• 감성과학
• /
• 제21권2호
• /
• pp.137-144
• /
• 2018

본 연구에서는 가변 통기성 스마트 의류의 제작을 위해 필요한 형상기억합금 액추에이터의 작동 조건을 파악하였다. 의복의 개방, 폐쇄와 같은 양방향 작동 시 형태 변형 시에만 전력을 소모하는 저전력 소모 액추에이터 개발을 위해 복수 채널의 일방향 형상기억합금을 이용하여 스위치로 작동되는 액추에이터를 설계하였으며 가장 효율적으로 작동할 수 있는 와이어의 직경과 전압인가 단위시간을 도출하였다. 선행연구 결과 도출된 양방향 작동이 가능한 일방향 형상기억합금의 직경 범위 내에서 Arduino 스위치를 제작하여 3.7V 전압인가 시 변화량을 분석한 결과 $0.4{\Phi}$의 액추에이터가 가장 적합한 것으로 나타났다. $0.4{\Phi}$ 형상기억합금와이어를 사용한 양방향작동 액추에이터의 개방, 폐쇄에 필요한 최적전압인가 시간을 도출하기 위해 액추에이터의 최대개방, 최소폐쇄 도달 전압인가 시간으로부터 50ms씩 감소, 증가 시키며 냉각 후 액추에이터의 내경을 비교하는 방식으로 측정한 결과 개방 동작에 필요한 최적 전압인가 단위시간은 4,100ms로 나타났다. 각 채널간의 발열에 의한 간섭을 최소화하기 위한 양방향간 작동 시 필요 딜레이 분석을 위해 상온에서 형상기억합금에 최적 전압입가 시간인 4.1초 동안 전원을 공급하고 가열 후 냉각까지의 과정을 열화상카메라로 촬영하여 형상기억합금 와이의 온도가 냉각시의 상변태온 이하로 하강하는 시점을 파악한 결과, 액추에이터의 양방향간 작동 딜레이는 1.8초 이상이 확보되어야 함을 파악할 수 있었다.

• 대한가정학회지
• /
• 제46권9호
• /
• pp.99-112
• /
• 2008

The increasing rate of obesity in school aged children has become a conspicuous social phenomenon in Korea. This has been linked to greater economic growth, increasingly westernized dietary habits, and a consumer driven society. Given that obesity can lead to social exclusion or unfavorable attention by other students in a school setting, the design of plus-size garments have become important for effective appearance management skills. This research aimed to establish a somatotype database for obese school boys, aged 10 to 12, in order to develop a sizing system for plus-size upper garments. In order to measure somatotype of average and obese school boys, five categories were recorded; height, obesity, length of trunk, thickness of neck and chest. For obese boys, subcutaneous fat thickness and position of B.P/shoulder point factors were recorded. Obesity factor was subdivided into overall and specific ones, and while the deviation of obese body types was severe compared to the average type. Obese body type showed significantly higher measurements in width, girth, thickness. This is linked to the fact that the frequency ratio of obesity increases with age. Stature and chest were chosen as control dimensions for boys' wear. As crosstabulation of stature(5cm interval) and chest girth(2, 3 and 4cm), and stature(5cm interval)/chest girth(3cm interval) sizing system showed, the most effective cover ratio and adaptability to the data distribution $25{\sim}75$ quartile. Based on the findings, 10 sizes were formulated for average body type, while 18 sizes were formulated for obese type, whose size cover ratios were 48% and 62.9%, respectively. The primary ranges of stature were $145cm{\sim}150cm$, while those of chest girth were $79{\sim}82cm$. Each size was declared as "chest-somatotype{A(average)/O(obesity)-stature". This study proposed a plus-size upper garment sizing systems for obese boys, accompanied with reference measurements for suit, casual wear and underwear. The finding showed that the two systems were totally separate and not overlapping, meaning that plus-size sizing system is essential for obese school boys. The obesity type system had more size and wider range specs.

• 패션비즈니스
• /
• 제6권2호
• /
• pp.29-40
• /
• 2002

Honor guards‘ dress represented by royal carriage parade. This thesis studies the ceremonial dress worn by the ceremonial troops during the Hwa-sung Hang-hang Ban-cha drawing (華城幸行班次圖) in the Chosun dynasty of King Jung-jo. The purpose of this study is to understand the national level ceremony by closely looking into the traditional ceremonial dress and the various signs that were used at these events thereby enhancing the cultural status of the Jung-jo King period. The Hwa-sung Hang-hang Ban-cha drawing(華城幸行班次圖) has its characteristics and also has commonality between the garments worn at these ceremonies. These garments are a traditional heritage brought down from many ages before and is a reflection of the changes that have occurred within our everyday life. Among these many records the Bancha-do(班次圖) is a representation of records that show what was worn by both nobles down to the ceremonial troops. The uniforms of the ceremonial troops were not only huge in size but also very diverse according to rank and grade. They used strong true colors with colorful flags, ceremonial items and musical instruments. These all added to the grandeur of the ceremony. The ceremonial flag was itself a symbol and was the core of the whole ceremony and parade. These ceremonial flags represented the heaven, sun, moon, hill and animals as well as supernatural gods. All these showed change in shape, color and content by age and time. Also the Yongmun Gichi(Dragon flag: 龍紋旗幟) is a supernatural being representing the power and wish of the ruler. The Chunsang-mun represents the indivisible relationship between man and heaven and also a metaphor for absolute power. A close look at ceremonial instruments show a direct representation towards power such as an axe, spear and sword and integrated with other large ceremonial items not only provided a shade but was also a representation of worship. These all were a more or less representation of authority. The musical instruments expressed the absolute authority of the ruler and maintained the marching order and also added grandeur to the parade. A summary of the ceremonial troops in the As seen above, these national ceremonies were a representation of the present power of authority and the will to rule. These ideas and the philosophy of “ruled by heaven” is represented here in the uniforms and the ceremony itself. The Bicentennial anniversary of the Nung - hang of February 1795 will be an excellent opportunity to show and inherit the tradition and recreation of our heritage. In this view we must look at the color and shape of traditional dress to be able to inherit and learn from our ancestors.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1998년도 춘계학술발표 논문집
• /
• pp.255-263
• /
• 1998

