• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.3
• /
• pp.64-72
• /
• 1995

This paper proposes how to tune the gains of PI controllers in case of gain change in a process control system. Controllers of PI type have been used in industry and the gains of the controllers have been tuned by expert engineers. It, therefore, takes much time and efforts to tune the controllers. It is more difficult to find gains of multi-loop processes. The tuning method of a fuzzy tuner in this paper is developed based on the assumptions that the PI controllers are of analog type and are tuned off-line, and that the characteristic values must be supplied for the tuner. A Tuner using Fuzzy Logic(FLT1 is capable of showing presentlpast states of a process control system and finding gains of PI controllers. The verfication of the FLT is shown by various experiments.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.83-89
• /
• 2020

A microstrip feedline based open ended folded-slot antenna is proposed for ultra-wideband (UWB) applications. The prototype of the proposed antenna is fabricated on the FR4 dielectric substrate. The proposed antenna has a wide n-shaped slot that is useful for designing circuit components on the same printed circuit board (PCB) as that of the radio frequency (RF) modules. The proposed antenna use two kinds of slots as radiators, and each slots have different characteristics because of the different type of ends of the slot. The wideband characteristic can be obtained by resonances of each slot which are occurred at different frequencies. The measured impedance bandwidth (S₁₁≤ -10 dB) is 2.9-11.56 GHz, and the antenna peak gain is 2-4 dBi over the UWB range. The antenna has a stable omni-directional radiation pattern and only a small group-delay variation across the UWB passband. In addition, we present a modified design with band-notched characteristics of a 5 GHz wireless local area network (WLAN) frequency band.

• Journal of architectural history
• /
• v.17 no.3
• /
• pp.45-60
• /
• 2008

This study lists the vocabulary of the inscriptions on SeoGwol-YeongGeon-DoGam-UiGwe(西闕營建都監儀軌 1831). This study also deciphers and explains the meanings of them. In advance, this study compares them with the vocabulary of the national language in the middle ages and in modem times. There are two important missions in deciphering a transcription marking of the architectural vocabulary of UiGwe(儀軌). One is to gain an understanding of the reading method of transcription marking and the other is an explanation of what that means. As a result, we can correctly understand the UiGwe(儀軌) written in transcription marks. If we could decipher the transcription markings of the documents as it is, we cannot only recover plenty of vocabulary related with characteristic architecture in the age of the later Joseon Dynasty, but also correct wrongly used vocabulary in the present. As a result, we can standardize and adjust the vocabulary use of Korean traditional architecture. In advance, we can correct errors of spelling and mistaken explanations in the Korean Encyclopedia.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.336-342
• /
• 2008

This paper suggests a CPW-fed UWB antenna with new hexagonal slot. To increase the impedance bandwidth of an antenna, the proposed antenna is designed with the hexagonal patch. Polygonal slot is inserted in the hexagonal patch to avoid interference with IEEE 802.11a. The proposed antenna was fabricated on FR-4 substrate with a relative dielectric constant 4.7 and thickness of 1.6 mm and measured for VSWR Characteristic and group delay. The fabricated antenna shows that the gain flatness is 4 dBi except at the band for IEEE 802.11a.

• Composites Research
• /
• v.12 no.6
• /
• pp.83-89
• /
• 1999

The impact strength and fracture behavior of rubber/polymer composites were investigated with respect to two factors: (i) characteristic ratio, $C_{\infty}$ as a measure of chain flexibility of the polymer matrix and (ii) the rubber particle size in polymer blend system. In this study C was controlled by the composition ratio of polyphenylene oxide (PPO) and polystyene (PS). Izod impact test and fractographic observation of the fracture surface using scanning electron microscope were conducted. Finite element analysis were carried out to gain understanding of plastic deformation mechanism (shear yielding and crazing) of these materials. Shear yielding was found to be enhanced when the flexibility of matrix polymer was relatively low and the rubber particles were small.

