• 대한기계학회논문집B
• /
• 제32권9호
• /
• pp.704-711
• /
• 2008

Integrated gasification combined cycle (IGCC) is an environment friendly method of using coal. Several commercial IGCC plants have been built worldwide during the past decade, and a domestic development project has also been launched recently. Operation and performance characteristics of a gas turbine in the IGCC plant deviates from those of original gas turbines due to several factors such as increased amount of fuel supply and integration with other components. In this study, performance of a gas turbine in the IGCC plant is analyzed considering its integration with the air separation unit (ASU). Influence of the degree of integration (split of air supplies to ASU from the auxiliary compressor and the gas turbine compressor) on the system performance is investigated. In addition, effect of modulating nitrogen return flow from the gasifier to the gas turbine on the operating characteristics of the gas turbine is examined.

• 한국재료학회지
• /
• 제28권3호
• /
• pp.159-165
• /
• 2018

In order to increase the efficiency of the sputtering method widely used in thin film fabrication, a dc sputtering apparatus which supplies both high frequency and magnetic field from the outside was fabricated, and cobalt thin film was fabricated using this apparatus. The apparatus can independently control the applied voltage, the target-substrate distance, and the target current, which are important parameters in the sputtering method, so that a stable glow discharge is obtained even at a low gas pressure of $10^{-3}$ Torr. The fabrication conditions using the sputtering method were mainly performed in $Ar+O_2$ mixed gas containing about 0.6 % oxygen gas under various Ar gas pressures of 1 to 30 mTorr. The microstructure of Co thin films deposited using this apparatus was examined by electron diffraction pattern and X-ray techniques. The magnetic properties were investigated by measuring the magnetization curves. The microstructure and magnetic properties of Co thin films depend on the discharge gas pressure. The thin film fabricated at high gas pressure showed a columnar structure containing a large amount of the third phase in the boundary region and the thin film formed at low gas pressure showed little or no columnar structure. The coercivity in the plane was slightly larger than that in the latter case.

• 한국추진공학회지
• /
• 제8권2호
• /
• pp.10-17
• /
• 2004

본 논문에서는 액체로켓엔진용 160 kW급 터보펌프의 터빈을 구동하고, 액체산소와 케로신을 추진제로 사용하는 연료 과잉 가스발생기의 설계점 연소성능시험 결과에 대해 논의하였다. 충돌형 F-O-F 분사기로 구성된 헤드부, 물냉각 채널 연소실, torch igniter, turbulence ring 그리고 측정 링을 갖는 가스발생기에 대해 기술하였고, 설계점에서의 연소시험 및 turbulence ring 장착여부. 연소실 길이 변화에 따른 연소시험의 결과들에 대해 기술하였다. 연소시험 결과 가스발생기는 설계점에서 안정된 작동성을 보여주었고. 연소압력 및 온도 등의 성능은 예측치에 근접하는 결과였다. Turbulence ring은 출구에서의 가스온도를 균일하게 분포시켜 효과적인 혼합 장치임을 보여 주었고, 4∼6msec 정도에서의 연소가스 잔류시간은 연소효율에 큰 영향을 주지 않았다. 가스발생기 출구에서의 온도는 공급되는 추진제의 O/F ratio에 따라 매우 민감하게 변화하였다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권1호
• /
• pp.34-45
• /
• 2007

In order to reduce the compression power and to use the overall energy contained in LNG effectively, a combined cycle is devised and simulated. The combined cycle is composed of two cycles; one is an open cycle of liquid/solid carbon dioxide production cycle utilizing LNG cold energy in $CO_2$ condenser and the other is a closed cycle gas turbine which supplies power to the $CO_2$ cycle, utilizes LNG cold energy for lowering the compressor inlet temperature, and uses the heating value of LNG at the burner. The power consumed for the $CO_2$ cycle is investigated in terms of a solid $CO_2$ production ratio. The present study shows that much reduction in both $CO_2$ compression power (only 35% of the power used in conventional dry ice production cycle) and $CO_2$ condenser pressure could be achieved by utilizing LNG cold energy and that high cycle efficiency (55.3% at maximum power condition) in the gas turbine could be accomplished with the adoption of compressor inlet cooling and regenerator. Exergy analysis shows that irreversibility in the combined cycle increases linearly as a solid $CO_2$ production ratio increases and most of the irreversibility occurs in the condenser and the heat exchanger for compressor inlet cooling. Hence, incoming LNG cold energy to the above components should be used more effectively.

