• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.236-242
• /
• 2019

An Nd:YAG slab structure was designed for a high-power zigzag slab laser amplifier based on computational simulation of the wavefront distortion. For the simulation, the temperature distribution in the slab was calculated at first by thermal analysis. Then, the optical path length (OPL) was obtained by a ray tracing method for the corresponding refractive index variation inside the slab. After that, the OPL distribution of the double-pass amplified beam was calculated by summing the results obtained for the first and second passes. The amount of wavefront distortion was finally obtained as the peak-to-valley value of the OPL distribution. As a result of this study, the length and position of the gain medium were optimized by minimizing the transverse wavefront distortion. Under the optimized conditions, the transverse wavefront distortion of the double-pass amplified beam was less than $0.2{\mu}m$ for pump power of 14 kW.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.2
• /
• pp.53-63
• /
• 2021

Small and medium-sized enterprises(SMEs) continue to adopt ICT to gain an edge in organizational innovation and competition. This has a management advantage, but it also brings vulnerabilities as to cyber security. Therefore, the purpose of this study is to conduct an exploratory study on the cyber security situation of SMEs. A survey was conducted on Korean SMEs to determine how well they are connected to ICT and how much they are exposed to cyber security threats. The results suggest two things. First, Korean SMEs are well connected to ICT, but there is a gap between the actual adoption and human recognition of its importance. Second, security threats and breaches affect the majority of SMEs, but several problems including costs have not been properly evaluated. The results of this study are expected to help improve the cyber security management system of Korean SMEs.

• International Journal of Advanced Culture Technology
• /
• v.9 no.2
• /
• pp.130-135
• /
• 2021

Because of the COVID-19 epidemic, many countries have made the obligation to wear masks normal. Wearing masks in public places has become a must. At present, wearing a mask to participate in sports makes it very common. People seek to gain health through exercise but ignore the potential respirato-ry health threat. That is, wearing a mask will cause a decrease in oxygen content in the body. This neg-ative impact becomes more prominent as the wear-ing time and oxygen consumption increase. To pro-tect people from viruses and enjoy a healthy life. This paper proposes a breathing pattern that im-proves blood oxygen saturation while wearing a jogging mask and walking. Namely, shouting breathing pattern. Use a pulse oximeter to measure the blood oxygen saturation of running at different speeds and compare the normal breathing pattern and the shouting breathing pattern. The results show that the shouting breathing pattern has a sig-nificant improvement in the blood oxygen satura-tion of low-speed walking and medium-speed jog-ging.

• Corrosion Science and Technology
• /
• v.21 no.1
• /
• pp.21-31
• /
• 2022

Potentiodynamic polarization, EIS measurements, quantum chemical calculations, and molecular dynamic simulations were used to investigate the corrosion behavior of mild steel in 0.5 M aqueous hydrochloric acid medium in the presence or absence of nystatin drug. Potentiodynamic tests suggested that this molecule could act as a mixed inhibitor due to its adsorption on the mild steel surface. The objective of this study was to exploit theoretical calculations to gain a better understanding mechanism of inhibition. Calculating the adsorption behavior of the investigated molecule on Fe (1 1 0) surface was accomplished using Monte Carlo simulation. Molecules were also investigated using Density Functional Theory (DFT), specifically PBE functional, in order to identify the link between molecular structure and corrosion inhibition behavior of the compound under investigation. Adsorption energies between nystatin and iron were estimated more accurately by utilizing Molecular Mechanics calculation with Periodic Boundary Conditions (PBC). Estimated theoretical parameters significantly assisted our understanding of the corrosion inhibition mechanism exhibited by this molecule. They were found to be in accord with experimental results.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.32.2-32.2
• /
• 2021

Radio relics, Mpc-size elongated diffuse radio emissions found at galaxy cluster outskirts, are known as the result of shock acceleration during the cluster merger. Theories have claimed that low Mach number shocks are too inefficient to create the observed properties of radio relics. Alternative scenarios such as fossil cosmic ray electrons (CRes) from AGNs are required to explain the observations. However, how exactly the fossil CRes from AGNs can supply the Mpc-size radio relic is still an open question. In this study, we present our recent uGMRT radio observation results of the merging galaxy cluster Abell 514. We found three remarkable AGN jet tails that may have undergone multiple reorientations and extend nearly 800 kpc. Using multi-frequency data, we have performed spectral analysis along the AGN tails and track how the tails lose or gain energy as they propagate in the intracluster medium. We will discuss whether these AGN jets can provide sufficient seed CRes to radio relics.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.575-578
• /
• 2005

We report on a low-cost V-band wireless transceiver with no use of any local oscillator in the receiver block using a self-heterodyne architecture. V-band Microwave monolithic IC (MMIC) modules were developed to demonstrate the wireless transceiver using coplanar waveguide (CPW) and GaAs PHEMT technologies. The MMIC modules such as the MMIC low noise amplifier (LNA), medium power amplifier (MPA) and the up/down-mixer were installed in the transceiver system. To interface the MMIC chips with the component modules for the transceiver system, CPW-to-waveguide fin-line transition modules of WR-15 type were designed and fabricated. The fabricated LNA modules showed a $S_{21}$ gain of 8.4 dB and a noise figure of 5.6 dB at 58 GHz. The MPA modules exhibited a gain of 6.9 dB and a $P_1$ $_{dB}$ of 5.4 dBm at 58 GHz. The conversion losses of the up-mixer and the down-mixer module were 14.3 dB at a LO power of 15 dBm, and 19.7 dB at a LO power of 0 dBm, respectively. From the measurement of V-band wireless transceiver, a conversion gain of 0.2 dB and a P $_{1dB}$ of 5.2 dBm were obtained in the transmitter block. The receiver block showed a conversion gain of 2.1 dB and a P $_{1dB}$ of -18.6 dBm. The wireless transceiver system demonstrated a successful data transfer within a distance of 5 meters.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.3
• /
• pp.210-219
• /
• 2005

