• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.129-133
• /
• 2012

Coordinated multi-point transmission (CoMP) is a candidate technique for next generation cellular communications systems. One of the primary elements discussed in LTE-Advanced technology is CoMP, which can improve cell edge user data rate as well as spectral efficiency due to multiple input multiple output - orthogonal frequency division multiplex (MIMO-OFDM). We consider a system with multiple cells in which base stations coordinate with each other by sharing user channel state information (CSI), which mitigates inter cell interference (ICI), especially for users located at the cell edge. We introduce a new user scheduling method of ICI cancellation and the loss reduction of effective channel gain during the beamforming process, the proposed method improves the system sum rate, when compared to the conventional method by an average of 0.55bps/Hz in different number of total users per cell. It also outperforms the conventional method by approximately 0.38bps/Hz using different SNRs.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.677-684
• /
• 2015

Recently, orthogonal frequency-division multiplexing (OFDM) was applied to VLC systems owing to its high rate capability. On the other hand, a real-valued unipolar OFDM signal for VLC significantly reduces bandwidth efficiency. For practical implementation, channel estimation is required for data demodulation, which causes a further decrease in spectral efficiency. In addition, the large fluctuation of an OFDM signal results in poor illumination quality, such as chromaticity changes. This paper proposes a spectrally efficient method based on a hidden-pilot-aided precoding technology for VLC with less flickering than a conventional OFDM-based method. This approach can obtain channel information without any loss of bandwidth efficiency while ensuring illumination quality by reducing the flickering effect of an OFDM-based VLC. The simulation results show that the proposed method provides a 6.4% gain in bandwidth efficiency with a 4% reduction in flicker compared to a conventional OFDM-based method.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.346-348
• /
• 2016

Coordinated multi-point transmission is a candidate technique for next-generation cellular communications systems. We consider a system with multiple cells in which base stations coordinate with each other by sharing user channel state information, which mitigates inter-cell interference (ICI), especially for users located at the cell edge. We introduce a new user scheduling method that considers both ICI and intra-cell orthogonality. Due to the influence of ICI cancellation and the loss reduction of effective channel gain during the beamforming process, the proposed method improves the system sum rate, when compared to the conventional method, by an average of 0.55bps/Hz for different numbers of total users per cell.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.720-725
• /
• 2010

In AGPS method, user position can be obtained even in the shadow region by improving signal sensitivity. A hybrid long integration scheme employing both coherent and non-coherent integration method is commonly used in AGPS receivers. Because coherent loss increases as residual frequency become large, residual frequency should be minimized to maximize coherent integration gain. This paper presents performance analysis of residual frequency estimator using FFT in fine-time assistance AGPS method. Considering the hardware complexity and the estimation accuracy, optimal length of FFT is proposed for GPS L1 C/A signal. Signal sensitivity for estimating the residual frequency is also analysed. By field experimental results, it is found that the residual frequency can be successfully estimated using 1 second snap-shot data when GPS signal strength is larger than -150 dBm and its RMS error is 3Hz.

• Journal of the Korean Professional Engineers Association
• /
• v.30 no.5
• /
• pp.82-95
• /
• 1997

A Study of Improvement in Reactor Thermal Power Measurement Method using Kalman Filter. The objectives of the safety analysis of nuclear power plants are to maintain the surface temperature of fuel and fuel cladding within limit value in case of Loss of Coolant accident (LOCA) so that it ensures the safety and reliability of nuclear power plants. The new technique evaluating the reactor power and improvement of existing plant system increase the safety margin of nuclear power plant operation, and accordingly, economic effect will be anticipated. Hereby, 1 would like to introduce reactor power measurement method using Kalman filter that enables to calculate the reactor power more precisely combining the parameters, for example, turbine output as the 1 st stage pressure of high pressure turbine, and reactor power using energy equilibrium relation. It is expected that the new technique will enhance the accuracy of measurement of reactor power and maintain the reliability of nuclear power operation by increasing operational safety margin, and gain the economic benefit

• Journal of Korea Multimedia Society
• /
• v.11 no.12
• /
• pp.1739-1748
• /
• 2008