• 한국가스학회지
• /
• 제4권3호
• /
• pp.19-25
• /
• 2000

지진 발생 시 일어날 수 있는 대규모 가스 폭발과 같은 2차 재앙을 미연에 방지하기 위해 천연가스 공급관리소에 설치하는 지진 감지 및 전송 시스템을 개발하였다. 천연가스 공급관리소에서 지진 감지 시스템을 효율적으로 설치하고 운용하기 위하여, 공급관리소의 지반 노이즈패턴 분석을 통하여 지반의 운동을 좀더 정밀히 계측할 수 있는 센서 설치 위치와 설치 방법을 제안하였다. 지진 발생 시 가스 차단 여부를 신속히 판단하기 위해 PGA(Peak Ground Acceleration)와 지진파가 가지는 에너지와 밀접한 연관성을 가지는 Sl(Spectrum Intensity)를 실시간으로 계산하는 알고리즘을 개발하였고 이를 지진 감지 시스템 내에 실현하였다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2001년도 추계학술대회 논문집
• /
• pp.219-220
• /
• 2001

Each atom is enclosed with $\pi$-rays, which were produced by the alternating magnetic field that is made by the electron's going and returning between atoms. If some resonant $\pi$-rays are supplied to and suppress the fencing $\pi$-rays, the bonding will be broken because the equilibrium distance for the electron moving between atoms can not be maintained. Electrolysis process supplies $\pi$-rays of Gibb's free energy to the reactant atoms and then the component atoms are divided into and are induced to both electric poles. (omitted)

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2001년도 추계학술대회 논문집
• /
• pp.217-218
• /
• 2001

Each atom is enclosed with $\pi$-rays, which were produced by the alternating magnetic field that is made by the electron's going and returning between atoms. If some resonant $\pi$-rays are supplied to and suppress the fencing $\pi$-rays, the bonding will be broken because the equilibrium distance for the electron moving between atoms can not be maintained. Electrolysis process supplies $\pi$-rays of Gibb's free energy to the reactant atoms and then the component atoms are divided into and are induced to both electric poles. (omitted)

• 설비공학논문집
• /
• 제29권11호
• /
• pp.612-620
• /
• 2017

Power consumption in Southeast Asia is steadily increasing due to industrialization and the effects of hot and humid climates. However, there are not enough energy generation facilities and infrastructures to meet the growing demand because it is difficult to secure the construction and operation costs of the transmission and distribution systems. This study aims to develop a gas engine driven heat pump system that supplies heating, cooling and electric power to buildings. This system, besides its normal function to produce heat, has the capacity to generate electricity on a household level. This paper investigates similar cases overseas before developing the system. Through the investigation of commercialized similar systems, the level of technology and market trend of development system were identified. Features and specifications of commercial and industrial systems will be used for system development.

• 한국유체기계학회 논문집
• /
• 제19권6호
• /
• pp.19-25
• /
• 2016

Anti-icing is important in gas turbines because ice formation on compressor inlet components, especially inlet guide vane, can cause performance degradation and mechanical damages. In general, the compressor bleeding anti-icing system that supplies hot air extracted from the compressor discharge to the engine intake has been used. However, this scheme causes considerable performance drop of gas turbines. A new method is proposed in this study for the anti-icing in combined cycle power plants(CCPP). It is a heat exchange heating method, which utilizes heat sources from the heat recovery steam generator(HRSG). We selected several options for the heat sources such as steam, hot water and exhaust gas. Performance reductions of the CCPP by the various options as well as the usual compressor bleeding method were comparatively analyzed. The results show that the heat exchange heating system would cause a lower performance decrease than the compressor bleeding anti-icing system. Especially, the option of using low pressure hot water is expected to provide the lowest performance reduction.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.413-416
• /
• 2009

액체로켓 엔진에서 산화제를 가스발생기에 공급하는 가스발생기 산화제 개폐밸브는 가스 발생기 연소압 이상의 높은 압력에서 구조적인 안정성을 확보하여야 한다. 본 연구에서는 내압 하중 조건을 받는 밸브의 경량화를 위하여 응력 집중 부위의 형상을 변화시켜가며 정적 응력 해석을 수행하였다. 그리고 최대 응력이 항복응력을 넘지 않으며 최소 중량을 가지는 밸브 형상을 제시하였다. 또한, 응력 집중부에 대한 전체 밸브 사이즈 변화의 영향도 살펴보았다.