Dust-free garment prevents contamination which otherwise is caused by skin and clothes to protect from dust or dirt. Therefore, it requires high performance and should function as a working clothes. Clothes are a medium between human and thermal environmental system, and it is required to study human enviroment to ensure comfortableness of clothes and to satisfactorily go along with enviroment .This study investigates the physical and physiological features of dust-free garment used in the clean room at a semiconductor factory in oredr to scientifically clarify what the dust-free garmint is as well as to contribute to the design and development of high performance material and clothes. Three kinds of dust-free fabrics (DFG-I, DFG-II, DFG-III) which are being developed by a local company are used to manufacture dust-free garment. These dust-free garments are dressed and tested in such an enviroment as similar to semiconmemts with temperature at 23${\pm}$1$^{\circ}C$ and humidity at 50${\pm}$5%RH in order to investigate the thermo physiological and psychological features of human body. The results of this study are as follows. The results of this study are as follows. 1.The mean skin temperature was significantly different among the clothes, subjects and experimental time. Temperature tends to rise from the time of exercising load. Continuous motion coupled sealed clothes prevents heat transmittance, and temperature rises in the order of DFG-l, DFG-ll and DFG-lll as time course. 2.As for the skin temperature by local timperature is minimun on the head and torso and increares remarkably at the terminal part of human body. 3. As for the body mass loss was significantly higher in DFG-lll than DFG-l and DFG-ll. 4. Though there is no significant difference in the temperature within clothes among the kind of clothes temperature is 1$^{\circ}C$ higher in the back. Temperature within all the dust-free garments 29.7$^{\circ}C$ in the back and 31.3$^{\circ}C$ in the chest which belong to the comfort zone(31-33$^{\circ}C$). The relative humidity is 39.7%RH in the chest and 33.8%RH in the back which is slightly below the comfort zone(40-60%RH) 5. The thermal sensation belong to the comfort zone regardless of the kinds of clothes. The subjects feels a slight fatigue as times goes. As for the subjective sense of subjects the mean skin temperature as well as temperature and humidity within clothes show similar tendency. This means that they relate with each other.

• 패션비즈니스
• /
• 제12권5호
• /
• pp.1-13
• /
• 2008

This study is largely aimed at presenting ways to improve the working clothes and help companies create more positive images by suggesting designs of the clothes, which take into accounts the corporate image, symbolism, function and aesthetic appreciation through introduction of companies' CIP. And, it is significant to propose working clothes development condition and process with introduction of companies' CIP(Corporate Identity Program : work that systematize and simplify visually images which companies or public bodies have) A way of this study was made up with working clothes design development process which a student planned. First of all, this study looked into Company D's Corporate Identity Program(CIP) to develop the design that corresponds with the characteristics of the company's favorite design, working environment and demands of the employees. And, then, the study conducted a survey of 30 employees and intensive interviews with heads of four teams including the Safety Team, the Working Clothes Management Team and the General Affairs Team to find out the requirements of the clothes and the characteristics of the company. Based on them, the concrete image that the company pursues and the direction of design were set up through image positioning. In the end, three different concept designs were presented through image-mapping and the concrete design of each item was developed. A total of seven items including upper and lower garments (a jacket and trousers) for the spring-summer seasons, upper and lower garments (a jumper and trousers) for the winter season, cold-protecting vest and winter clothes (a coat and trousers) were presented in accordance with the three concepts. One of the concept designs, which was selected through evaluation by employees of Company D, was produced as a sample and then the final design was chosen after a discussion attended by the head of each team and representatives of the employees. Based on the aforementioned design planning, one design was selected from each of the three concept designs for production. And each of these was requested to special production enterprise and manufactured. Following the result of study, by looking into a case of a practical joint design project between a university and a company, this study suggested ideas for business to improve working clothes through the academic-industrial cooperation and presented conditions and process of design development. And, this study also aims to examine the feasibility of academic-industrial cooperation based on the cases in which enterprises and universities staged joint projects to develop working clothes.

