘발성화합물은 알코올음료에서 종종 발견되며, 농도가 높을 경우에는 숙취의 원인이 될 뿐만이 아니라 위스키나 보드카와 같은 술에서 이취의 원인물질이 되기도 한다. 6가지 휘발성화합물이 용해되어 있는 30% 알코올모델용액 200 mL에 0.2 g의 활성탄을 넣고 16시간 일정한 속도로 교반한 후에 처리된 용액을 2가지 시료처리방법(direct liquid injection and headspace-solid phase microextraction)을 이용 GC분석을 수행하여 활성탄의 제거효율을 구하였다. 활성탄의 제거효율은 휘발성화합물의 종류와 활성탄제조의 소재에 따라 차이가 있었으며, ethy octanoate, 2-phenyl ethanol, hexanal에 대한 제거율은 34-100%로 높은 편이나, isoamyl alcohol, ethyl lactate, furfural의 제거율은 5-13%로 비교적 낮은 편이었다. 활성탄의 종류에 따른 제거율은 대나무활성탄인 A가 isoamly alcohol, hexanal, ethyl lactate, furfural 등 대부분의 휘발성화합물에 대해서 유의적으로 높았으며(p < 0.05), 특히 알코올음료에서 숙취와 이취물질이며 fusel oil의 주성분인 isoamyl alcohol, aldehydes(hexanal, furfural), 2-phenyl ethanol에 대한 흡착효율이 높은 것으로 확인되었다.

대기중의 암모니아 및 암모늄염의 필터포집법에 관한 연구 (Study on the Filter Collection Methods of Ammonia and Ammonium Salts in the Atomosphere)

  • 김희강;교본방일;이용근
    • 대한화학회지
    • /
    • 제26권1호
    • /
    • pp.36-42
    • /
    • 1982
  • 대기중의 암모니아가스와 암모늄염의 필터포집법에 관하여 연구하였다. 표준가스 발생장치로 발생시킨 암모니아가스를 3% 붕산-25% 글리세린 혼합액이 스며든 유리섬유 필터에 포집하였다. pH조절법으로 발생시킨 암모니아가스와 대기중의 암모니아를 5회씩 포집하여 측정한 결과 포집효율은 각각 96.4${\pm}$ 2.15%와 97.4${\pm}$1.06%였다. 시판되는 유리섬유 필터 및 Polycarbonate 필터에 대하여 암모니아가스의 흡착 및 탈리현상을 검토한 결과 유리섬유 및 석영 섬유 필터에서는 암모니아가스의 흡착과 약간의 암모늄염이 탈리되었으나, Polycarbonate 필터는 대기중의 암모늄염을 포집하는데 적합한 것으로 판단되었다. 지름 47mm의 필터에 20l/min의 유량으로 60분동안 대기를 포집하여 인도페놀법에 의한 분광광도법으로 측정 할 경우, 측정가능한 암모니아가스의 최저농도는 0.83ppb (약 0.63$\mug$/$m^3$)이다. 이 방법은 종래의 용액포집법에 의한 분광광도 측정법에 비하여 감도가 20배나 높으므로 대기중의 암모니아 농도의 변화를 단시간(약 60분)내에 측정할 수 있다.

  • PDF

Morphology-dependent Nanocatalysis: Rod-shaped Oxides

  • Shen, Wenjie
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.130-131
    • /
    • 2013
  • Nanostructured oxides are widely used in heterogeneous catalysis where their catalytic properties are closely associated with the size and morphology at nanometer level. The effect of particle size has been well decumented in the past two decades, but the shape of the nanoparticles has rarely been concerned. Here we illustrate that the redox and acidic-basic properties of oxides are largely dependent on their shapes by taking $Co_3O_4$, $Fe_2O_3$, $CeO_2$ and $La_2O_3$ nanorods as typical examples. The catalytic activities of these rod-shaped oxides are mainly governed by the nature of the exposed crystal planes. For instance, the predominant presence of {110} planes which are rich in active $Co^{3+}$ on $Co_3O_4$ nanorods led to a much higher activity for CO oxidation than the nanoparticles that mainly exposed the {111} planes. The simultaneous exposure of iron and oxygen ions on the surface of $Fe_2O_3$ nanorods have significantly enhanced the adsorption and activation of NO and thereby promoted the efficiency of DeNOx process. Moreover, the exposed surface planes of these rod-shaped oxides mediated the reaction performance of the integrated metal-oxide catalysts. Au/$CeO_2$ catalysts exhibited outstanding stability under water-gas shift conditions owing to the strong bonding of gold particle on the $CeO_2$ nanorods where the formed gold-ceria interface was resistant towards sintering. Cu nanoparticles dispersed on $La_2O_3$ nanorods efficiently catalyzed transfer dehydrogenation of primary aliphatic alcohols based on the uniue role of the exposed {110} planes on the support. Morphology control at nanometer level allows preferential exposure of the catalytically active sites, providing a new stragegy for the design of highly efficient nanostructured catalysts.

