• 대한화학회지
• /
• 제43권2호
• /
• pp.182-192
• /
• 1999

글로우 방전(Glow Discharge, GD)과 유도결합플라스마(Inductively Coupled Plasma, ICP)-원자 방출분광법(Atomic Emission Spectrometer, AES)에서 사용되는 새로운 장치를 개발하였다. ICP-AES에서 GDAES로 전환하는 데 불과 15분 정도 소요되기 때문에, 고체 시료 및 액체시료에 포함된 극미량 원소분석을 신속하게 수행할 수 있다. 실험변수 중에서 냉각기체 유속, 시료운반기체 유속, 절단기체 유속, 보조기체 유속, 측정깊이, 이온 통과관 크기, 그리고 rf 전원의 세기 변화에 따른 원자 방출 복사선 변화에 미치는 영향을 조사 연구하였다. Cd(I) 228.8 nm, Mn(II) 257.61 nm, and Fe(II) 259.95 nm에서 측정한 검출한계는 각각 3.86, 1.49, 5.79 ppb로 측정되었으며, 직선성은 1.000으로서 우수하였다.

• 한국산업보건학회지
• /
• 제25권2호
• /
• pp.156-165
• /
• 2015

Objectives: The purpose of this study was to investigate the possible effects of a gasoline vapor recovery system on personal exposure levels of gasoline vapor constituents including benzene, toluene, ethyl benzene, xylene(BTEX), and methyl tert-butyl ether(MTBE) among gas station workers in a metropolitan area. Methods: Thirty-one gas station workers at ten gas stations in a metropolitan area were selected as subjects for this study. Test method PV2028 as recommended in the OSHA process was used for sampling and analysis. Results: The personal exposure levels of benzene, toluene, ethyl benzene, xylene, MTBE and gasoline vapor in the gas station workers were $0.0018{\pm}0.0069ppm$, $0.0077{\pm}0.0137ppm$, $0.0002{\pm}0.0008ppm$, $0.0016{\pm}0.0084ppm$, $0.2619{\pm}0.3340ppm$, and $1.4940{\pm}1.7984ppm$, respectively. After adjustment for refueling frequency and volume, personal exposure levelswere higher in the gas stations where gasoline vapor recovery systems(Stage II) were not installed, but the results were not statistically significant. Gasoline vapor concentrations showed a positive correlation to the level of MTBE, a gasoline additive. Conclusions: Vapor recovery systems(Stage II) were effective not only in reducing emissions of air pollutants, but also in reducing exposure to hazardous substances among gas station workers. In addition, acorrelation between gasoline vapors and MTBE concentration was confirmed.

• 한국환경농학회지
• /
• 제39권3호
• /
• pp.228-236
• /
• 2020

BACKGROUND: The closed chamber method is the most commonly used for measuring greenhouse gas emissions from rice fields. This method has the advantages of being simple, easily available and economical. However, a measurement result using the chamber method is an estimated value and is complete when the uncertainty is estimated. The methane emissions from a rice paddy account for the largest portion of the greenhouse gas emissions in the agriculture sectors. Although assessment of uncertainty components affecting methane emission from a rice paddy is necessary to take account of dispersion characteristics, research on these uncertainty components is very rare to date. The goal of this study was to elucidate influencing factors on measurement uncertainty of methane concentrations measured by a closed automated chamber system from a rice paddy. METHODS AND RESULTS: The methane sampling system is located in the rice paddy in Gyeonggi-do Agricultural Research and Extension Services (37°13'15"N, 127°02'22"E). The primary measurement uncertainty components influencing methane concentrations (influencing factors) investigated in this research were repeatability, reproducibility and calibration in the aspects of methane sampling and analytical instrumentation. The magnitudes of the relative standard uncertainty of each influencing factor were quantified and compared. CONCLUSION: Results of this study showed what influencing factors were more important in determination of methane concentrations measured using the chamber system and analytical instrumentation located in the monitoring site. Quantifying the measurement uncertainty of the methane concentrations in this study would contribute to improving measurement quality of methane fluxes.