• 한국군사과학기술학회지
• /
• 제11권2호
• /
• pp.101-108
• /
• 2008

This study attempted to develop the technology by gaseous ozone for decontaminating building affected by a model of biological weapon agent(Bacillus subtilis spores) instead of Bacillus anthracis spore. The use of ozone is attractive method from a practical point of view of decontamination procedure since it has strong oxidation power but no residue after application. We examined the disinfection efficiency of gaseous ozone to Bacillus subtilis spores which suspension was sprayed on different material surfaces and dried. Three different types of gaseous ozone was applied : dry ozone, dry ozone with humidified air, and water bubbled wet ozone. Dry ozone(1500ppm) failed to achieve any significant inactivation for 2hrs. However, six log reduction of B. subtilis spore was achieved within 30min by 1500ppm of water bubbled wet ozone. This result shows the noticeable inactivation efficiency by gaseous ozone compared with previous studies. Good performance by wet ozone was also found for military material surface.(i.e. : gas mask hood, protective garments, army peinted metal surface).

• 한국의류학회지
• /
• 제10권1호
• /
• pp.97-104
• /
• 1986

The change and development of costume are related to the cultural and socioeconomic factors. In the 18th century the mode of the women's costume in France was greatly influenced by the Rococo style. Elegance and exaggerated ornaments were the major characteristics of the woman's cos-tume in the Rococo period. The high hairdress and the widely hooped panier represented the typical Rococo fashion. From the second half of the 18th century onwards the aristocracy began to lose the battle with the bourgeoisie for political and economic power, and at the same time bourgeoisie fashion exerted an influence on court dress. The court fashion dominated the women's dress fashion in France up to the Revolution. Marie Antoinette, The Queen of Louis XVI, was one of the most influential fashion leaders in the lath century. The fashion, after attaining its highest point in 1770s, changed to a new direction in 1780s under Louis XVI. From that period onward the dimensions were smaller, hairdresses were not so high, and the trimming on the various garments was less liberal. In the mode, exaggeration was replaced by simplicity, and formality was replaced by functionalism.

• 한국의류학회지
• /
• 제22권4호
• /
• pp.482-492
• /
• 1998

With the purpose of developing a objective fitness evaluation system for knits, the basic bodice pattern for knit was drafted and the suitability of the altered pattern was evaluated. For each of nine different knits, six sleeveless shirts were made with patterns that were altered by different pattern alteration rate: 0%, 30%, 40%, 50%, 60%, or 70% of the stretch rate of the knit. The panel that was composed of 25 clothing specialists evaluated the fitness of the garments. The distance from the dress form landmark to the garment landmark was measured from each experimental garment. And the results of garment fitness evaluation and the measurement of distance from the dress form landmark to garment landmark were compared. The results of this study are as follows: There was high correlation(r$\geq$0.9) between the evaluation of the panel about the garment fit and the landmarks distance. The stretch rate of knits affected the evaluation of the garment fit. The stretch rate in course of knits affected on the garment fit at crosswise direction. The suitable pattern alteration rate was lower than 30% for the knits with high stretch rate in course. It was concluded that in order to get the appropriate knit bodice pattern length, the front bodice pattern must be less shorten than the back bodice pattern. The alteration rate at hip line must be lower than for waist or bust line.

• 복식
• /
• 제55권6호
• /
• pp.82-96
• /
• 2005

This study focuses on the bag design as a creative design resource rather than on typical bag design as shown in previous research. 1'he purpose of this study is to develop creative and harmonious upper garments in good combination of bags and the sides of clothing. This study was performed with female college students whose age are front 18 to 24. The results of this study are as follows. First, bags are ideal for creative fashion in respect that they reflect modern trend. Second, ornamental materials such as string, chain, and buckle, which used to be details of clothing, are useful to present the characteristics of bags more effectively. This result has shown that details of bags are important determinant of entire fashion details. Third, it expands the sphere of expression of the bag, so the possibility of expansion to a distinguished expression of fashion design is recognized. From the study, we understood the structural characteristics and changes of detail of bags, proposing that the bags take important part in fashion design developments.

• 한국의류산업학회지
• /
• 제16권6호
• /
• pp.1008-1016
• /
• 2014

This study aims to analyze the changes in the mechanical properties of woven fabrics(cotton, linen, wool, silk, and polyester) by bonding fusible interlinings with varying deniers(10D, 20D, and 30D) for a 3D virtual try-on system(one that a user to try garments through screens using Avatar) developed over the last decade. We experimented with four mechanical properties and thicknesses of twenty-three specimens of interlining bonded fabrics including face fabrics and interlinings by using the KES-FB-AUTO system. The results showed that the tensile property increased(LT and RT increased and WT decreased) as the denier of the interlining increased; however, the change was slight. In contrast, the bending and shear properties increased significantly as the denier of the interlining increased on both the warp and the weft. This showed evidence that the interlining gives the fabrics size stability. The compression property was slight changed as the tensile property varies depending on the fibers and the denier of interlining. As expected, the thickness increased by bonding the interlining as the denier of interlining increased. From these results, we conclude that 3D users need to reflect these changes of woven fabrics by bonding interlinings when they try screen fittings to accurately express the fabric reality of manufactured garment.