• Fire Science and Engineering
• /
• v.16 no.2
• /
• pp.14-21
• /
• 2002

The several floor finishing materials that widely used in entertainment service industry buildings were evaluated according to the method of NES 713. Also, toxic gases of floor finishing materials in combustion without air flow rate were checked as concentration of fire gases variation according to time using gas analyzer. We had estimated the smoke hazard of floor finishing materials in fire. As results of gas analyses using the method of NES 713, toxic index of samples was estimated range of 2～9.7. Therefore, a large amount of toxic gases will release from a floor finishing materials fire and connoted great smoke hazard in fire.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.16-25
• /
• 2000

To estimate the thermal characteristics and toxic parameters on styrene copolymers, We have investigated the activation energy, physical features and generation possibility of toxic material like narcotic gases. The activation energy was 25${\~}$50 Kcal/mol by the Kissinger's and DSC method at high temperature decomposition. It will be good information to estimate the possibility of fire occurrence. From calculations of FED, the values of $LC_{50}$ for PS, SAN and ABS were checked as 8,580, 265 and 308 $mg/m^3$ The mechanisms of thermal decomposition were mainly estimated by main chain scission, not by side group on FT-IR analysis.

• Journal of Korean Society of Water and Wastewater
• /
• v.8 no.1
• /
• pp.27-33
• /
• 1994

With the rapid industrialization, an ever-increasing quantity and kind of new organic compounds pose environmental problems due to their toxicity and physiological effect. However, research on the biodegradation of these compounds under anaerobic condition is very limited inspite of its efficiency and economical advantage. In this research, the pH effect on the ring cleavage of phenol under anaerobic condition was investigated, and the theory of phase separation was applied to the degradation of phenol for investigating the role of acidogenic bacteria. Results, obtained from biochemical methane potential(BMP) assay for 15.5 days of incubation, showed that acidic condition was more desirable for phenol degradation than alkaline condition. By both unacclimated methanogenic granular sludge and two mixed cultures, phenol was completely removed within six weeks of incubation with a gas conversion rate of over 86% of theoretical one. However, phenol was not degraded by unacclimated acidogenic culture, and thus it is considered as a syntrophic substrate. In case of phase separated biochemical methane potential(PSBMP) assay, in which acidogenic and methanogenic culture were seeded separately and consecutively, those that had been subjected to normal acidogens for 3 to 4 weeks showed higher gas production than those seeded with sterile or frozen culture.

• Advances in environmental research
• /
• v.9 no.2
• /
• pp.109-121
• /
• 2020

Phenol is frequently present as the hazardous pollutant in petrochemical and pesticide industry wastewater. Because of its high toxicity and carcinogenic potential, a proper treatment is needed to reduce the hazards of phenol carrying effluent before being discharged into the environment. Phenol biodegradation with microbial consortium offers a very promising approach now a day's. This study focused on the formulation of phenol degrading bacterial consortium with three bacterial isolates. The bacterial strains Bacillus cereus strain VCRC B540, Bacillus cereus strain BRL02-43 and Oxalobacteraceae strain CC11D were isolated from detergent contaminated soil by soil enrichment technique and was identified by 16s rDNA sequence analysis. Individual cultures were degrade 100 μl phenol in 72 hrs. The formulated bacterial consortium was very effective in degrading 250 μl of phenol at a pH 7 with in 48 hrs. The study further focused on the analysis of the products of biodegradation with Fourier Transform Infrared Spectroscopy (FT/IR) and Gas Chromatography-Mass Spectroscopy (GC-MS). The analysis showed the complete degradation of phenol and the production of Benzene di-carboxylic acid mono (2-ethylhexyl) ester and Ethane 1,2- Diethoxy- as metabolic intermediates. Biodegradation with the aid of microorganisms is a potential approach in terms of cost-effectiveness and elimination of secondary pollutions. The present study established the efficiency of bacterial consortium to degrade phenol. Optimization of biodegradation conditions and construction of a bioreactor can be further exploited for large scale industrial applications.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.414-420
• /
• 2007

Nanomaterials have been applied to various fields due to their advantageous characteristics such as high surface area, rapid diffusion, high specific surface areas, reactivity in liquid or gas phase, and a size close to biomacromolecules. Up to date, increased manufacturing and frequently use of the materials, however, revoke people's concerns on their hazard impact including toxicity the materials. Many research groups have carried out different protocols to evaluate toxic effects of nanomaterilas on different organisms, and consequently, nanomaterials are known to cytotoxicity. In this paper, we reviewed some of the most reports on toxic effects of several nanoparticles specifically on bacteria. There are numbers of reports focused on antibacterial effect of nanoparticles based on bacterial cell viability. Therefore, the application of each nanomaterial should be concerned with its toxicity and its toxic effect should be evaluated in terms of concentrations and sizes of the nanomaterials used, prior to use of a nanomaterial.

• Analytical Science and Technology
• /
• v.16 no.5
• /
• pp.368-374
• /
• 2003

Halogen gases such as $BCl_3$ and $CF_4$ are among the most problematic gases used in semiconductor process. They raise serious environmental and health problems due to their extreme toxicity. This study is to develop a method to effectively remove those gases during the process by using various types of inorganic gas adsorption agents such as zeolite A, modified AgA zeolite, ZnO, and $AgMnO_3$, which have not been attempted in the conventional methods. The removal efficiencies of the gases were both qualitatively and quantitatively measured by a FT-IR spectrophotometer. The whole device for the measurement has been designed and built in our lab. The removal efficiencies of the gases were compared between those used resins. The experimental result revealed that ZnO showed the best removal efficiency for BCl3 gas that had removed 0.094 g per 1 g of the resin used. For $CF_4$ gas, none of the solid resins was able to remove the gas effectively. However, liquid $CHCl_3$ showed some removal ability of the $CF_4$ gas.