We report on a low-cost V-band wireless transceiver with no use of any local oscillator in the receiver block using a self-heterodyne architecture. V-band millimeter-wave monolithic IC (MMIC) modules were developed to demonstrate the wireless transceiver using coplanar waveguide (CPW) and GaAs PHEMT technologies. The MMIC modules such as the MMIC low noise amplifier (LNA), medium power amplifier (MPA) and the up/down-mixer were installed in the transceiver system. To interface the MMIC chips with the component modules for the transceiver system, CPW-to-waveguide fin-line transition modules of WR-15 type were designed and fabricated. The fabricated LNA modules showed a $S_{21}$ gain of 8.4 dB and a noise figure of 5.6 dB at 58 GHz. The MPA modules exhibited a gain of 6.9 dB and a $P_{1dB}$ of 5.4 dBm at 58 GHz. The conversion losses of the up-mixer and the down-mixer module were 14.3 dB at a LO power of 15 dBm, and 19.7 dB at a LO power of 0 dBm, respectively. From the measurement of V-band wireless transceiver, a conversion gain of 0.2 dB and a $P_{1dB}$ of 5.2 dBm were obtained in the transmitter block. The receiver block showed a conversion gain of 2.1 dB and a $P_{1dB}$ of -18.6 dBm. The wireless transceiver system demonstrated a successful data transfer within a distance of 5 meters.

• Journal of agriculture & life science
• /
• v.44 no.1
• /
• pp.33-42
• /
• 2010

This study was conducted to estimate the effects of breed, sex, Farm-Scale and environment on average daily gain, age at 90kg, backfat thickness, eye muscle area and lean percent of pig. The total number of pig used in this study was 30,525 head consisted of 5,902 Landrace, 18,022 Yorkshire, and 6,601 Duroc on 2004 to 2008. The covariance used in the model to adjust age at the final test. The average daily gain, age at 90kg, and lean percent were significantly superior in medium Farm-Scale. However Backfat thickness and Eye muscle Area were significantly superior in small Farm-Scale. In conclusion this study suggest that breed, sex, test year, test season, Farm-Scale and environment may affect to average daily gain, age at 90kg, backfat thickness, eye muscle area and lean percent. The study about the Farm-Scale has to do continually more than now, and this study will be contributed to development of the pig industry.

• Korean Journal of Optics and Photonics
• /
• v.12 no.2
• /
• pp.135-142
• /
• 2001

Recently, plastic optical fiber draws a lot of attention as a new transmission medium for local area network (LAN) and home network applications. As PMMA based GI-POF (Graded Index Plastic Optical Fiber) has very low loss at about 500 nm and 650 nm wavelengths, it is very important to have a compact ultra short optical pulse source at these wavelength windows. In this paper, we have investigated detailed characteristics of gain switched laser system by using a commercially available low cost RF devices and an InGaAlP Fabry Perot semiconductor laser operating at 650 nm wavelength. The shortest optical 'pulse obtained was 33 psec with 1 GHz repetition rate. Depending on the DC bias current and the modulation frequency, the FWHM and the pulse energy of the gain switched pulses show 33.3-82.8 psec and 0.97-9.69 pI respectively. Also, the spectral bandwidths for CW and gain switched operations are 0.44 nm and 1.50 nm. We believe that these results are quite useful for high bit rate optical transmission applications with PMMA based plastic optical fibers in addition to estimate properties of ultra fast optical components and electro-optic devices. vices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12A
• /
• pp.1153-1160
• /
• 2005

OFDM/OQAM(Offset QAM)-IOTA system requires the IOTA(Isotropic Orthogonal Transform Algorithm) function that has superior localization property in time and frequency domain instead of guard interval used for conventional OFDM/QAM system to be robust to multipath channel. Therefore, OFDM/OQAM-IOTA system has more spectral efficiency than conventional OFDM/QAM system. But, when channel estimation scheme for conventional OFDM/QAM system is applied straightforwardly to OFDM/OQAM-IOTA system, an intrinsic Inter- symbol-Interference is observed. So suitable preamble structure for the channel estimation scheme of OFDM/OQAM-IOTA system is required. In this paper, we propose a new preamble structure that is appropriate to OPDM/OQAM-IOTA system and then perform ideal channel estimation and practical channel estimation in low-to-medium mobile speed and compare them with conventional OFDM/QAM system. Simulation results show that OFDM/OQAM-IOTA system with proposed preamble structure has 1.5 dB Eb/NO gain on Target BER $10^{-3}$ and about $25\%$ transmission rate gain against the conventional OFDM/QAM system considering quarter of FFT size as guard interval size.