• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.28-35
• /
• 2000

In this paper, we design a ring inductor using the ferrite core to denoise the EMI(Electromagnetic Interference) for facsimile. The EMI for facsimile is radiated from the signal line of PSTN(Public Switching Telephone Network) between facsimile and PSTN. We denoise the radiated noise by inserting a ferrite core(Ni-Zn) between facsimile and PSTN. Even though we may denoise the radiated noise using two or more than two ferrite cores, we only concentrate on denoising EMI by adjusting number of turns of one ferrite core since it gives economical gain. As a result of measuring EMI using the designed inductor with 4 turns inserted in the line connected between facsimile and PSTN, the value of radiated emission is reduced below 30 dB$\mu$V/m.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.1-11
• /
• 2002

A multi-section DFB-LD shows optical bistability subject to externally injected light signal, then it has potential applications such as wavelength conversion and optical logic gates. In this paper, we have studied the optical bistability in multi-section DFB-LD using split-step time-domain model. It is confirmed that the multi-section DFB-LD, which is excited inhomogeneously, shows bistability. The optical bistable characteristics are investigated when input light is injected into a absorptive region. Simulation results show that multi-section DFB-LD works as a flip-flop depending on the set-reset optical pulse which has a few ns in switching time and a few pj in switching energy, so that it can act as a optical logic device. Besides, if we change the carrier lifetime and the differential gain coefficient, it is expected that the response time of optical output signal can be reduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1899-1906
• /
• 1998

In ATM switching system link bandwidth is one of the improtant resources. Thus ATM switching system must allocate the bandwidth to the users efficiently and guarantee the QoS. Especially to guarantee the QoS of the VBR traffic source such as video, users must declare the traffic characteristics and QoS expectations using UPC parameters. The CAC can use two multiplexig models in variation to link capacity and connection number. One is loseless multiplexing model; the second is a statistical multiplexing model. The loseless multiplexing model performs best when the number of mutiplexed sources is small, but as the number of multiplexed sources is increase the CAC must use the statistical multiplexing model. In this paper, the statistical multiplexing models are studied, which are suitable for high capacity ATM link on VBR traffic sources. The satistical multiplexing model and the loseless multiplexing model are combined. In statistical model we map the UPC parameters provided by new VBR connection to appropriate source traffic model. In the high capacity ATM link, as the connection number increases, the statical multiplexing gain increases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.397-401
• /
• 2005

In this paper, a slot-coupled microstrip antenna with switchable polarization is proposed for the polarization diversity applications in the complicated communication environment. The proposed antenna is fed by a microstrip line through one of two slots located with the interval of $\lambda{g}/4$ in the ground plane. By switching the PIN diode between opened and shorted termination which is located at the tip of the microstrip line, the switching function between horizontal and vertical polarization was confirmed experimentally. The measured resonant frequencies of the fabricated antenna are $2.41\;\cal{GHz}\;2.40\;\cal{GHz}$ and the cross polarization levels are $19\;\cal{dB},\;23\;\cal{dB},\;the\;-10\;\cal{dB}$ return loss bandwidths are $95\;\cal{MHz}\;100\;\cal{MHz}$ in horizontal and vertical polarization, respectively, and the antenna gain is almost $6\;\cal{dBi}$.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.893-902
• /
• 2002

MPLS enables efficient explicit routing, and thus provides great advantages in supporting traffic engineering. Exploiting this capability, we Propose a load balancing scheme which deploys a multipath routing. It is named LBM (Load Balancing in MPLS networks), and targets at efficient network utilization as well as performance enhancement. LBM establishes multiple LSP (Label Switched Path)s between a pair of ingress-egress routers, and distributes traffic over these LSPs at the new level. Its routing decision is based on both the length and the utilization of the paths. In order to enhance the efficiency of a link usage, a link is limited to be used by shorter paths as its utilization becomes higher Longer paths are considered to be candidate alternative paths as the utilization of shorter paths becomes higher. Simulation experiments are performed in order to compare the performance of LBM to that of static shortest path only scheme as well as the other representative dynamic multipath traffic distribution approaches. The simulation results show that LBM outperforms the compared approaches, and the performance gain is more significant when the traffic distribution among the ingress-egress pairs is non-uniform.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1
• /
• pp.34-40
• /
• 2010