• Childhood Kidney Diseases
• /
• v.24 no.1
• /
• pp.58-61
• /
• 2020

Pseudohypoaldosteronism type 1 (PHA1) is a rare salt-wasting disorder caused by resistance to mineralocorticoid action. PHA1 is of two types with different levels of disease severity and phenotype as follows: systemic type with an autosomal recessive inheritance (caused by mutations of the epithelial sodium channel) and renal type with an autosomal dominant inheritance (caused by mutations in the mineralocorticoid receptor). The clinical manifestations of PHA1 vary widely; however, PHA1 commonly involves hyponatremia, hyperkalemia, metabolic acidosis and elevated levels of renin and aldosterone. The earliest signs of both type of PAH1 also comprise insufficiency weight gain due to chronic dehydration and failure to thrive during infancy. Here, we report a case of renal PAH1 in a 28-day-old male infant harboring a novel heterozygous mutation in NR3C2 gene (c.1341_1345dupAAACC in exon 2), showing only failure to thrive without the characteristic of dehydration.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.360-363
• /
• 1995

In this paper, we describe the composition of frequency response bands based on experimental data of plants (controlled systems) with uncertainty and nonlinearity, and the robust stability evaluation of feedback control systems. Analysis and design of control systems using the upper and lower bounds of such experimental data would be effective as a practicable method which is not heavily dependent upon mathematical models such as the transfer function. First, we present a method to composite gain characteristic bands of frequency response of cascade connected plants with uncertainty and a recurrent inequality for the composition. Next, evaluation methods of the robust stability of multi-loop control systems obtained through feedback from the output terminals and multi-loop control systems obtained through feedback into the input terminals are described. In actual control systems, experimental data of frequency responses often depends on the amplitude of input. Therefore, we present the evaluation method of the nominal value and the width of the frequency response band in such a case, and finally give numerical examples based on virtual experimental data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.7
• /
• pp.621-630
• /
• 2006

The T-50 advanced trainer aircraft combines advanced aerodynamic features and a fly-by-wire flight control system in order to produce a stability and highly maneuverability. The flight control system both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. The T-50 employs the RSS concept in order to improve the aerodynamic performance in longitudinal axis and the longitudinal control laws employ the dynamic inversion with proportional-plus-integral control method. And, lateral-directional control laws employ the blended roll system both beta-betadot feedback and simple roll rate feedback with proportional control method in order to guarantee aircraft stability. This paper details the design process of developing lateral-directional control laws, utilizing the requirement of MIL-F-8785C and MIL-F-9490D. And, this paper propose the analysis of aircraft characteristics such as dutch-roll mode, roll mode, spiral mode, gain and phase margin about gains for lateral-directional inner loop feedback.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.10
• /
• pp.131-136
• /
• 2011

In this paper, we fabricate multi channel receiver for radar system. This receiver at X-band can be received 8 signal of an identical characteristic, dynamic range has more than 80[dB]. To process direct received signals, this system has the built-in two digital de-modulators which offer the minimum loss on the receiving signal path and has high stability by adding Built-In Test. The gain, noise figure, difference of amplitude and phase on the signal path is respectively 20${\pm}$2[dB], 19[dB], ${\pm}$2[dB], $10^{\circ}$ and below.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.53-59
• /
• 2011

In this paper wideband dipole antenna that is usable as PCS/WCDMA/WiBro/WiMax public relay station antenna is proposed. The proposed antenna that designed by using double ring structure improves bandwidth performance of existing dipole antenna to wideband performance. To verify wideband performance and isotropic radiation pattern of the proposed antenna, simulation and fabrication have progressed its radiation characteristic has measured and then compared with calculated result. Measured result is similar to calculated result and has gain of 2dB VSWR of 2:1 over 1.75~3GHz. It is considered that the dipole antenna that designed in this paper can be usable as PCS/WCDMA/WiBro/WiMax public relay station antenna.