• 한국재료학회지
• /
• 제20권9호
• /
• pp.494-499
• /
• 2010

Tin oxide thin films were prepared on borosilicate glass by rf reactive sputtering at different deposition powers, process pressures and substrate temperatures. The ratio of oxygen/argon gas flow was fixed as 10 sccm / 60 sccm in this study. The structural, electrical and optical properties were examined by the design of experiment to evaluate the optimized processing conditions. The Taguchi method was used in this study. The films were characterized by X-ray diffraction, UV-Vis spectrometer, Hall effect measurements and atomic force microscope. Tin oxide thin films exhibited three types of crystal structures, namely, amorphous, SnO and $SnO_2$. In the case of amorphous thin films the optical band gap was widely spread from 2.30 to 3.36 eV and showed n-type conductivity. While the SnO thin films had an optical band gap of 2.24-2.49 eV and revealed p-type conductivity, the $SnO_2$ thin films showed an optical band gap of 3.33-3.63 eV and n-type conductivity. Among the three process parameters, the plasma power had the most impact on changing the structural, electrical and optical properties of the tin oxide thin films. It was also found that the grain size of the tin oxide thin films was dependent on the substrate temperature. However, the substrate temperature has very little effect on electrical and optical properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.787-790
• /
• 2003

A rf triode magnetron sputtering system is designed and installed its construction in vacuum chamber. In order to calibrate the rf triode magnetron sputtering for thin films deposition processes, the effects of different glow discharge conditions were investigated in terms of the deposition rate measurements. The basic parameters for calibrating experiment in this sputtering system are rf power input, gas pressure, plasma current, and target-to-substrate distance. Because a knowledge of the deposition rate is necessary to control film thickness and to evaluate optimal conditions which are an important consideration in preparing better thin films, the deposition rates of copper as a testing material under the various sputtering conditions are investigated. Furthermore, a triode sputtering system designed in our team is simulated by the SIMION program. As a result, it is sure that the simulation of electron trajectories in the sputtering system is confined directly above the target surface by the force of $E{\times}B$ field. Finally, some teats with the above 4 different sputtering conditions demonstrate that the deposition rate of rf triode magnetron sputtering is relatively higher than that of the conventional sputtering system. This means that the higher deposition rate is probably caused by a high ion density in the triode and magnetron system. The erosion area of target surface bombarded by Ar ion is sputtered widely on the whole target except on both magnet sides. Therefore, the designed rf triode magnetron sputtering is a powerful deposition system.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.104-108
• /
• 2014

The recent Fukushima nuclear power plant accidents shows that the core make up at high RCS pressure condition is very important to prevent core melting. The core make up flow at high pressure condition should be driven by gravity force or passive forces because the AC-powered safety features are not available during a Station Black Out (SBO) accident. The reactor Coolant System (RCS) mass inventory is continuously decreased by releasing steam through the pressurizer safety valves after reactor trip during a SBO accident. The core will be melted down within 2~3 hours without core make up action by active or passive mode. In the new design concept of a Hybrid Safety Injection Tank (Hybrid SIT) both for low and high RCS pressure conditions, the low pressure nitrogen gas serves as a charging pressure for a LBLOCA injection mode, while the PZR high pressure steam provides an equalizing pressure for a high pressure injection mode such as a SBO accident. After the pressure equalizing process by battery driven initiation valve at a high pressure SBO condition, the Hybrid SIT injection water will be passively injected into the reactor downcomer by gravity head. The SBO simulation by MARS code show that the core makeup injection flow through the Hybrid SIT continued up to the SIT empty condition, and the core heatup is delayed as much.