As internet spread widely, various service which use the internet have been provided. One of the service is a internet phone. Its usage is increasing by the advantage of cost. But it has a falling off in quality of speech. because it use packet switching method while existing telephone use circuit switching method. Although vocoder use PLC (Packet Loss Concealment) algorithm, it has a weakness of continuous packet loss. In this paper, we propose methods to improve a lowering in quality of speech under continuous loss of packet by using PLC algorithm used in advanced G.729 and G.711. The proposed methods are LP (Linear Prediction) parameter interpolation, excitation signal reconstruction and excitation signal gain reconstruction. As a result, the proposed method shows superior performance about 11%.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1324-1335
• /
• 2016

This article explores the speed regulation problem of permanent magnet synchronous motor (PMSM) systems subjected to unknown time-varying disturbances. A continuous sliding mode control (CSMC) technique is introduced for the speed loop to enhance the robustness of PMSM systems and eliminate the chattering phenomenon caused by high-frequency switch function in the conventional control law. However, the high control gain of the CSMC law in the presence of strong disturbances leads to large steady-state speed fluctuations for PMSM systems. In many application fields, PMSM systems are affected by time-varying disturbances instead of constant disturbances. For example, electric bicycles are usually affected by changing environmental disturbances, including wind speeds, road conditions, etc. These disturbances may be in the form of constant, ramp, and parabolic disturbances. Hence, a generalized proportional integral (GPI) observer is employed to estimate these types of disturbances. Then, the disturbance estimation method and the aforementioned CSMC method are combined to establish a composite sliding mode control method called the CSMC+GPI method for the speed loop of PMSM systems. Contrary to the conventional sliding mode control technique, the proposed method completely eliminates the chattering phenomenon caused by the switching function in the conventional control law. Moreover, a small control gain for the CSMC+GPI method is chosen by feed-forwarding estimated values to the speed controller. Hence, the steady-state speed fluctuations are small. The effectiveness of the proposed control scheme is verified by simulation and experimental result.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.143-146
• /
• 2012

All-optical data extraction, one of the key technologies for all-optical computing and optical communication to perform add-drop, packet switching, and data reset, etc., is experimentally demonstrated by using cross-gain modulation (XGM) of semiconductor optical amplifiers (SOAs). Also, all-optical data extraction based on numerical simulation is performed by using the VPI simulation tool. In this paper, the suggested optical system based on SOAs shows the potential for high speed, and highly integrable and low power optical data computing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3205-3214
• /
• 1996

In this paper, the microstrip phased array antennas with coupling-slots for the base station of mobile communication is proposed and anlyzed with accurate analysis method which is based on both reciprocity principle and full-wave analysis. The basis functions used for the numerical analysis are determined depending upon the accuracy, convergence properties of the solution, and the computation time. The patch uses 3 EB mode and the slot uses IPWS mode. The designed phased array antenna has 8 slot-coupled microstrip patch array elements and the beam scanning capability is obtained by using the 4-bit PIN-diode phase shifters as switching devices which are consisted of the loaded line phase shifters for 30.deg. and 60.deg. and the reflection type phase shifters for 90.deg. and 180.deg. repectively. The 4-bits phase shifters which aremade by connecting each phase shifter have about 2.deg.-3.deg. phase errors and their insertion loss are about 3dB for each phase state. The fabricated 8-element phased array antenna with 4-bits phase shifters provides 12.deg.-14.deg. beamwidths depending on the scanning angle and is capable of scanning its beam to .+-.45.deg. with 9.deg. intervals, and the gain 12dBi. The overall results show that the slot-coupled phased array antenna has great advantages of wideband, high gain and reduced spurious radiation. Also, the antenna can be made small and thin. Furthermore, the scanning property of this antenna allows for its application in several areas, such as mobile communication system and PCS.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.61-68
• /
• 2010

In this paper, we investigate the performance of ARQ-aided Time Switched Transmit Diversity (ARQ-TSTD) applying the multi-level control signaling in the WCDMA LCR-TDD system. Proposed ARQ-TSTD system applies the multi-level control signaling scheme in which the receiver sends the response signal (ACK or NACK signal) to the transmitter and defines NACK2 signal for multi-level control. Transmitter utilize the NACK2 control signal to the postponement of transmission and multi-user scheduling scheme proposed by this paper. Simulation results demonstrate that the proposed postponement of transmission and multi-user scheduling scheme yield about 1.3dB, 1.4dB performance gain respectively, compared with the conventional ARQ-TSTD with antenna switching scheme in tenn of the frame error rate (FER) for mobile speed of 3km/h and FER value of 10%. In addition, 14% and 11.5% of throughput gain respectively is shown when Eb/N0=-3dB.