  • PDF

Breakthrough behaviour of NBC canister against carbon tetrachloride: a simulant for chemical warfare agents

  • Srivastava, Avanish Kumar;Shah, D.;Mahato, T.H.;Singh, Beer;Saxena, A.;Verma, A.K.;Shrivastava, S.;Roy, A.;Yadav, S.S.;Shrivastava, A.R.
    • Carbon letters
    • /
    • 제13권2호
    • /
    • pp.109-114
    • /
    • 2012
  • A nuclear, biological, chemical (NBC) canister was indigenously developed using active carbon impregnated with ammoniacal salts of copper (II), chromium (VI) and silver (I), and high efficiency particulate aerosol filter media. The NBC canister was evaluated against carbon tetra chloride ($CCl_4$) vapours, which were used as a simulant for persistent chemical warfare agents under dynamic conditions for testing breakthrough times of canisters of gas masks in the National Approval Test of Respirators. The effects of $CCl_4$ concentration, test flow rate, temperature, and relative humidity (RH) on the breakthrough time of the NBC canister against $CCl_4$ vapour were also studied. The impregnated carbon that filled the NBC canister was characterized for surface area and pore volume by $N_2$ adsorption-desorption isotherm at liquid nitrogen temperature. The study clearly indicated that the NBC canister provides adequate protection against $CCl_4$ vapours. The breakthrough time decreased with the increase of the $CCl_4$ concentration and flow rate. The variation in temperature and RH did not significantly affect the breakthrough behaviour of the NBC canister at high vapour concentration of $CCl_4$, whereas the breakthrough time of the NBC canister was reduced by an increase of RH at low $CCl_4$ vapour concentration.

토양 혼합여재를 이용한 질소산화물 제거특성 (Removal Characteristics of NOx Using a Mixed Soil-Biofilter)

  • 조기철;신은상;황경철;조일형;이내현;여현구
    • 환경위생공학
    • /
    • 제21권3호
    • /
    • pp.15-26
    • /
    • 2006
  • As traffic in city-centre around the world continues to increase, so levels of atmospheric pollutants continue to rise. High concentrations of NOx can have negative effects on human health, and we must find new ways to reduce their levels in the air we breathe. Nitrogen oxide gas (NOx), consisting of nitrogen monoxide (NO) and nitrogen dioxide $(NO_2)$ produced using $O_3$ oxidation, at a low concentration corresponding to that on roads as a result of exhaust from automobiles, was carried out to evaluate the removal characteristics of NOx through a laboratory-scale biofilter packed with soil as a packing material. A mixture media (yellow soil (30%): soil (40%): compost (10%): a used briquet (20%)) was applied. After about 1day of operation, the removal efficiency for $NO_2$ in all experiments with a constant condition ($25^{\circ}C$ and water humidity (60%)) was over 98%. The retention times of the section between phase I and phase II for formation and reduction of $NO_3$ NO and $NO_2$ on the initial $NO_3$ concentration was 50min $(O_3:195\;ppb),\;55min\;(O_3:925\;ppb),\;65min\;(O_3:1743\;ppb),\;70min\;(O_3:2616\;ppb),\;75min\;(O_3:3500\;ppb)$, respectively The soil biofilter system is a unique technology that purifies urban air by utilizing the natural processes that take place in the soil. Although some of the processes are quite complex, they can broadly be summarized as adsorption onto soil particles, dissolution into soil pore water, and biochemical.

