• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.17-27
• /
• 2016

The need for storage and transportation facilities of liquefied natural gas have increased significantly because of global environmental regulations and recent shale gas innovation in North America. There is severe competition between Korea, Japan, and China for receiving manufacturing orders of LNG carriers or LNG storage tanks. Rationalization of the welding process used in the manufacturing of LNG facilities plays an important role in the above competition. This review paper presents the current global status and tendency for the development of latest welding technologies for LNG storage and transportation facilities. This article intends to present materials for raising the domestic competitive power for receiving manufacturing orders of LNG facilities.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.5
• /
• pp.213-219
• /
• 2017

This study investigated the thermal conductivity of $CO_2$ gas mixtures in order to ascertain the effects of particular impurities in $CO_2$ in pipeline transportation. We predicted the thermal conductivity of three $CO_2$ gas mixtures ($CO_2+N_2$, $CO_2+H_2S$, and $CO_2+CH_4$) by utilizing three different methods : Chung et al., TRAPP, and the REFPROP model. We validated predictions by comparing the estimated results with 216 experimental data for $CO_2+CH_4$, $CO_2+N_2$, and $CO_2+C_2H_6$. Following $CO_2$ transportation conditions, we observed that the model developed by Chung et al. showed the lowest mean deviation of 3.07%. Further investigations were carried out on the thermal conductivity of $CO_2$ gas mixtures based on the Chung et al. model including the effects of the operation parameters of pressure, temperature, and mole fraction of impurities.

• Korea Trade Review
• /
• v.47 no.1
• /
• pp.1-12
• /
• 2022

This study analyzes FCEV among measures to respond to climate change policies. In particular, it proposes alternatives to solve this problem in the trade industry, which relies on transportation sectors with high greenhouse gas emissions such as exports and imports of goods. Therefore, when FCEV is introduced in the transportation sector, changes in CO2 emissions, a greenhouse gas, and changes in logistics costs for changes in CO2 emissions are set through scenarios to evaluate the impact on product trade, such as imports and exports. As a result, the increase in logistics costs due to carbon dioxide emissions affected the import and export volume of goods, and when FCEV was introduced, the export volume would increase by up to 5.6%, and the import volume by up to 30%. In addition, CO2 emissions decreased to about 60% in 2050. Therefore, the introduction of FCEV in the transportation sector will greatly contribute to increasing sales in the trading industry and will be able to solve environmental problems such as greenhouse gas reduction.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.4
• /
• pp.266-273
• /
• 2008

Natural gas hydrates are ice-like solid substances, which are composed of water and natural gas, mainly methane. They have three kinds of crystal structures of five polyhedra formed by hydrogen-bonded water molecules, and are stable at high pressures and low temperatures. They contain large amounts of organic carbon and widely occur in deep oceans and permafrost regions. Therefore, they are expected as a potential energy resource in the future. Especially, $1m^3$ natural gas hydrate contains up to $172Nm^3$ of methane gas, de pending on the pressure and temperature of production. Such large volumes make natural gas hydrates can be used to store and transport natural gas. In this study, three-phase equilibrium conditions for forming natural gas hydrate were numerically obtained in pure water and single electrolyte solution containing 3 wt% NaCl. The results show that the predictions match the previous experimental values very well, and it was found that NaCl acts as an inhibitor. Also, help gases such that ethane, propane, i-butane, and n-butane reduce the hydrate formation pressure at the same temperature.

• Journal of Sensor Science and Technology
• /
• v.27 no.1
• /
• pp.47-54
• /
• 2018

In this paper, we describe the thermal characteristics of the output voltages of ethanol gas sensor according to the amount of radiation incident on the infrared sensors located at each focal point of two elliptical waveguides. In order to verify the output characteristics of the gas sensor according to the amount of incident light on the infrared sensor, two combinations of sensor modules were fabricated. Hydrophobic thin film is deposited on one of the reflectors of sensor modules and one of the two infrared sensors was equipped with a hollow disk (10 Ø), and the temperature characteristics of the infrared sensor equipped with the hollow disk (10 Ø) and the infrared sensor without the disk were tested. The temperature was varied from 253 K to 333 K at 10 K intervals based on 298 K. The properties of ethanol gas sensor have been identified with respect to varying temperature for a range of ethanol concentration from 0 ppm to 500 ppm. In the case of an infrared sensor equipped with a hollow disk (10 Ø), the output voltage of the sensor decreased by 0.8 mV and 1 mV, respectively, as the temperature increased. Conversely, the output voltage of the diskless infrared sensor showed an average increase of 67 mV and 57 mV as the temperature increased. The ethanol concentrations estimated on the basis of results show an error of more than 10 % for less than 100 ppm concentration. However, if the ethanol concentration exceeds 100 ppm, the gas concentration can be estimated within the range of ${\pm}10%$.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.294-299
• /
• 2018

