• 한국정보통신학회논문지
• /
• 제25권6호
• /
• pp.853-856
• /
• 2021

In this paper, a low noise amplifier having high gain and low noise by using input and inter stage matching circuits has been designed. A current-reused two-stage common-source topology is adopted, which can obtain high gain and low power consumption. Deterioration of noise characteristics according to the source inductive degeneration matching is compensated by adopting additional matching circuits. Moreover trade-offs among noise, gain, linearity, impedance matching, and power dissipation have been considered. In this design, 0.18-mm CMOS process is employed for the simulation. The simulated results show that the designed low noise amplifier can provide high power gain and low noise characteristics.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.113-118
• /
• 2009

This paper is about design broadband impedance matching circuit for Coupler to improve power transfer efficiency in the power line communication (PLC) system. The Tchebycheff gain function algorithm is represented to design broadband matching circuit. A practical PLC Coupler impedance matching circuit is designed, and the characteristics for S11 and S21 of PLC coupler are enhanced comparing with unmatched one. This is done by maximizing the power transfer gain from modem to the load.

• Journal of information and communication convergence engineering
• /
• 제8권3호
• /
• pp.258-262
• /
• 2010

This paper represents design broadband impedance matching circuit for Coupler to improve power transfer efficiency in the broadband power line communication(BPLC) systems. The Butterworth gain function equalizer is used to design broadband matching circuit. A practical PLC Coupler impedance matching circuit is designed, and the characteristics for S11 and S21 of PLC Coupler are enhanced comparing with unmatched one. This is done by maximizing the power transfer gain from modem to the load.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.453-458
• /
• 2009

This paper presents two methods of designing a Broadband Impedance Matching (BIM) circuit for maximizing a power line communication (PLC) equipment (or Modem) signal injection into its load at any power line connection port. This optimal (BIM) circuit design is achieved in two phases: Butterworth gain function and Tchebycheff gain function. According to the comparison of simulation and practical results, the performances of two gain functions on BIM are discussed.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.152-155
• /
• 2011

This paper describes the role of mutual impedance and the transducer power gain which comes from key parameters to determine the amount of wireless power especially in a near-field environment. These two key parameters are applied to the two configurations; one is a dipole-dipole, and the other is a dipole-metal plate-loop configuration. Discussions are given on the achievable maximum power transfer between the sender and the receiver affected by the matching and the pass blockage.

• 한국융합학회논문지
• /
• 제8권11호
• /
• pp.85-91
• /
• 2017

본 논문에서는 비동기식 이동통신망의 동일 주파수 대역에서 신형 원격 기지국(RRH)과 중계기간에 RF 신호가 상호 정합이 가능하도록 하는 정합 모듈 시스템 설계에 관한 것이다. 이 정합 시스템은 통신 중에 있는 모듈의 RF Gain을 제어하고 품질상태를 모니터링 한다. 또한 Network의 RF 환경변화에 따라 RF Gain을 적절히 조절하여 중계기의 수신 특성에 맞게 정합 할 수 있는 기능을 부여하였다. 본 연구의 결과로 신형 기지국과 기존 중계기간에 상호 인터페이스 품질문제를 개선하였다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.150-153
• /
• 2000

In this paper, we have designed a 2 stage MMIC power amplifier which has flat gains of in-band and reasonable out-band cutoff characteristics using 0.5$\mu\textrm{m}$ MESFET libra교 of ETRI. For the 1st stave, we obtaind P$_{1dB}$ of 9.2 dBm and gain 10.8 dB using 6 finger D-MESFET and P$_{1dB}$ of 18.4 dBm and gain of 10.8 dB using 14 finger D-MESFET for the 2nd stage, which is power matched using LIBRA's embedded TUNER. Also in-band gain flatness and out-band cutoff characteristics are obtained by attaching LC tank in the output matching circuit. The designed 2 stage MMIC power amplifier has bandwidth of 0.95～2.8 GHz, gain of 20 dB and P$_{1dB}$of 17.2 dBm. Especially gain flatness of $\pm$0.8dB was obtained in 1.8～2.5 GHz frequency ranges. And chip size is 1.4$\times$1.4 mm..4 mm.

• 대한전자공학회논문지
• /
• 제26권5호
• /
• pp.10-17
• /
• 1989

마이크로와 광대역증폭기용 유손실 정합회로를 설계하기 위한 새로운 방법을 제시한다. 이 방법은 트랜지스터를 모델링 없이 측정된 산란계수를 이용하여 표시하며, 유손실 정합회로를 무손실 정합회로 사이에 유손실 직렬 임피던스 또는 병렬 어드미턴스가 삽입된 구조로 생각한다. 증폭기의 이득과 반사계수사이의 선형관계식을 유도하고 이를 이용하여 적절한 이득과 반사계수를 선택하는 법을 제시한다. 증폭기의 이득 및 반사계수와 유손실 정합 소자의 임피던스 사이에는 쌍 일차 변환의 관계가 있으며 일정 이득 원이나 일정 반사계수원을 임피던스 평면 또는 스미스 차트에 그려 적절한 정합 소지값을 선택 할 수 있다. 본 논문에서 제안된 방법이 유용함을 보이기 위하여 증폭기설계 예를 제시하였다.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.83-92
• /
• 2001

In this paper, the monopulse channel receiver which can be matched between channels through a wide bandwidth has been proposed. The effects of the gain and phase imbalance between channels on the slope of monopulse error signal were analyzed. Also, the matching method between channels in a wide bandwidth was proposed, by which monopulse slope could be stabilized. Using the implemented monopulse radar system the monopulse slope was measured in the anechoic chamber which include the moving horn antenna and the target signal generator. The results show that the wide band matching method is useful and applicable to various channel receivers

• 전자공학회논문지S
• /
• 제34S권5호
• /
• pp.73-85
• /
• 1997

In a drop-on-demand thermal ink-jet printer, the dot size of an ink droplet expelled from a printer depends on the absorption of the paper. This causes severe differences between output images on the different paper materials. In this paper, the color matching algorithm for different papers is proposed. To achieve corresponding color reproduction, dot gain compensatio nbased on saturation was applied to predict color reproduction on a printer. If the dot gain of pigment increases, the white portion of paper decreases while the saturation value increases monotonically. As the results of dot gain compensation, intensity change may appear. Therefore, an intensity compensation without any hue variation is followed to match the colors of different subtrates.