• 대한기계학회논문집B
• /
• 제36권5호
• /
• pp.477-485
• /
• 2012

수평 덕트 내 임계점부근의 유체 유동 및 열전달특성은 중력과 함께 임계영역에서의 열역학 및 전달 물성치의 많은 변화와 직접적으로 연관되어 있다. 본 연구에서는 수평 직사각 덕트 내 임계점부근의 물에 대한 대류열전달특성을 전산해석을 통하여 분석하였다. 이를 통해 국부적인 열전달계수와 유속, 온도, 그리고 물성치분포를 포함한 대류열전달특성에 대해 임계점 근접효과와 함께 비교하였다. 벽으로부터의 열전달에 따른 유체 밀도감소로 덕트 내 유동방향으로의 유속증가와 함께 유체가 액체에서 기체 같은 상태로 천이하는 형태의 유동장특성을 보여준다. 덕트의 윗면, 옆면, 그리고 아래면 각각의 국부적인 열전달계수분포에 큰 차이가 있으며 준임계점 온도부근에서 난류전달특성의 향상으로 열전달계수의 최대치에 이르게 된다. Nu 수는 덕트 내 압력과 종횡비에 영향을 받으며 임계압에 가까워질수록 최대 Nu 수는 급격히 증가하게 된다. 이와 함께 기존의 열전달상관식을 통한 결과와 예측된 Nu 수 분포를 비교하였다.

• 대한화학회지
• /
• 제59권6호
• /
• pp.508-519
• /
• 2015

본 연구에서는 개념 질문지를 사용하여 퍼텐셜 에너지 곡선에 대한 예비 화학 교사들의 이해 정도를 조사하였다. 조사 대상은 화학교육을 전공하는 사범대학 3학년 학생 24명, 4학년 학생 26명으로 총 50명이었다. 개념 질문지는 구슬 두 개의 거리에 따른 퍼텐셜 에너지 변화 곡선을 주고 상상실험을 하는 것으로 구성하였다. 질문지의 응답을 분석한 결과 예비 화학 교사들은 퍼텐셜 에너지나 전체 역학적 에너지가 음의 값을 가지는 것을 받아들이기 어려워하였다. 또한 역학적 에너지 보존은 대부분 알고 있었으나 이를 상상실험의 조건에 제대로 적용하지 못하는 것으로 나타났다. 그리고 구슬에 작용하는 힘의 방향은 대체로 알고 있었으나, 초기 위치에서 구슬이 이동하여 퍼텐셜 에너지가 가장 낮은 우물 바닥에서 정지할 것이라는 응답이 상당히 많았다. 또한 퍼텐셜 에너지 곡선과 관련지어 화학 결합, 기체의 액화, 분자의 진동 운동에 대한 이해도가 매우 낮은 것으로 드러났다.

• 청정기술
• /
• 제7권2호
• /
• pp.127-132
• /
• 2001

수소 등 다성분 혼합가스로부터 고순도의 수소를 얻기 위한 PSA 조업에 있어서 흡착탑 내 활성탄 층 충전길이의 효과를 연구하였다. 기-고상 간 물질전달은 LDF 식을 사용하였고 각 조성물질의 비선형 흡착등온선으로 변형 Langmuir 식을 사용하였다. 각각 다른 흡착성능을 가진 활성탄과 제올라이트 2개의 흡착제를 한 개의 흡착탑 내에 연속 충전시킨 결과 제품의 순도와 회수율 면에서 흡착제의 충전길이 비가 매우 중요하였다. 120 cm인 흡착탑 내 최적의 활성탄 층 길이는 $CO_2$ 농도가 최종 제거되는 부위로 결정되는데 이 때 제품의 최고 순도를 나타내는 지점이 65cm였다.

• Journal of Welding and Joining
• /
• 제27권1호
• /
• pp.65-70
• /
• 2009

Ir-192 radiation sealed sources are widely employed to the therapeutic applications as well as the non-destructive testing. Production of Ir-192 sources requires a delicate but robust welding technique because it is employed in a high radioactive working environment. A GTA(Gas Tungsten Arc) welding technique is currently well established for this purpose. However, this welding method requires a frequent replacement of the electrode, which results in the delay of the production to take a preparatory action such as to isolate the radiation sources from the working place before getting access to the welding machine. Hence, a resistance welding technique is considered as an alternative method of the GTA welding technique. The advantages of resistance welding are high welding speed and high-rate production. Also it has very long life of electrode comparing to GTA welding. In this study, the resistance welding system and proper welding conditions were established for sealing Ir-192 source capsule. As a results of various experiments, it showed that electrode displacement can be employed as a indicator to predict welding quality. We proposed two mathematical models(linear and curvilinear) to estimate electrode displacement with process parameters such as applied force, welding current and welding time by using regression analysis method. Predicting results of both linear and curvilinear model were relatively good agreement with experiment.

