• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.660-668
• /
• 2012

The purpose of this study is to analyze the thermal characteristics of garments marketed for Korean males and to investigate the influence of each garment on ensemble, by measuring their insulation values(clo) using thermal manikins. The results are as follows. The total insulations(clo) of ensembles for S/S seasons are between 1.46 and 2.6 clo, with the mean of 2.12 clo. The insulation in the still air condition is 1.23 clo, which means a decrease of 42% compared to the total insulation of all the component garments. The insulation of ensembles for S/S seasons in the dynamic air condition decreased by 46.8%, compared to the still air condition. The total insulation(clo) of ensembles for F/W seasons is between 3.84 and 7.36 clo with the mean of 4.74 clo. The insulation in the still air condition is 2.26 clo, which means a decrease of 53.6% compared to the total insulation of all the component garments. The insulation of ensembles for F/W seasons in the dynamic air condition decreased by 36.2%, compared to the still air condition. As the clo value of each component garment gets higher, the insulation of ensembles gets higher. Especially, the insulation of ensembles was more influenced by outer wear than inner wear. The insulation of ensembles could be predicted by the insulation of outerwear better.

• Fashion & Textile Research Journal
• /
• v.7 no.5
• /
• pp.472-480
• /
• 2005

It was proved the practical use of the unique traditional Korean paper through the previous researches. The purpose of this study was to suggest the adequate application which is making various applied patterns in the fashion products so as to contribute to textile, fashion, and Korean paper industry. Six kinds of vests with the same fashion material using the Korean traditional paper were manufactured in order to investigate the images of materials in case of wearing them on the actual human bodies. As the results of image assessment for the materials and the factor analysis, 'classical', 'natural', 'Korean traditional', 'rural' and 'luxury' images were presented as the representative image of the Korean traditional paper material. Making repeated patterns of stripes and zigzag by sewing-machine stitches showed the natural effect on Korean traditional paper. Well-matched harmony was shown between holes made by the needle in sewing and slits torn by the tension to the needle and the thread. Especially, transparency by irregular holes formed by artificial frictional washing could shown special formative arts harmoniously with semi-transparency of Korea traditional paper and touch of sewing yarn. After the unripe persimmon dyeing, holes made by the needle became more hard and tight. The changes were no longer shown by the artificial frictional washing and then fixed. As the result of applying the Korean traditional paper fashion materials with various patterns for the basic formed garments, it was shown that the common and simple garments were changed the garments with special formation which could be found on the art garments due to the creative touch and formative arts using the Korea traditional paper fashion material. A variety of formative application by means of the developed samples was suggested to enlarge the practicality. As the result of this study, it was discovered that the possibility and application of fashion goods through the developed samples made of Korean traditional paper.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.401-406
• /
• 2005

The objective of this field research is to determine consumer's fashion sense and provide helpful information to manufacturers when planning designs and merchandizing strategies. This study's purpose was to observe what was being worn, colors and tones. The method of research was fixed point observation using digital photos. The subjects of the research were female college students, 18-22 years old. The T-shirt has become the representative item for casual and comfortable wear by the female college students. Pants and blue jeans were worn more often than skirts as a lower garment. This shows that the students think about their activities when choosing a lower garment. The majority of these students chose clothing that functioned well for their school activities. Among students that wore skirts about half wore a functional knee length while the other half wore a more fashionable mini-skirt. These students appear to care about both fashion and function. Blue was especially popular, with 70.4% of all lower garments being blue. This effect makes the body look thinner and may be one reason why blue is so popular. White is a popular color as an upper garment. White upper garments are easily matched with any color, while blue upper garments coordinate well with similarly colored blue lower garments. The distribution of upper garment color is significantly influenced by the seasons. Blue jean tones were many and varied, while upper garments were mostly weak tones and bright tones of pale, light and soft.