• Advances in environmental research
• /
• v.4 no.1
• /
• pp.39-48
• /
• 2015

Bisphenol A is widely used in plastic and other industrial consumer products. Release of bisphenol A and its analogues into the aquatic environment during manufacture, use and disposal has been a great scientific and public concern due to their toxicity and endocrine disrupting effects on aquatic wildlife and even human beings. More recent studies have shown that these alkylphenols may affect the molting processes and survival of crustacean species such as American lobster, crab and shrimp. In this study, we have developed gas chromatography with flame ionization detection (GC-FID) and gas chromatography-mass spectrometric (GC-MS) methods for the determination of bisphenol A and its analogues in shrimp Macrobrachium rosenbergii, blue crab Callinectes sapidus and American lobster Homarus americanus samples. Bisphenol A, 2,4-bis-(dimethylbenzyl)phenol and 4-cumylphenol were found in shrimp in the concentration ranges of 0.67-5.51, 0.36-1.61, and < LOD (the limit of detection)-1.96 ng/g (wet weight), and in crab of 0.10-0.44, 0.13-0.62, and 0.26-0.58 ng/g (wet weight), respectively. In lobster tissue samples, bisphenol A, 2-t-butyl-4-(dimethylbenzyl)phenol, 2,6-bis-(t-butyl)-4-(dimethylbenzyl)phenol, 2,4-bis-(dimethybenzyl)phenol, 2,4-bis-(dimethylbenzyl)-6-t-butylphenol and 4-cumylphenol were determined at the concentration ranges of 4.48-7.01, 1.23-2.63, 2.71-9.10, 0.35-0.91, 0.64-3.25, and 0.44-1.00 ng/g (wet weight), respectively. At these concentration levels, BPA and its analogs may interfere the reproduction and development of crustaceans, such as larval survival, molting, metamorphosis and shell hardening.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.133-140
• /
• 2008

The purpose of this study is to provide response methods to minimize the damage from chemical terrorism in a naturally ventilated indoor system using several types of dispersion simulations. Three chemical warfare agents such as sarin(GB), phosgene and chlorine gas which have high potential to be used in terror or to be involved with accidents were selected in this simulation. Fire dynamic simulation based on Large Eddy Simulation which is effective because of less computational effort and detailed expression of the dispersion flow was adopted to describe the dispersion behavior of these agents. When the vent speed is 0.005m/s, the heights of 0.1 agent mass fraction are 0.9m for sarin, 1.0m for phosgene and 1.1m for chlorine gas, and the maximum mass fraction are 0.27 for all three agents. However, when the vent speed is increased to 0.05m/s, the heights of 0.1 agent mass fraction become 1.6m for all three agents and maximum mass fraction inside the room increase to 0.70 for sarin, 0.58 for phosgene and 0.53 for chlorine gas. It is shown that molecular weight of the agents has an important role for dispersion, and it is important to install ventilation system with height less than 1.6m to minimize the damage from chemical toxicity.

• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.1
• /
• pp.30-40
• /
• 2007

The objective of this study was to investigate the contribution of various smoke constituents to the toxicological activity of total particulate matter(TPM) or the gas/vapor phase(GVP). These components included phenol compounds, aromatic amines, polycyclic aromatic hydrocarbons, heterocyclic amines, and carbonyl compounds. The mutagenic and cytotoxic potencies were assessed using the Salmonella mutagenicity assay with S. typimurium TA98 strain and the neutral red uptake cytotoxicity assay(NRU) with BALB/c 3T3 fibroblast cells, respectively. The Salmonella mutagenicity test showed that heterocyclic amines exhibited significantly higher levels of toxicity compared to other smoke constituents. Among them, 2-amino-3,4-dimethylimidazo[4,5-f]quinoline(MeIQ) was shown the most mutagenic compound with a specific mutagenicity of $7.9{\times}10^5\;revertants/{\mu}g$. An analysis of the possible contribution revealed that MeIQ account for only 0.85% of the 2R4F-TPM mutagenicity in TA98. NRU data demonstrated that high cytotoxic activity was obtained for hydroquinone, formaldehyde, and acrolein. Based on the results of the present study, the contribution of acrolein to the cytotoxicity of the GVP fraction was calculated as 61%. Thus, a large proportion of the cytotoxic activity of this complex mixture, cigarette smoke gas phase, can be attributed to the acrolein.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.253-262
• /
• 2013

The test on the mix of PVA fiber of low carbon inorganic composite as a cement substitute found it to be satisfactory in terms of flexibility and stiffness. The result of the evaluation of the properties of low carbon inorganic panel revealed that the absorptivity was low at 8 to 9%, which is lower than the KS value of 25%. Also, the test on non-combustibility and gas toxicity found that these factors satisfied the decision criteria. In the test on heavy metals discharges, Pb, Cd, Cr6+, Hg, and As were not detected. Regarding far-Infrared emissivity and formaldehyde emission, the substitute was found to be harmless to the human body. Therefore, if the issue of shrinkage, which is a disadvantage of inorganic composites, is addressed, it is judged that it is possible to develop a low carbon inorganic composite panel with better performance.