• 한국지반공학회논문집
• /
• 제27권3호
• /
• pp.75-83
• /
• 2011

일반적인 불포화지반의 거동뿐만 아니라, 열과 관련된 분야, 지반환경 분야 등 다양한 분야에서 불포화 다공질 재료의 열적-수리적-역학적으로 결합된 문제들이 대두되면서 이러한 문제들을 해석하기 위한 수치도구 개발의 필요성이 대두되고 있다. 본 논문에서는 거시적 접근법(macroscopic approach)에 근거하여 불포화지반에 대한 열-수리-역학거동의 수식화를 하였다. 흙, 물, 공기에 대한 질량보존의 법칙, 에너지 보존법칙, 그리고 하중평형 조건식으로부터 결합된(coupled) 4개의 지배방정식을 유도하였다. Galerkin 간략화와 시간적분으로부터 주 변수인 변위(u), 가스압($P_g$), 유체압($P_1$), 온도(T)를 Newton의 반복과정을 이용하여 구하는 유한요소 프로그램(FEM)을 작성하였다. 개발된 프로그램을 이용하여 다공질재료에서 2상 흐름 문제 중 일차원 배수실험(u-$P_g-P_1$), 온도 압밀(u-$P_1$-T), 그리고 지표면 온도변화에 의한 말뚝의 주변지반에 대한 영향(u-$P_1$-T)에 대하여 수치해석을 수행하고 논의하였다.

• 한국입자에어로졸학회지
• /
• 제15권4호
• /
• pp.139-148
• /
• 2019

This study was performed for the application of a high-speed centrifugal cyclone to shale gas mining process. This device uses the centrifugal force to control particles similar to typical cyclones, and the disk located inside the cyclone is forced to rotate using a motor. The pressure difference occurred during the rotating of disk. Hence, inflow rate was generated without a blower fan. In addition, flow rate increased with elevating rpm of motor. The installing the disk in multiple stages on the inner rotor increased the instantaneous disk outlet flow. Hence, the control efficiency of oil particle increased from 1.05% to 31.2%. By modifying the structure of the disk so that the air flow to the opposite direction of the cyclone, the control efficiency of oil particles increased to 81.5%. By increasing the capacity of the motor and the size of the disk, the flow rate was increased to 2.5 ㎥/min because the rpm of motor and pressure difference increased. As rpm of motor increased, the cut-off diameter (d_pc) became smaller. Unlike the Lapple's equation, d_pc was inversely proportional to the effective number of rotations (N_e). The control efficiency was maintained even if the concentration of oil particles increased, for this reason, the higher the oil concentration, the more particles were accumulated and controlled.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1044-1048
• /
• 2015

Recently, the viability of the Northern Sea Route has been receiving a remarkable amount of attention. Owing to global warming, glaciers in the Arctic Ocean have been melting rapidly, which has opened up navigation routes for ships with commercial as well as research purposes. At present, vessels can be economically operated along the Northern Sea Route four months of the year. However, studies have shown that the economical operating time may increase to six months by 2020 and year-round by 2030. Even though the conditions of the Northern Sea Route are extreme, the main reason for its use is that the route is shorter than the existing route using the Suez Canal, which provides an economic benefit. In addition, 25% of the world's oil reserves and 30% of its natural gas are stored in the coastal areas of the East Siberian Arctic region. Many factors are leading to the expectation of commercial navigation using the Northern Sea Route in the near future. To satisfy future demand, the International Maritime Organization established the Polar Code in order to ensure navigation safety in polar waters; this is expected to enter into force on January 1, 2017. According to the code, a ship needs to reduce its speed and analyze the ice for safe operation before entering into it. It is necessary to enter an ice field at a right angle to break the ice safely and efficiently. This study examined the operation along the course for safe navigation of the passage under several conditions. The results will provide guidelines for traffic officers who will operate ships in the Arctic Ocean.