When we conduct a data mining procedure on sample data sources, several rules are generated. But some rules are redundant or logically disjoint and therefore they can be removed. We suggest a new rule minimization algorithm inspired from logic synthesis to improve comprehensibility and eliminate redundant rules. The method can merge several relevant rules into one based on data mining and logic synthesis without high loss of accuracy. In case of two or more rules are candidates to be merged, we merge the rules with the attribute having the lowest information gain. To show the proposed method could be a reasonable solution, we applied the proposed approach to a problem domain constructing user preferred ontology in anti-spam systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5571-5578
• /
• 2015

In this paper, we analyzed Alamouti based the MIMO-OFDM system in an underwater vertical communication channels. These in consideration both the transmission loss the multipath loss which is suitable for underwater environment are necessary method to improve the efficiency and communication performance in underwater communication. This paper is modeled in an environment that caused the error, considered each simulated the multi-path loss, transmission loss, the Doppler spread in order to implement a practical communication environment and simulated through the MIMO-OFDM system of Alamouti STBC method. The MIMO-OFDM system 2Tx-2Rx of Alamouti STBC scheme in underwater vertical communication system is obtained about 3~5 dB gain as compare with its 2Tx-1Rx scheme with reference $10^{-3}$ BER.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.80-91
• /
• 1999

We present various optimal grating structures which give the low threshold gain, good modulation characteristics, small effective linewidth enhancement factor, and large fabrication tolerance in complex-coupled MQW DFB lasers with absorptive gratings. To obtain these, we calculate the complex coupling coefficients using the extended additional layer method and the threshold gain including the modal loss in the absorptive grating region for rectangular and trapezoidal gratings. Based on the comparison of the results for various possible absorptive grating structures, the design guidelines are presented to obtain the low threshold gain or large fabrication tolerance. Among the grating structures studied, the double grating structure consisting of the absorptive grating on the index grating has the largest fabrication tolerance for the threshold gain and the coupling strength. The fabrication tolerance for the coupling ratio is very large for all the grating structures studied.

• Journal of electromagnetic engineering and science
• /
• v.16 no.3
• /
• pp.169-181
• /
• 2016

This work presents a new method for enhancing the performance of a dual band Planer Inverted-F Antenna (PIFA) and its lumped equivalent circuit formulation. The performance of a PIFA in terms of return loss, bandwidth, gain, and efficiency is improved with the addition of the proposed open stub in the radiating element of the PIFA without disturbing the operating resonance frequencies of the antenna. In specific cases, various simulated and fabricated PIFA models illustrate that the return loss, bandwidth, gain, and efficiency values of antennas with longer optimum open stub lengths can be enhanced up to 4.6 dB, 17%, 1.8 dBi, and 12.4% respectively, when compared with models that do not have open stubs. The proposed open stub is small and does not interfere with the surrounding active modules; therefore, this method is extremely attractive from a practical implementation point of view. The second presented work is a simple procedure for the development of a lumped equivalent circuit model of a dual band PIFA using the rational approximation of its frequency domain response. In this method, the PIFA's measured frequency response is approximated to a rational function using a vector fitting technique and then electrical circuit parameters are extracted from it. The measured results show good agreement with the electrical circuit results. A correlation study between circuit elements and physical open stub lengths in various antenna models is also discussed in detail; this information could be useful for the enhancement of the performance of a PIFA as well as for its systematic design. The computed radiated power obtained using the electrical model is in agreement with the radiated power results obtained through the full wave electromagnetic simulations of the antenna models. The presented approach offers the advantage of saving computation time for full wave EM simulations. In addition, the electrical circuit depicting almost perfect characteristics for return loss and radiated power can be shared with antenna users without sharing the actual antenna structure in cases involving confidentiality limitations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1056-1064
• /
• 2010

This paper presents the approximate analysis method for the symmetric transmission line crossing the aperture in an backplane. The method of moments is used to determine the aperture impedance for the construction of the equivalent transmission line that the aperture impedance apply to the transmission line as the shunt impedance. As the results, the insertion loss increases at the specific frequency range for the impedance matching. In the case of the mismatching, we are confirmed to the insertion gain at the specific frequency. Also the horizontal length of the aperture affects to the transmission line better than vertical length. The measurement of the insertion loss is performed to verify the theoretical analysis.