• The Research Journal of the Costume Culture
• /
• v.19 no.6
• /
• pp.1359-1371
• /
• 2011

The purpose of this paper is to compare two avatars made using direct and manual methods and to evaluate the fit and appearance of two virtual garments on the direct and manual avatars. In this study, two subjects were measured by $[TC]^2$ body scanner and the avatars and virtual garments were created by OptiTex software. The direct avatar was made by the direct importation of 3D body scan data and the manual avatar was made by manual input from extracted body measurement. Two virtual garments in a tank-top were evaluated by distance, transparency, and stretch maps. In the results of comparing difference of the direct and manual avatars, the bust and back of the manual avatar are protruded slightly more than that of the direct avatar and the manual avatar is slightly larger dimensions at the bust, waist, abdomen, and hip area in the side view in case of subject 1 and 2. In the results of comparing difference of the fit and appearance of two virtual garments on the direct and manual avatars, in case of subject 1 and 2, the back of the virtual garment on the manual avatar are protruded more than that of the direct avatar. Also, the ease in the bust area of the virtual garment on the manual avatar with a projected bust area was smaller than that of the virtual garment on the direct avatar and the stretch of that of the manual avatar was also high in the bust area. The results of this study are expected to be used as basic information in the apparel industry using virtual try-on technology.

• Fashion & Textile Research Journal
• /
• v.7 no.6
• /
• pp.665-672
• /
• 2005

The purpose of this study was to assess the feasibility and the effects of near infrared lighted garments on thermo-physiological responses in human body. Seven healthy adult men were recruited for this study. All subjects were informed the contents and purpose of this study. The experiment was carried out in a climate chamber of $32^{\circ}C$, 60%RH with 'Rest', 'Exercise' and 'Recovery' period. The experimental garments consisted of briefs, undershirts(sleeveless), nightclothes, T-shirts, knee-trousers and socks. Subjects participated in two experiments, one was wearing near infrared lighted garments(NIR-O), the other was wearing regular garments(NIR-X). The order of experiment was randomized, and subjects wore experimental garments before 24 hours in order to benefit by near infrared light. Measurement items included rectal temperature ($T_{re}$), mean skin temperature ($\bar{T}_{sk}$), sweat rate, heart rate, oxygen uptake and subjective sensation. The results are as follows: As to the variation of rectal temperature and mean skin temperature, value of wearing NIR-X was higher than value of wearing NIR-O, indicating a significant level of difference (p<.001). Sweat rate under NIR-O and NIR-X condition were 575.35 g and 535.75 g, respectively. Heart rate value of NIR-X condition was higher than NIR-O. Oxygen uptake measured during experiment was the higher in NIR-X condition with significant difference (p<.001). In the subjective sensation, the value of NIR-O condition was higher than NIR-X condition without significantly difference.

• Fashion & Textile Research Journal
• /
• v.16 no.5
• /
• pp.776-784
• /
• 2014

KS K 0051(2009) was established in 1990 and revised in 1994, 1999, 2004 and 2009. Recently the structure of apparel production and distribution are changing like as small quantity batch production, increase of importing abroad apparel and increase of on-line shopping mall. Based on Social and economic conditions, examine the potential for use of KS K 0051(2009) standard sizing system for female adult's garments are needed. Through which, it was intended to suggestion for the revision of standard sizing system for female adult's garments which can facilitate communication among consumer, producer and sellers. The improvement point was discussed through review of the current KS K 0051 (2009) and abroad standard sizing system for female adult's garments, ISO 3637(1977), ISO 4416(1981), BS EN 13402-2(2002), BS EN 13402-3(2004), JIS L 4005(2001) and GB/T 1335.2(2008). Also, the revision of standard sizing system for female adult's garments was suggested using data of 6th Size Korea. As a result of this study, in the revision, formal wear, casual wear, training wear and under wear were separated to simplify the classification and the classification of body type were excluded. Also, it is possible that size designation was simplified through optional notation and letter code based on bust girth could be marked together in casual wear.