• 분석과학
• /
• 제23권5호
• /
• pp.465-476
• /
• 2010

본 연구에서는 대기환경시료 및 현장조건에서 채취한 현장시료들 중, 악취성분 및 주요 VOC 성분들 중에서 여러 유형의 관리대상으로 지정 중인 benzene, toluene, p-xylene, styrene, methyl ethyl ketone의 농도분석 방식들을 비교하였다. 이때, GC/FID와 튜브를 연계한 F-T 분석방식과 GC/MS와 백(bag)을 연계한 M-B방식으로 같은 시료를 각각 분석하고 이들 결과 값을 비교하였다. 상관분석결과, toluene과 pxylene에서 F-T와 M-B방법간의 결과에서 큰 상관성을 보이는 것으로 나타났다(P < 1.4E-08). 양 기기간의 오차를 percent difference (PD)와 같이 산술적으로 구하여 평가한 결과, benzene과 toluene의 농도는 상대적으로 비슷한 경향을 보였다. 그러나 분석대상 성분들 간에 양 방식의 차이는 평균적으로 35%가 넘으면서 F-T와 M-B간의 오차가 일정 수준이상으로 존재하였다. 그리고 F-T/M-B ratio가 대부분 1 이하로 나타나면서, M-B의 결과 값이 F-T에 비해 상대적으로 크게 나타나는 경향을 보였다. 양 분석기기로부터 산출한 결과 값을 통계적으로 판단하기 위해, t-test를 실시하였다. 그 결과, 95% 신뢰수준에서 toluene, pxylene, styrene, methyl ethyl ketone 성분에서는 두 시스템간의 결과 값에 차이가 유의한 것으로 나타났다(P < 0.043). 그러나 전반적으로 양 분석기법의 차이에 따른 오차는 상당 부분 선택한 표준시료의 성상 및 백내부의 시료손실 등과 같은 요인에 크게 영향을 받는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제36권4호
• /
• pp.338-345
• /
• 2004

This study examines the sensitivity of several fabrication parameters for dry process fuel, using a random sampling technique. The in-pile performance of dry process fuel with irradiation was calculated by a modified ELESTRES code, which is the CANDU fuel performance code system. The performance of the fuel rod was then analyzed using a Monte Carlo simulation to obtain the uncertainty of the major outputs, such as the fuel centerline temperature, the fission gas pressure, and the plastic strain. It was proved by statistical analysis that for both the dry process fuel and the $UO_2$ fuel, pellet density is one of the most sensitive parameters, but as for the fission gas pressure, the density of the $UO_2$ fuel exhibits insensitive behavior compared to that of the dry process fuel. The grain size of the dry process fuel is insensitive to the fission gas pressure, while the grain size of the $UO_2$ fuel is correlative to the fission gas pressure. From the calculation with a typical CANDU reactor power envelop, the centerline temperature, fission gas pressure, and plastic strain of the dry process fuel are higher than those of the $UO_2$ fuel.

• 한국환경농학회지
• /
• 제13권3호
• /
• pp.359-372
• /
• 1994

A simplified closed static chamber method was devised for measurement of methane flux from paddy fields. Compared to automatic methane measuring system(AMMS) this chamber method provides availability with moderate costs of setup and maintenance, while it also provides the time-effectiveness compared to other closed top-type chamber method. It accomodates 30 chambers within 2 hours sampling period with two persons. And it provide a rapid and accurate analysis of methane, 30-40 samples per hour. Modified method for $N_2O$ measurements provides a precise and accurate analysis of nitrous oxide without upgrading additional heating zones for gas sampling(switching) valves.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2000년도 추계학술대회
• /
• pp.181-184
• /
• 2000

It is a quite quality concerning to control temperature of single crystalline it does when you get most of heat treating Products. It is also important control temperature when you make the A1203(single crystalline) used to jewels, 91ass of watches. heat resistant transparent 91asses. Thus, it is a md to get the proper temperature in accordance with the time process while making mixture of oxygen and hydrogen to have the right temperature. In we will study of electrical valve positioning system for the gas mixture to im quality of Products.