커피찌꺼기의 효율적인 열화학 전환을 위한 전이 금속 기반 첨가제 효율 평가 (Efficiency Evaluation of Transition Metal-Based Additives for Efficient Thermochemical Conversion of Coffee Waste)

  • 조동완;장정윤;김선준;임길재
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제27권1호
    • /
    • pp.17-24
    • /
    • 2022
  • This work examined the effect of mixing transition metal-based additives [FeCl3, Fe-containing paper mill sludge (PMS), CoCl2·H2O, ZrO2, and α-Fe2O3] on the thermochemical conversion of coffee waste (CW) in carbon dioxide-assisted pyrolysis process. Compared to the generation amounts of syngas (0.7 mole% H2 & 3.0 mole% CO) at 700℃ from single pyrolysis of CW, co-pyrolysis in the presence of Fe- or Zr-based additives resulted in the enhanced production of syngas, with the measured concentrations of H2 and CO ranging 1.1-3.4 mole% and 4.6-13.2 mole% at the same temperature, respectively. In addition, α-Fe2O3 biochar possessed the adsorption capacity of As(V) (19.3 mg g-1) comparable to that of ZrO2-biochar (21.2 mg g-1). In conclusion, solid-type Fe-based additive can be highly considered as an efficient catalyst to simultaneously produce syngas (H2 & CO) as fuel energy resource and metal-biochar as sorbent.

효소 고정화막의 응용에 대한 총설 (Zeolite Based Membrane for Removal of Ammonium: A Review)

  • 이주엽;라즈쿠마 파텔
    • 멤브레인
    • /
    • 제32권3호
    • /
    • pp.173-180
    • /
    • 2022
  • 음용수 속 암모니아의 존재는 인간의 건강에 매우 해롭다. 농작물에서의 비료 사용, 산업 폐수, 화석 연료의 연소와 같은 활동으로 인해 가용성 암모니아는 지하수를 오염시킨다. 물에 존재하는 암모니아 농도가 낮더라도 해양생물 등의 수생환경을 훼손한다. 막 기술은 암모니아를 물로부터 효과적으로 제거하기 위한 매우 중요한 과정이다. 평평한 시트 막, 막 접촉기, 그리고 막 증류법은 암모니아를 제거하여 물을 정화하는 데 사용되는 방법들 중 하나이다. 막 접촉기는 막 증류법과는 달리 상변화 없이 액체와 가스 간의 또는 액체와 액체간의 질량 전달을 통해 암모니아를 제거하는 효율적인 공정이다. 다만 이 방법은 pH가 매우 높아 암모니아 제거에 비용이 많이 든다. 제올라이트는 우수한 이온 교환 능력을 가지고 있는데, 이는 암모니아와의 상호작용을 향상시켜 폐수로부터 흡착하는 능력을 향상시킨다. 제올라이트를 함유한 혼합 매트릭스 막은 암모니아 흡착 및 폐수로부터의 분리 효율을 향상시킨다. 이 리뷰에서는 위에서 소개된 내용이 자세히 논의될 것이다.

Comparative Analysis of the Phyto-compounds Present in the Control and Experimental Peels of Musa paradisiaca used for the Remediation of Chromium Contaminated Water

  • Kaniyappan, Vidhya;Rathinasamy, Regina Mary;Manivanan, Job Gopinath
    • Mass Spectrometry Letters
    • /
    • 제13권4호
    • /
    • pp.166-176
    • /
    • 2022
  • Banana peels are also widely used as bio-adsorbent in the removal of chemicals contaminants and heavy metals from water and soil. GC-MS plays an essential role in the phytochemical analysis and chemo taxonomic studies of medicinal plants containing biologically active components. Intrinsically, with the use of the flame ionization detector and the electron capture detector which have very high sensitivities, Gas chromatography can quantitatively determine materials present at very low concentrations and most important application is in pollution studies. In the present study banana peels were used as bio-adsorbent to remediate the heavy metal contaminated water taken from three different stations located around the industrial belts of Ranipet, Tamilnadu, India. The AAS analysis of the samples shows a decrement of chromium concentration of 98.93%, 96.16% and 96.5% in Station 1, 2 and 3 respectively which proves the efficiency of the powdered peels of Musa paradisiaca. The GC-MS analysis of the control and treated peels of Musa paradisiaca reveals the presence of phytochemicals like Acetic Acid, 1-Methylethyl Ester, DL-Glyceraldehyde Dimer, N-Hexadecanoic Acid, 3-Decyn-2-Ol, 26-Hydroxy, Cholesterol, Ergost-25-Ene-3,5,6,12-Tetrol, (3.Beta.,5.Alpha.,6.Beta.,12.Beta.)-, 1-Methylene-2b-Hydroxymethyl-3, and 3-Dimethyl-4b-(3-Methylbut-2-Enyl)-Cyclohexane in the control banana peels. The banana peels which were used for the treatment reveals the changes and alteration of the phytochemicals. It is concluded that the alteration in phytochemicals of the experimental banana peels were due to adsorption of chromium heavy metal from the sample.