• Fashion & Textile Research Journal
• /
• v.22 no.2
• /
• pp.250-260
• /
• 2020

The purpose of the present study was to explore the most effective body region and cooling temperature to alleviate heat strain of workers in hot environments. We developed liquid cooling hood, vest, sleeves and socks and applied the water temperatures of 10, 15, 20, and 25℃ through the liquid cooling garments in a hot and humid environment (33℃ air temperature and 70% RH air humidity). A healthy young male participated in a total of 16 experimental trials (four cooling garments × four cooling temperatures) with the following protocol: 10-min rest, 40-min exercise on a treadmill and 10-min recovery. The results showed that rectal temperature, mean skin temperature, and ratings of perceived exertion during exercise; heart rate and diastolic blood pressure during recovery; and total sweat rate were lower for the vest condition than other garment conditions(p < .05). However, there was no differences in mean skin temperature among the four cooling garments when we compared the values converted by covering area(%BSA). When we classified the results by cooling temperature, there were no consistent differences in thermoregulatory and cardiovascular responses among the four temperatures, but 25℃ water temperature was evaluated as being the most ineffective cooling temperature in terms of subjective responses. In conclusion, the results indicated that wearing cooling vest with < 20℃ cooling temperature can alleviate heat strain of workers in hot and humid environments. If the peripheral body regions are cooled with liquid cooling garments, larger cooling area with lower cooling temperature than 10℃ would be effective to reduce heat strain of workers. Further studies with a vaild number of subjects are required.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.595-601
• /
• 2017

Advances in 3D garment simulation technology contribute greatly to consumers becoming more immersed in movies and games by realistically expressing the garments the characters in the movie or game are wearing. The fashion industry has reached a point where it needs to maximize efficiency in production and distribution to go beyond time and space in order to compete on the global market. The processes of design and product development in the fashion industry require countless hours of work and consume vast resources in terms of materials and energy to repeat sample production and assessment. Therefore, the design and product development tools and techniques must aim to reduce the sample making process. Therefore, this study aims to study a case for comparing the real garment sample making process to the virtual garment sample making process. In this study, we have analysed the differences between the real and virtual garment making processes by choosing designated patterns. As we can see from the study results, the real and virtual garments generally are made through similar processes in manufacturing, while the time consumed for each shows great variation. In real garment making, scissoring and sewing require the greatest number of work hours, whereas in virtual garment making, most of the time was spent in the simulation process.

• International Commerce and Information Review
• /
• v.11 no.1
• /
• pp.95-116
• /
• 2009

Korea-Us FTA negotiation started in February 2006 with a view to overcoming those uncertainties in the global market and was finally concluded in April, 2007. The Agreement was officially signed between ministers two month later and it is expected to be ratified this year even though the process is most likely to be painful in both countries by the political resistances. For the new President of the United States, effective leadership will depends largely on how to encourage domestic industries such as Automobile industry and Iron and Steel industry from the financial crisis. Many trading partners of US worry about US foreign trade policy changes to protectionism that might be unequal to bear. Korea textile industry is one of the major industry in Korea as it occupies 15% of total number of manufacturers, 11% of total employment and 5% of national GDP. Korea-US FTA will provide a breakthrough for bouncing back by exploring new market. US agreed to remove all tariff and non-tariff barriers to 87% of textile items under trading. This study shows that Korean textile industry has been losing it's competitiveness as textile quota system abolished in the year 2005 and has been traced by pursuers such as China, India and Vietnam. In case of woven fabric which was a representing export item of Korea lost price competitiveness against China after 2005. This study seeks the strategy of Korea textile industry in the US market by utilizing the capacity of KOTRA offices in US. All possible statistical data obtained in the US were used for analysing the competitiveness. Fabrics and Garments are analysed independently with a view to finding out real trends of textile market in US. This study also suggest Korea's textile industry strategic ideas obtained from the potential buyers to show the way to penetrate into US market.

• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.347-362
• /
• 2012

The analysis results of the characteristics of children's clothes for school girls from the 2006S/S-2010S/S collections reveal that the most frequent type of item composition was 2'PS & 3'PS. T-shirts were the popular kind of item for upper garments and pants for lower garments. The major silhouettes were H and A line. The predominant neckline was U, which was followed by camisole and V. The major collar styles were stand-up and flat. Chromatic colors were used more than achromatic ones and after white the most popular colors were blue, pink, red, black, navy, and green. The dominant color scheme was a two-color or three-color scheme. The percentage of solid and patterned material garments was the highest and the most popular pattern was flowers. The most popular style of garment had no decorative detail that was followed by one-item, two-item, and three-item decoration. The major kinds of decorative detail were frills, pleats, and prints.