• Environmental Engineering Research
• /
• 제11권1호
• /
• pp.33-44
• /
• 2006

The objective of this study was to develop and assess a method for estimating the rain scavenging ratios (RSRs) of particle-bound PAHs and PCBs using measured scavenging ratio of particulate matters (PM) and routinely available data of physico-chemical properties of PM. Paired atmospheric and rainwater sampling was conducted for a total of 4 rain events. Assuming equilibrium partitioning in rainwater-gas-PM system, an equation was derived for estimating the RSR of particle-bound chemicals as a function of RSR of PM and three equilibrium partition constants (i.e. dimensionless Henry's law constant, gas-particle partition coefficient, and water-particle partition coefficient). For all PAHs, the model significantly under-predicted the RSR while the model prediction for PCBs agreed with observation mostly within a factor of 5. The RSR model for the chemicals is of limited use as its accuracy critically depends on how close the observed partitioning of the chemicals in the gas-PM-rainwater system is to that estimated under the equilibrium assumption.

• 한국대기환경학회지
• /
• 제12권4호
• /
• pp.441-448
• /
• 1996

The cyclone/annular denuder system/filter pack sampling system (ADS) was used to collect the acidic air pollutants in Chongju city. The data set was collected on nine different days with 24 hour sampling period from July 27 through August 27, 1995. The chemical species measured were $HNO_3, HNO_2, SO_2 and NH_3$ in the gas phase, and $PM_{2.5}(d_P<2.5 \mum), SO_4^{2-}, NO_3^- and NH_4^+$ in the particulate phase. Mean concentrations measured from this study were: $0.90 \mug/m^3 for HNO_3, 1.27 \mug/m^3 for HNO_2, 10.9 \mug/m^3 for SO_2, 4.82 \mug/m^3 for NH_3, 27.5 \mug/m^3 for PM_{2.5}, 5.24 \mug/m^3 for SO_4^{2-}, 1.22 \mug/m^3 for NO_3^-, and 1.64 \mug/m^3 for NH_4^+$. The fine particle $(PM_{2.5})$ mass measured for the ADS samples was slightly higher than the fine particle mass measured for the corresponding dichotomous sampler. For the wind coming from Chongju industrial complex the concentrations of acidic air pollutants measured were higher when compared with other directions. Specially, $SO_2 and PM_{2.5}$ concentrations for the wind coming from Chongju industrial complex were 3.6 and about 2 times, respectively, higher than those of other wind directions. High correlations were observed between $PM_{2.5} and fine particle's ion components $(r=0.82 with SO_4^{2-}, r=0.76 with NO_3^- and r=0.89 with NH_4^+). NH_4^+ and SO_4^{2-}$ was also highly correlated (r=0.97).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.406-409
• /
• 1999

Experimental Investigations were carried out to remove NOx, SOx simultaneously from simulated flue gas[NO(0.02%)-SO$_2$(0.08%)-$CO_2$-Air-$N_2$] by using a plasma chemical reaction. Ammonia gas(14.81%) balanced by argon was diluted by all and was Introduced to mall simulated flue gas duct through NH$_3$ Injection system which is in downstream of reactor. The NH$_3$ molecular ratio(MR) was determined based on (NH3) to [NO+S0$_2$]. MR is 1, 1.5, 2.5. The NOx removal rate significantly increased with increasing NaOH bubble quantity. The SO$_2$ removal rate was not significantly effected by applied voltage, however it fairly Increased with increasing NH$_3$ molecule ratio. By-product aerosol particle was observed by XRD(X-ray diffraction) after sampling, The NOx, SOx removal rates, when H2O vapour bubbled by dry all was injected to plasma reactor, were better than those of other cases. When aqueous NaOH solution(20%) bubbled by 2.5( ι /min) of $N_2$ and 0.5 ( ι /min) NH$_3$(MR=1.5) were injected to simulated flue gas, The NOx. SOx removal rate was 95 ~ 100[%]