This article describes the output properties of non-dispersive infrared carbon dioxide($CO_2$) sensors resulting from the changes in ambient temperatures. After the developed sensor module was installed inside the gas chamber, the temperature was set to 267 K, 277 K, 300 K, and 314 K, and the concentrations of $CO_2$ gas were increased from 0 to 5,000 ppm. Then, the output voltage at each concentration was obtained. Through these experimental results, two observations were made. First, both the $CO_2$ sensor and the reference sensor showed an increase in the output voltages as the temperature rose from 0 ppm, Second, the full scale outputs of the $CO_2$ sensor grew as the temperature increased. The output characteristics were analyzed based on two factors: change in the radiant energy of the infrared light source and change in the absorptivity of $CO_2$ gas according to the ambient temperature. Additionally, temperature compensation methods were discussed.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.28-34
• /
• 2018

Recently, various engineering approaches have been widely used in the accident investigation field to identify the cause of the accident and to predict damage by accident. Computational analysis is the most commonly used method of accident investigation technique. This technique is mainly used to identify the mechanism of the accident generation and to determine the cause when it is difficult to reproduce the situation at the time of the accident or when it is impossible to perform a reproduction experiment. In this study, The computational fluid dynamics analysis for nitrogen asphyxiation accident generated by defect of building structural between diffusion outlet and cooling tower was performed to determine the inflow path of the suffocation gas, death possibility by concentration of suffocation gas and predicted the time of death due to the accident using 3D modeling and FLACS program. We can quantify diffusion concentration of asphyxiation gas and predict mechanism of death occurrence by accident and evaluate the consequence Analysis through this study. In the future, This method can be widely used in the field of gas safety by improving the reliability and validity of the analysis.

• Journal of Environmental Impact Assessment
• /
• v.21 no.2
• /
• pp.255-264
• /
• 2012

The present study attempts to understand the emission pattern of greenhouse gases in people's daily life through the estimation and analysis of the amount and characteristics of the greenhouse gases. Based on the survey of 1,000 people throughout the nation, monthly emission of greenhouse gases per-capita was estimated from their use of fuels, electricity, water, and personal and public transportation means in addition to their waste generation. In the case of personal car drivers, greenhouse gas emission was the greatest from their cars, followed by the emission from electricity, fuels, and public transportation. Emission from water consumption and waste generation was relatively low. Fuel consumption varied depending on the number of household members, their housing type, and the size of their living spaces. Results showed that single-person households emitted the largest amount of per-capita greenhouse gas while greenhouse gas emission from electricity was inversely proportional to the number of persons in a given household.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.5
• /
• pp.538-548
• /
• 2018

The thermo-acoustic instability in the combustion process of a gas turbine is caused by the interaction of the heat release mechanism and the pressure perturbation. These acoustic vibrations cause fatigue failure of the combustor and decrease the combustion efficiency. This study is to develop a segmented dynamic thermo-acoustic model to understand combustion instability of gas turbine. Therefore, this study required a dynamic analysis rather than static analysis, and developed a segmented model that can analyze the performance of the system over time using the Matlab/Simulink. The developed model can confirm the thermo-acoustic combustion instability and exhaust gas concentration in the combustion chamber according to the equivalent ratio change, and confirm the thermo-acoustic combustion instability for the inlet temperature and the load changes. As a result, segmented dynamic thermo-acoustic model has been developed to analyze combustion instability under the operating condition.

• Journal of the Korean Institute of Gas
• /
• v.20 no.1
• /
• pp.46-51
• /
• 2016

This study is analyzed by the test equipment of gas analyzer in order to discover the gas characteristics of industrial plastic under the pyrolysis and combustion. As results, first, the pyrolysis of polycarbonate was started at $400{\sim}450^{\circ}C$. The combustion started at about $608^{\circ}C$, and the weight decreased at the velocity was 0.03g/min. Second, in case of polyethyleneterephtalate, PET was finished at $620^{\circ}C$ after starting pyrolysis from $420^{\circ}C$, and the weight decreased at the velocity of 0.044g/min. The pyrolysis velocity with the temperature of polyethyleneterephtalate rising was becoming slow and the pyrolysis temperature was higher with less added polyethyleneterephtalate.